Reply
Ubiquiti Employee
Posts: 9,081
Registered: ‎01-28-2013
Kudos: 15483
Solutions: 600
Contributions: 20

[FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable

[ Edited ]

Please see our release post HERE.

Emerging Member
Posts: 52
Registered: ‎10-05-2016
Kudos: 13

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

[ Edited ]

Mike,

I just upgraded to this firmware and now it wants me do downgrade again. This is only for my 16xg. Should I just stay put with the latest firmware on this switch or downgrade?

 

I am running latest supported versions of all firmware on all devices.

Thanks!

Emerging Member
Posts: 44
Registered: ‎12-12-2013
Kudos: 3
Solutions: 2

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

If this is Stable Candidate why is it showing up in my Cloud Key Gen2?

Emerging Member
Posts: 52
Registered: ‎10-05-2016
Kudos: 13

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

I saw this also, but I was setting up a new network.  I pulled a cloudkey from my drawer that i ordered not to long ago.  I "suspect" that this gen 2 is a second generation cloudkey.  I have a unifi network at home and a unifi wireless network i deployed at work.  These two cloudkeys seem noticably slower than this gen 2 cloudkey on my main network.

 

home network is just a 3p gateway, 8 port 60w switch and a single ap pro.

 

Wireless at work is a 4pro gateway, 16 port poe switch and 5 ap ac pro's

 

new network at work is a 16 port poe switch, (4) 48 port switches, and a 16XG 10 GB switch

 

the latter gui feels faster but then again maybe it is because of the equipment I am using?  interconnected via sfp+ 16xg backbone?

Established Member
Posts: 1,870
Registered: ‎03-31-2017
Kudos: 658
Solutions: 204

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate


@jsnmllr1981 wrote:

If this is Stable Candidate why is it showing up in my Cloud Key Gen2?


What you are running the controller on does not matter.

 

What matters is the version of the controller (and type of device), and whether or not UBNT "pushed" the firmware to that controller version for that device.

 

I'm running controller 5.9.32 and the current firmware being offered for my APs (nanoHD, IW-HD, UAP-AC-M) is 4.0.9.9636. The controller only checks once every 24 hours UBNT may have pushed the wrong one initially and then corrected it. If you go to "Maintenance" on the controller you can manually force a refresh then wait ~5 minutes and see if it changes to 4.0.9.

 

New Member
Posts: 11
Registered: ‎07-04-2018
Kudos: 7

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Still not fixed ....reversed up and download stats...

 

Capture.PNG

Member
Posts: 241
Registered: ‎03-29-2017
Kudos: 50
Solutions: 3

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate


@pdeswardt wrote:

Still not fixed ....reversed up and download stats...

 

Capture.PNG


That would be a Controller bug not a UAP or USW firmware bug.

UniFi:
Controller (Ubuntu 16.04.4 VM): 5.10.19 | USG4P: 4.4.37dev | 1 x US-24-250w | 1 x US-8-150w | 1 x US-8-60w: 4.0.24 | 4x UAP-AC-Pro-US: 4.0.24
New Member
Posts: 1
Registered: ‎10-24-2018

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Where did you get 5.9.32 from?

Emerging Member
Posts: 44
Registered: ‎12-12-2013
Kudos: 3
Solutions: 2

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Right, but why are they pushing a Stable Candidate into production systems and not waiting for Stable and follow there deployment policies

Established Member
Posts: 1,870
Registered: ‎03-31-2017
Kudos: 658
Solutions: 204

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

New Member
Posts: 2
Registered: ‎08-25-2018
Kudos: 1

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Fan control on my us-24 switch with v.4.0.10.9653 will not work... restore it back ... 🙄🙈

Emerging Member
Posts: 76
Registered: ‎06-21-2016
Kudos: 21
Solutions: 1

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate


@jsnmllr1981 wrote:

Right, but why are they pushing a Stable Candidate into production systems and not waiting for Stable and follow there deployment policies


Is your controller version x.32? If so then its because you're running the stable candidate controller so you'll get stable candidate firmware.

 

I'm on 32 at home and got the upgrade and now the downgrade, too. No issues with the latest update so not sure what the downgrade is for. 

Member
Posts: 228
Registered: ‎05-14-2018
Kudos: 19
Solutions: 2

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

@UBNT-MikeD

 

is the swctrl cmd still disabled in this version?

 

regards

Emerging Member
Posts: 73
Registered: ‎06-29-2017
Kudos: 10

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Emerging Member
Posts: 56
Registered: ‎01-13-2016
Kudos: 36
Solutions: 1

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

Same problem as with 4.0.9.

As soon as I install 4.0.9 or 4.0.10 my IPTV from T-Mobile Fiber Netherlands stops working.

Also most of my Google Home Mini's stop working.

 

Restored back to the 3.*.* version and all is ok again.

Ubiquiti Employee
Posts: 9,081
Registered: ‎01-28-2013
Kudos: 15483
Solutions: 600
Contributions: 20

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable

This release has been moved to stable status. It has been pushed out to 5.9, 5.8.30, 5.7.28, 5.6.40, and the mobile app. It'll be pushed out to some older versions shortly. The download site will be updated later today.

 

Cheers,

Mike

Emerging Member
Posts: 52
Registered: ‎10-05-2016
Kudos: 13

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable

Thank you.

 

All is good for all 3 of my sites.

Emerging Member
Posts: 52
Registered: ‎10-05-2016
Kudos: 13

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable Candidate

New Member
Posts: 13
Registered: ‎12-19-2017
Kudos: 4

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable

My us-8-60w upgraded this firmware, and then IPTV does not work. so I downgrade to 3.9.54.9373, the IPTV works again. My IPTV receives stream via igmpproxy. It must have some bugs or changes related mulicasting.

Please fix it, thank you!

New Member
Posts: 11
Registered: ‎12-09-2016
Kudos: 1

Re: [FIRMWARE] 4.0.10.9653 for UAP/USW has been released | Stable

I updated from 3.9.54.9373 --> 4.0.10.9653

 

uap-ac-shd <-- No issues so far
uap-ac-pro <-- No issues so far
us-8-150w <-- No issues so far
us-8-60w <-- No issues so far

 

uap-ac-hd <-- did not come back up on wireless uplink.  I had to run a cat 5 to it and get it up on wired uplink.  I then was able to unplug the cat 5 and it came up on wireless uplink.  no other issues so far.

Reply