Reply
New Member
Posts: 3
Registered: ‎05-16-2018

ER lite IPSec tunnel between 1 hub and 2 spokes

Hi,

 

Have 3 locations with ER lite at each.

hub setup:

basic wizard

eth0 wan

eth1 192.168.1.1/24

eth2 10.0.0.1/24

 

spoke1:

basic wizard
eth0 wan
eth1 192.168.0.1/24
eth2 10.0.0.1/24

 

Spoke 2:

basic wizard
eth0 wan
eth1 192.168.2.1/24
eth2 10.0.0.1/24

 

i need bi directional communication between hub and each spoke to reach eth1 at hub from eth1 at each spoke.

 

we configured IPSec tunnel on hub for both spikes and on each spoke for the hub.

 

the problem is that it appears only one VPN tunnel would come up at a time. We can’t seem to get both to be up together.

 

eth2 at each site is used for guest wifi with a firewall till to drop.

 

any help would be appreciated.

 

im not comfortable with cli, hence if possible I’d prefer a GUI step by step option.

 

New Member
Posts: 3
Registered: ‎05-16-2018

Re: ER lite IPSec tunnel between 1 hub and 2 spokes

So after various troubleshooting attempts we got both tunnels to be up.

 

The tunnel we had an issue with we changed the ddns to an IP and it came up.

 

why would that be even though it was previously up using the ddns name?

 

the second tunnel using ddns name for the spoke as well and works fine.

 

 

Reply