Reply
Highlighted
New Member
Posts: 1
Registered: ‎09-01-2018

Firewall Rules Help Please

[ Edited ]

Hi

 

I need some help please, 

 

I have the following networks

 

1. Main Network - 192.168.1.0/24 - This gives IP's to all my Unifi devices as well company PC's etc

2. VOIP Phones - 192.168.30.0/24 - This gives correct IP's to all my VOIP phones and I have specified VLAN 30 here

3. Camera DVR - 192.168.40.0/24 - I have only the DVR conencted as 192.168.40.10 and have specified VLAN 40 here

 

What I want to do is block everybody from each other, only whtin the same network can access necessary PC's etc.

This works if I use Option2 "Block all vLans to one another" https://help.ubnt.com/hc/en-us/articles/115010254227

 

But now I have a PC with IP 192.168.30.200, it has a network cable going from the PC to the VOIP phone 192.168.30.100 becase the phone does allow network etc. to passthrough, so its like a switch, from the PC I want to access 192.168.40.10 as well any necessary PC's etc on 192.168.1.0/24 network

 

By playing around qith different firewall rules on the LAN_IN I have managed to get 192.168.30.200 to connect to 192.168.40.10 and nobody else can access the VOIP network, however I just cannot seem to get 192.168.30.200 to access the main network specifically 192.168.1.51

 

I have since removed all firweall rules so we can continue to work for now, currently anybody can access anybody across networks.

 

Could somebody assist me here please.

 

 I have a

USG Router - 192.168.1.1 with Firmware 4.4.36.5146617

Unifi Switch 8 POE-150W with Firmware 4.0.14.9736

Unifi Switch 24 with Firmware 4.0.14.9736

 

Reply