Upcoming Maintenance Alert:

The UBNT Community will be upgraded at 5pm MDT on April 25th. During this time the community forums will be set to read-only status.

Learn more

×
Reply
Highlighted
Ubiquiti Employee
Posts: 60
Registered: ‎11-08-2015
Kudos: 26
Solutions: 2

Indications for completing your first solar sunmax system

[ Edited ]

There are many useful information in the forum and documents on the website. But it seems not easy for a new one coming into sunmax to know how to go through the permit and complete a sunmax installation.  Besides, there are some fw change of sunmax's Gateway and the official installation guide has not finished yet. So, I try to make an indication as below, hope it would with some help.

Please refer to the link:

https://www.dropbox.com/s/0sc0secpd3pma7z/Sunmax%20products%20introduction.pdf?dl=0

 

New Member
Posts: 3
Registered: ‎08-03-2016

Sun MAx

Could you please tell me where I went wrong on the test questions??

I have 100% on the entire coruse, except:

 

New Member
Posts: 3
Registered: ‎08-03-2016

Re: Indications for completing your first solar sunmax system

Thank you for your prompt responce, the answers I submitted do not appear to be incorrect, but the website is still not passing the answers submitted as "correct"??

Ubiquiti Employee
Posts: 60
Registered: ‎11-08-2015
Kudos: 26
Solutions: 2

Re: Indications for completing your first solar sunmax system

@UBNT-Hyde

 

I hear that you are dealing with some of the same requirement about training material on the cloud. Could you also help with this?

 

 

 

Ubiquiti Employee
Posts: 13
Registered: ‎01-25-2017

Re: Indications for completing your first solar sunmax system

@systemaxnw5

 

Yes, I did the same test and also can't get the "Correct" result.

I will contact related colleague to get problem fixed.

New Member
Posts: 5
Registered: a month ago

Re: Indications for completing your first solar sunmax system

 
New Member
Posts: 5
Registered: a month ago

Re: Indications for completing your first solar sunmax system

My solarmax install tool for android does not recognize qr code of the panel? I've printed more expanded but same...
Ubiquiti Employee
Posts: 60
Registered: ‎11-08-2015
Kudos: 26
Solutions: 2

Re: Indications for completing your first solar sunmax system

[ Edited ]

ikoen@abv.bg

 

Could you post one of your QR code here, and let me try it?

New Member
Posts: 5
Registered: a month ago

Re: Indications for completing your first solar sunmax system

 
image-0-02-05-e92dd007911784f041011bbce57aecfbfcd6d73a22b233135202aa9a63a5629e-V.jpg
New Member
Posts: 5
Registered: a month ago

Re: Indications for completing your first solar sunmax system

I am far away from my system now. Not shure that this is the qr code of the panel. It might be from the gateway. There is the second problem. My android solarmax instaĺl answer me that the qr code of the gateway already is attached to other site. My system is brand new. How is it possible?

Ubiquiti Employee
Posts: 60
Registered: ‎11-08-2015
Kudos: 26
Solutions: 2

Re: Indications for completing your first solar sunmax system

[ Edited ]

You should be able to get QRcode in MI's box as below picture.

Please use your sunmax's android app to scan the QRcode of inverters. The concept is that you could read inverter's generation data to know the panel's status, not to scan the panel's QRcode. And, please also do the QRcode map for your future application. 

 

 

For the gateway QRcode, please also post it here, and I could check it in the system and correct the error in the system for you.

 

DSC_0056.JPG
DSC_0057 - 複製.JPG
Screenshot_2017-08-17-17-04-19.jpg
未命名.png
New Member
Posts: 5
Registered: a month ago

Re: Indications for completing your first solar sunmax system

Ok, I will be able to do that after 3 days. Hope that the Ml's qrcode isn't lost by unpack. Thank you Very much
Reply