New Member
Posts: 8
Registered: ‎01-13-2017

How to access modem configuration over ETH0

Hello,

 

I have just setup EdgeRouter X and i setup :

 

2 Internet Access on ETH0 and ETH1

Network over ETH2 192.168.1.1

 

I can access modem configuration over ETH1 192.168.5.1

But not on ETH0 192.168.20.1

 

Can you help me please ?

 

Thank, Guillaume.

Established Member
Posts: 1,595
Registered: ‎07-07-2014
Kudos: 374
Solutions: 105

Re: How to access modem configuration over ETH0

Hi @coprosecurit,

 

What is the IP address of the modem on eth1?

What is the IP address of the modem on eth0?

 

Is eth1 your primary WAN connection?

Highlighted
New Member
Posts: 8
Registered: ‎01-13-2017

Re: How to access modem configuration over ETH0

Hi !

 

Ip of ETH0 is 192.168.20.13 (Modem is 192.168.20.1)

Ip of ETH1 is 192.168.5.20 (Modem is 192.168.5.1)

 

I can access 192.168.5.1 ETH1 but not 192.168.20.1

 

Primaty Wan is ETH0 > ETH1 is failover only

 

Thank.

Established Member
Posts: 1,595
Registered: ‎07-07-2014
Kudos: 374
Solutions: 105

Re: How to access modem configuration over ETH0

Hmm, can you post your config?  I'm not sure what it might be.  Is your Edgerouter NATting or letting the modems do that (because your ER is on the same internal subnet as the modems?)

New Member
Posts: 8
Registered: ‎01-13-2017

Re: How to access modem configuration over ETH0

hum for information,

 

my primary connexion on ETH0 is working now, so ETH1 is now in standby.

 

i can now access modem configuration on ETH0 but now not ETH1

Member
Posts: 149
Registered: ‎01-23-2017
Kudos: 28
Solutions: 6

Re: How to access modem configuration over ETH0

If eth0 and eth1 are WAN then you cannot access the config through those ports.

Its a safety feature so people on the WAN side of your router don't access your config.