Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

firmware upgrade

Hi,

I use an ubiquiti Nanostation Loco M2 with "XS2.ar2316.v3.5.4494.091109.1451" firmware.

It work perfectly but I would upgrade it with new fimware
(XM-v5.5.build12536.bin)

to do it I use the web gui but it doesnt work (when a click on upgrade a obtain an empty page)

I have reset the NSL2 with IP 192.168.1.20 and I can ping it and acces on web gui but not upgrade.

in a second time a have try to send this firmware via TFTP but it's the seem.

Can you help me in this operation ?
thanks
Veteran Member
Bean_Planter
Posts: 5,233
Registered: ‎08-09-2011
Posts: 5233
Kudos: 2078
Solutions: 145
Contributions: 10
Registered: 08-09-2011

Re: firmware upgrade

See "Factory Firmware Recovery" section in this link:
wiki.ubnt.com/AirMax_Products
Cheers,
Gene
NEW FORUM MEMBERS:
Setup Help: Select the [Knowledge Base] link above. Search on "setup" or "configure".
Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

Re: firmware upgrade

vous etes vraiment rapide à répondre (un peu comme vos produits ;-)
Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

Re: firmware upgrade

ok i have try it with tftp2 and it doesnt work :-(
"unable to get responses from server"
Veteran Member
Bean_Planter
Posts: 5,233
Registered: ‎08-09-2011
Posts: 5233
Kudos: 2078
Solutions: 145
Contributions: 10
Registered: 08-09-2011

Re: firmware upgrade

Well, it is Sunday where I am. My "products" (beans) are planted and growing on their own now.
My rock picker still needs a little work but I thought I would check the forum before going out and firing up the welder.
Best wishes on your project.
Cheers,
Gene
NEW FORUM MEMBERS:
Setup Help: Select the [Knowledge Base] link above. Search on "setup" or "configure".
Veteran Member
Bean_Planter
Posts: 5,233
Registered: ‎08-09-2011
Posts: 5233
Kudos: 2078
Solutions: 145
Contributions: 10
Registered: 08-09-2011

Re: firmware upgrade

ok i have try it with tftp2 and it doesnt work :-(
"unable to get responses from server"


Your laptop must be on 192.168.1.x subnet in order to see the UBNT radio (which is configured for 192.168.1.20).

Here is a YouTube video to show you how.

www.youtube.com/watch?v=0qTijaULpiI

I hope this is helpful.

Cheers,
Gene
NEW FORUM MEMBERS:
Setup Help: Select the [Knowledge Base] link above. Search on "setup" or "configure".
Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

Re: firmware upgrade

ok i'm sorry to disturb you
I'm in france and it is monday (00h36)
no urgency

(192.168.1.254/24)
Veteran Member
Josh_SPITwSPOTS
Posts: 16,781
Registered: ‎11-20-2011
Posts: 16781
Kudos: 4797
Solutions: 111
Registered: 11-20-2011

Re: firmware upgrade

Wait, are you SURE it's an M2 and not a loco2?

You said firmware 3.5, which to my knowledge is only for legacy products, not the "M" series.

If so, 4.0.1 would be the newest firmware for you.
Josh Reynolds :: Chief Information Officer :: www.spitwspots.com
Ubiquiti Carrier Wireless Admin, Trainer
Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

Re: firmware upgrade

loco2
Newbie
charly_md
Posts: 6
Registered: ‎05-20-2012
Posts: 6
Kudos: 1
Registered: 05-20-2012

Re: firmware upgrade

Ok I'm a dumb !
it's work with the right firmware
NanoStation2Loco-v4.0.1.build4978.bin