Add log file for ppp_pppoe.log date and time or show in WebIF

Submitted by -
Status: New Idea

ppp_pppoe.log Logfile is without date and time please to correct this is displayed.
Display of last connection day \ hours \ minutes as well as connected since day \ hours \ minutes

 

Is there any possibility to see this in WebIF?

 

Modem hangup
Script /etc/ppp/ip-down finished (pid 29675), status = 0x0
Connected to 84:b5:9c:xx:xx:xx via interface eth0.7
using channel 7
Using interface ppp0
Connect: ppp0 <--> eth0.7
sent [LCP ConfReq id=0x7 <mru 1492> <magic 0xd07199e4>]
rcvd [LCP ConfReq id=0x19 <mru 1492> <auth pap> <magic 0x4f5629e6>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x19 <mru 1492> <auth pap> <magic 0x4f5629e6>]
rcvd [LCP ConfAck id=0x7 <mru 1492> <magic 0xd07199e4>]
IPCP: Up event in state 2!
sent [PAP AuthReq id=0x3 user="xxxxxxxxxxxxxxxxxxxxxxxxxxx@t-online.de" password=<hidden>]
rcvd [PAP AuthAck id=0x3 "SRU=34522#SRD=84320#"]
Remote message: SRU=34522#SRD=84320#
PAP authentication succeeded
peer from calling number 84:B5:9C:xx:xx:xx authorized
sent [IPCP ConfReq id=0x5 <addr 0.0.0.0>]
rcvd [IPCP ConfReq id=0x5e <addr xxx.xxx.xxx.xxx>]
ipcp: returning Configure-ACK
sent [IPCP ConfAck id=0x5e <addr xxx.xxx.xxx.xxx>]
rcvd [IPCP ConfNak id=0x5 <addr xxx.xxx.xxx.xxx>]
sent [IPCP ConfReq id=0x6 <addr xxx.xxx.xxx.xxx>]
rcvd [IPCP ConfAck id=0x6 <addr xxx.xxx.xxx.xxx>]
ipcp: up
Script /etc/ppp/ip-pre-up started (pid 30930)
Script /etc/ppp/ip-pre-up finished (pid 30930), status = 0x0
local  IP address xxx.xxx.xxx.xxx
remote IP address xxx.xxx.xxx.xxx
Script /etc/ppp/ip-up started (pid 30991)

Here in Germany, the Provieder wants to have trouble with date and time when the problem was.

So you can understand nothing

 

Big Thanks

Comments
by
on ‎03-15-2019 11:15 AM

Yeah would be great for PPOE troubleshooting.

by
on ‎03-16-2019 08:45 PM

+1