I was curious if it is possible to swap out sunMAX inverters with Enphase IQ6 ones in an existing install. The DC cables from the panels will connecting right up I'm sure. My concern is with how to connect the existing Y landscape AC cables to the IQ6 inverters. Do they make an adapter that will go from the small 4-pin connector on the Y landscape cable to the connector used on the IQ6?
I have a 56 panel roof installation, and I'm getting tired of going up there every few weeks to replace a failed inverter and I'm thinking that I'd rather just swap them all out with IQ6 ones and be done with it. But I was hoping to be able to keep the rest of the infrastructure in place. (Y cables, jumper cables and end run connectors).