New Member
Posts: 10
Registered: ‎07-07-2016
Kudos: 2
Solutions: 2
Accepted Solution

Open DNS with USG

Is there an easy out of the box way to configure USG to work with Open DNS?  I moved to my USG from Meraki; with my Meraki MX64 the setup was pretty simple. Is there a simple way to configure on the USG?


Accepted Solutions
Member
Posts: 229
Registered: ‎10-20-2016
Kudos: 28
Solutions: 2

Re: Open DNS with USG

[ Edited ]

Hello @dessmith,

 

Go to Settings - Services - Dynamic DNS + Create New Dynamic DNS and choose dyndns for your service.

 

Select Interface (WAN 1 or WAN 2), Service = dyndns, enter Hostname, Username, Password, Server, and click Save.

 

The link below will also help.

 

https://community.ubnt.com/t5/UniFi-Routing-Switching/Opendns-Dynamic-DNS-on-USG-not-working/m-p/189...

View solution in original post


All Replies
Member
Posts: 229
Registered: ‎10-20-2016
Kudos: 28
Solutions: 2

Re: Open DNS with USG

[ Edited ]

Hello @dessmith,

 

Go to Settings - Services - Dynamic DNS + Create New Dynamic DNS and choose dyndns for your service.

 

Select Interface (WAN 1 or WAN 2), Service = dyndns, enter Hostname, Username, Password, Server, and click Save.

 

The link below will also help.

 

https://community.ubnt.com/t5/UniFi-Routing-Switching/Opendns-Dynamic-DNS-on-USG-not-working/m-p/189...

Highlighted
New Member
Posts: 10
Registered: ‎07-07-2016
Kudos: 2
Solutions: 2

Re: Open DNS with USG

Thanks for the answer Cooter, that solution worked and all works just as expected.  Bravo!!