New Member
Posts: 25
Registered: ‎01-19-2013
Kudos: 3
Solutions: 1
Accepted Solution

edge router lite tough switch and nanostation m2 vlan problems

hi people

 

im new to ubnt

but i like networking

 

i have a problem with vlan

i set up a vlan (id 30) on eth2 of the edge router with dhcp and conect it to port 1 of switch

then i put in port8 the nanostation m2

create another vlan id 30 and tag port 1 and 8  on the switch

then on nanostation create another vlan and somewhere then i got lost.............

 

what i want to do is to create all my vlans on the router trunk them all to the switch and on there conect the nanos as access points.

 

please help...........


Accepted Solutions
Highlighted
Ubiquiti Employee
Posts: 12,080
Registered: ‎11-27-2012
Kudos: 3863
Solutions: 793
Contributions: 73

Re: edge router lite tough switch and nanostation m2 vlan problems

This sounds more like an airMAX related issue (provided everything is set-up correctly on your ERL).  Please see this KB article. (3rd link)

 

http://community.ubnt.com/t5/airMAX-FAQ/airMAX-and-VLANs/ta-p/455741

 

UBNT_Alternate_Logo.png
Ubiquiti Networks airMAX Support Team

Check out our ever-evolving Help Center for answers to many common questions!

FREE UBWA Student Guide-Great RF Primer!

View solution in original post


All Replies
Highlighted
Ubiquiti Employee
Posts: 12,080
Registered: ‎11-27-2012
Kudos: 3863
Solutions: 793
Contributions: 73

Re: edge router lite tough switch and nanostation m2 vlan problems

This sounds more like an airMAX related issue (provided everything is set-up correctly on your ERL).  Please see this KB article. (3rd link)

 

http://community.ubnt.com/t5/airMAX-FAQ/airMAX-and-VLANs/ta-p/455741

 

UBNT_Alternate_Logo.png
Ubiquiti Networks airMAX Support Team

Check out our ever-evolving Help Center for answers to many common questions!

FREE UBWA Student Guide-Great RF Primer!

New Member
Posts: 25
Registered: ‎01-19-2013
Kudos: 3
Solutions: 1

Re: edge router lite tough switch and nanostation m2 vlan problems

Thanks it's ready.