New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

How to recovery nanoloco m5 with disable reset?

Hi, im from Spain, sorry for my bad english.

Im have a nanoloco m5 5 ghz antena from a old campany give me a internet where im live. this company is now close and im keep the antena but:

im dont have the user/password
im cannot access to the webadmin page
the reset botton are disable (press 30 seg. and nothing do it)

when im connect my computer she give me dhcp adrress like:
192.168.5.100
255.255.255.0
195.168.5.1

im find it with ubnt discovery but the web ui not load.

try to manual 192.168.1.22 ip from my computer to try access 192.168.1.20 but no work (any way im dont have the password!)

im find this in the forum: www.ubnt.com/forum/showthread.php?t=14892

somthing about jtag but all the link are dead!

Any idea how im can reset the antena? some tutorial?

Thx in advance,
Euphoria.
SuperUser
Dave-D
Posts: 25,529
Registered: ‎06-23-2009
Posts: 25529
Kudos: 3761
Solutions: 423
Registered: 06-23-2009

Re: How to recovery nanoloco m5 with disable reset?

Yes: a JTAG approach might work, but
you need to open the radio and install
a special cable. You need a special
interface and some software.

This is hardly worth it; buy a new radio.
Dave
No disclaimer. Nothing to sell. I need to fix that.
New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

Re: How to recovery nanoloco m5 with disable reset?

Hi! first, thx to answer!
do you have some jtag tutorial for made the special cable and howto reset it?
thx in advance,
Euphoria
Edit:
im find the pin: wiki.openwrt.org/toh/ubiquiti/nanostation
but need the jtag information and the procedure.
continue to search
Emerging Member
therealstu
Posts: 52
Registered: ‎06-08-2011
Posts: 52
Kudos: 4
Registered: 06-08-2011

Re: How to recovery nanoloco m5 with disable reset?

use a carrier POE with the reset button built in to the POE.. connect it up, hold the reset button for 30 sec.... radio should be reset to ubnt default
Ubiquiti Employee
UBNT-Edmundas
Posts: 3,727
Registered: ‎05-13-2009
Posts: 3727
Kudos: 491
Solutions: 36
Registered: 05-13-2009

Re: How to recovery nanoloco m5 with disable reset?

Guys,

if reset button is disabled from AirOS, it will not work nor pressing button on devices itself, not on PoE adapter. But you can still reset device to factory defaults via TFTP recovery procedure. You need to hold on reset button longer than 15sec when powering device and upload new firmware image. After reboot device will boot up with default settings.

-Edmundas
New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

Re: How to recovery nanoloco m5 with disable reset?

Hi again ant thx for your time :manwink:

Im do the firmware update from tftp like: www.ubnt.com/wiki/Firmware_Recovery

Im see the new version in ubnt discovery but this not erase the config and im have the same problem but with the 5.3.3 version :manhappy:

im thing the only option is the jtag, any tutorial for made the hardware and tutorial for reset setting?

any other idea?

P.D.: im try to flashother firmware (dd-wrt) and go back to airos but this not erase the config. Is posible from dd-wrt to erase the config from airos?

Thx again!
New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

Re: How to recovery nanoloco m5 with disable reset?

Hi again and thx for the answer!

im try it using this tutorial: www.ubnt.com/wiki/Firmware_Recovery but now im have a airos 5.3.3 version with same problem.

im try to flash dd-wrt and go back to airos but this not erase the airos setting.

Is posible to reset the airos config frans dd-wrt from telnet or similar?

if not im thing the only way is jtag. any tutorial for hardware and software reset?

thx again in advance.
Euphoria
New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

Re: How to recovery nanoloco m5 with disable reset?

Hi, thx for reply,
I'm try it but but only upgrade the radio whitout reset nothing.
maybe is possible to do it from other firmware? I'm try to put dd-wrt and go back to airos , not working but maybe some command from dd-wrt for reset the nand?
Thx in advance.
SuperUser
Dave-D
Posts: 25,529
Registered: ‎06-23-2009
Posts: 25529
Kudos: 3761
Solutions: 423
Registered: 06-23-2009

Re: How to recovery nanoloco m5 with disable reset?

This forum has no support for foreign
firmware. If you have somehow installed
that, I suggest you check with the
Website for that product. Dave
No disclaimer. Nothing to sell. I need to fix that.
Ubiquiti Employee
UBNT-Edmundas
Posts: 3,727
Registered: ‎05-13-2009
Posts: 3727
Kudos: 491
Solutions: 36
Registered: 05-13-2009

Re: How to recovery nanoloco m5 with disable reset?

Hi again ant thx for your time :manwink:

Im do the firmware update from tftp like: www.ubnt.com/wiki/Firmware_Recovery

Im see the new version in ubnt discovery but this not erase the config and im have the same problem but with the 5.3.3 version :manhappy:

im thing the only option is the jtag, any tutorial for made the hardware and tutorial for reset setting?

any other idea?

P.D.: im try to flashother firmware (dd-wrt) and go back to airos but this not erase the config. Is posible from dd-wrt to erase the config from airos?

Thx again!


If configuration wasn't erased, it means that you hold reset button not long enough and it simple did firmware recovery without configuration partition changes.

-Edmundas
New Member
Euphoria
Posts: 33
Registered: ‎08-29-2009
Posts: 33
Solutions: 3
Registered: 08-29-2009

Re: How to recovery nanoloco m5 with disable reset?

If configuration wasn't erased, it means that you hold reset button not long enough and it simple did firmware recovery without configuration partition changes.
-Edmundas

THX!!!
im got the radio reseted finally! is true, when im tftp flash the airos im only press 8 sec. and only flash the firmware but without reset the config. im try to do the same with 20 sec. and is work great!
Thx to all people to help me.
Euphoria.
P.D.: im cannot change the post title to ?