Reply
Ubiquiti Employee
Posts: 9,070
Registered: ‎01-28-2013
Kudos: 15441
Solutions: 600
Contributions: 20

UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

[ Edited ]

Please see our release post HERE.

New Member
Posts: 15
Registered: ‎12-04-2017
Kudos: 2
Solutions: 1

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable Candidate

[ Edited ]

getting this error when attempting to upgrade:

 

ERROR: Bad FW Image Signature
ERROR: Invalid firmware file '/var/tmp/fwupdate.d7NUkczEOu'!
ERROR: Invalid firmware file /var/tmp/fwupdate.d7NUkczEOu!

 

I'm on 0.8.10 - does this require 0.8.12 prior to upgrading?

 

EDIT:

 

I've attempted both options for manual update via the web interface and via ssh - error details above are from the ssh.

Regular Member
Posts: 586
Registered: ‎05-19-2014
Kudos: 107
Solutions: 25

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable Candidate


@jsgiv wrote:

getting this error when attempting to upgrade:

 

ERROR: Bad FW Image Signature
ERROR: Invalid firmware file '/var/tmp/fwupdate.d7NUkczEOu'!
ERROR: Invalid firmware file /var/tmp/fwupdate.d7NUkczEOu!

 

I'm on 0.8.10 - does this require 0.8.12 prior to upgrading?

 

EDIT:

 

I've attempted both options for manual update via the web interface and via ssh - error details above are from the ssh.


Did you by any change mix up the firmware files for CKG2/CKG2+ ?

There are 2 different links; one for the non-plus and one for the plus.

New Member
Posts: 15
Registered: ‎12-04-2017
Kudos: 2
Solutions: 1

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable Candidate

Yep that was it - was accidentally pulling the wrong version from the page (I have the G2+). 

 

Thanks!

Member
Posts: 202
Registered: ‎01-08-2015
Kudos: 28
Solutions: 5

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable Candidate

I would expect the device to stop the upgrade if wrong firmware is used?  That should be a basic fucntion so you don;t brick your device :-)

Regular Member
Posts: 645
Registered: ‎12-24-2013
Kudos: 221
Solutions: 2

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

Seeing Protect is not at 1.6.0...What will this to do us that already updated to Protect 1.6.0 seeing this version reads it has 1.5.0 bundled in it?  Would have expected 1.6 seeing, I do thingk, it came out before this relese.

 

I ask for in Protect, it does not supprt going BACK DOWN in releases. (Major Issuel) 

 

Thanks

UniFi Protect - Need to be able to TURN OFF IR LED's, but not the processing needed to use IR.

"IR LED FEATURE REQUEST" POSTED....

https://community.ubnt.com/t5/UniFi-Protect-Feature-Requests/TURN-OFF-IR-LEDS-for-use-Behind-Windows/idi-p/2636108

Please be so kind and KUDO the feature request.
New Member
Posts: 2
Registered: ‎01-07-2019
Kudos: 1

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

[ Edited ]

After updating the Cloud Key Gen2, from 0.8.10, I see that the controller is unable to create a key store.

 

This has persisted even after I reset the cloud key (after update) and reloaded from backup, and rebooted it as well.

 

A couple of weeks ago I tried to get to install a SSL cert (following a guide on youtube), gave up, and then did at that time a reset. I did not remember seeing this warning then, but that version of the controller displayed logs with a white font on a white background. Possibly this is the cause for the error?

 

[16:42:08,657] <check-iot-certificate> WARN sdn - Failed to create key store
java.lang.NullPointerException: null
at com.ubnt.service.sdn.P.Ò00000(Unknown Source) ~[ace.jar:?]
at com.ubnt.service.sdn.P.super(Unknown Source) [ace.jar:?]
at com.ubnt.net.new.A.new.OoOO.o00000(Unknown Source) [ace.jar:?]
at com.ubnt.service.sdn.OOOo.oöO000(Unknown Source) [ace.jar:?]
at com.ubnt.service.OoOO.Objectnew$5.run(Unknown Source) [ace.jar:?]
at com.ubnt.ace.String$_OOo.run(Unknown Source) [ace.jar:?]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [?:1.8.0_181]
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:308) [?:1.8.0_181]
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:180) [?:1.8.0_181]
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:294) [?:1.8.0_181]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [?:1.8.0_181]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [?:1.8.0_181]
at java.lang.Thread.run(Thread.java:748) [?:1.8.0_181]
[16:42:08,671] <check-iot-certificate> WARN sdn - unable to generate rest client: null
[16:42:08,799] <check-iot-certificate> WARN sdn - failed to check IoT certificate: null

 

 

 

Emerging Member
Posts: 52
Registered: ‎09-25-2017
Kudos: 16

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

Same error on Debian Controller... dunno why

Ubiquiti Employee
Posts: 258
Registered: ‎11-09-2016
Kudos: 125
Solutions: 11

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

@dMopp @Nurket

This error doesn't cause any side effects but will appear in logs if cloud access is disabled. We'll have an improvement for this in a coming release.

- Austin
Want to try out new features or fixes before they're released as Stable? Sign up for Beta here: https://help.ubnt.com/hc/en-us/articles/204908664-How-To-Signup-for-Beta-Access
New Member
Posts: 14
Registered: ‎01-23-2017
Kudos: 2

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

Was there any follow up on this?  Does upgrading the firmware break Protect if its already been upgraded to 1.6.0 or 1.6.1?

 

--jason

Ubiquiti Employee
Posts: 258
Registered: ‎11-09-2016
Kudos: 125
Solutions: 11

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

@user57 @DBNet

No, as long as you are currently running a recent firmware (0.7.0+) the UCKP caches UniFi and Protect updates.

- Austin
Want to try out new features or fixes before they're released as Stable? Sign up for Beta here: https://help.ubnt.com/hc/en-us/articles/204908664-How-To-Signup-for-Beta-Access
New Member
Posts: 14
Registered: ‎01-23-2017
Kudos: 2

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

Thank you. I can confirm I updated the CKg2+ firmware and Protect did not downgrade; everything looks happy!
New Member
Posts: 2
Registered: ‎01-07-2019
Kudos: 1

Re: UniFi Cloud Key Gen2/Plus firmware 0.9.2 has been released | Stable

Thanks, good to know.

Reply