01-20-2018 01:05 PM - edited 01-20-2018 01:06 PM
I have a USG 3P that has the 'LAN2' port labelled as WAN 2 / LAN 2. (Nothing is labelled VOIP as pictured below).
I would like to free up a port by moving something to LAN 2.
I have a 8POE-150W on LAN1. I also have a 8POE-60W connected to the 8POE-150W as well as a Key.
I also have the option of moving one computer to LAN2 (if firewalls/routing is too difficult!)
I currently have:
LAN |----- LAN1 (corporate) 192.168.1.1/24 |----- VLAN10 10.10.10.1/24
And am attempting to add:
LAN2 |----- LAN2 (corporate) 192.168.2.1/24
At the moment is that I can't get anything running on the LAN 2 port on the USG to even explore options.
My controller version is 5.6.29 (Build: atag_5.6.29_10253) and every Unifi device is at current versions (updated through the controller).
I have tried with and without the "Configure VOIP port as WAN2 on UniFi Security Gateway 3P" option and haven't had any luck.
Any help would be greatly appreciated!
05-26-2018 12:21 AM
Finally got back to trying this out. Looks like I had left rubbish in trying to get it working. Cleared out everything and started from the start, waited 30 seconds after applying for it to reset and good to go.
07-27-2018 01:42 PM - edited 07-27-2018 01:44 PM
You need to create it as a network: Settings, Networks, Create New Network, Purpose: WAN, WAN2