a week ago - last edited a week ago
I am trying to make the edgeswitch 5xp ports 100Mbps and keep Autonegotiation on.
it is easy on the 24 ES Lite Through cli.
Can someone/anyone help me out with this please...
On the ES-XP switches, you can either rely on auto-negotiation (1000/100/10) or manually set the port speeds to 100/10 (half/full).
One 'hack' is to try to negotiate down to 100/full using a cat5 (not cat5e) cable.
Ben Pin | Ubiquiti Support
Looking for an alternative to:
Task: Change the speed and duplex settings
Setup eth0 negotiated speed with mii-tool
Disable autonegotiation, and force the MII to either 100baseTx-FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD:
# mii-tool -F 100baseTx-HD
# mii-tool -F 10baseT-HD
Setup eth0 negotiated speed with ethtool
# ethtool -s eth0 speed 100 duplex full
# ethtool -s eth0 speed 10 duplex half
To make these settings permanent you need to create a shell script and call from /etc/rc.local (Red Hat) or if you are using Debian create a script into the directory /etc/init.d/ directory and run update-rc.d command to update the script.
there has to be a way with cli on this