05-16-2018 11:14 AM
Having a issue on the fail over on ER-PRO 8 with 1.10.3.
When cable to the cable modem is not getting signal, but the ER-PRO8 is connected to the cable modem and the link lights are on it will not allow the fail over to pickup. Then I took this a step futher and was able to notice that if I unplugged the connection from the cable modem it worked on failover, but if I plug in to a switch not on the same network it will act the same way as it does with the cable modem plugged and no signal to the cable modem.
Some else run acrossed this before?