New Member
Posts: 4
Registered: ‎01-16-2019

EdgeSwitch running high on CPU after UNMS upgraded to 0.13.3

Hi guys,

 

I recently upgrade my UNMS from 0.12.3 to 0.13.3 (the latest stable version at the time). Since then all of my EdgeSwitches (around 15) are running really high on CPU.

 

Before upgrade the CPU was in range of 30-40% depending on traffic on the switch. But after UNMS upgrade all the switches are in range of 70-80%. Not sure how this all is related but it definitely happened after UNMS upgrade.

 

Also, FYI all switches were upgraded before and are running 1.8.1 version.

 

Does anybody else have this issue? Any recommendations to investigate in detail? Any other suggestions?

 

Attached are some screenshots for CPU & RAM for 2 switches.

 

Thanks,

 

Screen Shot 2019-03-13 at 10.18.45 AM.png
Screen Shot 2019-03-13 at 10.19.03 AM.png
Ubiquiti Employee
Posts: 3,280
Registered: ‎09-08-2017
Kudos: 1244
Solutions: 245

Re: EdgeSwitch running high on CPU after UNMS upgraded to 0.13.3

@Batman-admin  The answer is in the EdgeSwitch forum.

UBNT_Alternate_Logo.png
UNMS Support - If you want to report an issue please use this guide.

Check out our ever-evolving Help Center for answers to many common questions!