Reply
Highlighted
New Member
Posts: 42
Registered: ‎11-05-2016
Kudos: 6

unms cannot discover airmax on router mode

Hi,

 

I noticed UNMS cannot discover an airmax on Router mode. Im using Nanobeam AC in router mode with the management on another vlan.

 

When I try to discover the radio using its management IP, nothing is discovered. Then I manually connect the radio to UNMS by entering the url of UNMS. It connects, however, it is the Wan IP that is registered in UNMS not the management IP.

Ubiquiti Employee
Posts: 2,320
Registered: ‎09-08-2017
Kudos: 962
Solutions: 162

Re: unms cannot discover airmax on router mode

@u3b  Hello Jerry. It seems that there is some routing problem between your UNMS server and the device interface with the management VLAN. You can check this by running ping command on the server with the VLAN interface address. Here is an article about the discovery and what needs to be done when it is failing to find a device. 

UBNT_Alternate_Logo.png
UNMS Support - If you want to report an issue please use this guide.

Check out our ever-evolving Help Center for answers to many common questions!

New Member
Posts: 42
Registered: ‎11-05-2016
Kudos: 6

Re: unms cannot discover airmax on router mode

Hi Radek,

 

I have no problem disovering CPEs in bridge mode which are using the same management vlan as the routed mode CPEs. 

New Member
Posts: 42
Registered: ‎11-05-2016
Kudos: 6

Re: unms cannot discover airmax on router mode

Hi Radek,

 

I have fixed the issue. While the CPE is in Router mode, I just use the WLAN0.20 as management interface instead of the bridge that has WLAN0.20 and LAN0.20.

 

 

 

 

Reply