Reply
Member
Posts: 281
Registered: ‎08-06-2015
Kudos: 92
Solutions: 3

Re: UniFi SDN Controller 5.9.29 Stable has been released

@tpbrice USG 4.4.34 was released to beta channel today.

Emerging Member
Posts: 69
Registered: ‎02-01-2014
Kudos: 15

Re: UniFi SDN Controller 5.9.29 Stable has been released

@UBNT-MikeD bug report and debug details.  (and Hi @UBNT-charlie )

 

Running 3 USG Pros with auto site to site VPNs.  Been having all sorts of strange issues from getting the tunnels to come up and then routing issues once they were up.  The big issue one was manual/static routes were not being honored (it would route the packets out the WAN interface rather than across vti).  Double checked all the linux routing tables and even 'ip route get $trtget_address' reports the packets should be going over vti0.

 

The 'main' USG is using WAN1 as its uplink.  The other ends were using WAN2.  Switched the uplink IP config over to WAN1 and deleted the config for WAN2 and swapped the cables around, routing starts working like it should (pushing packets across vti0 rather than out WAN2).

 

I haven't chased it down all the way but gut says there is something the iptables prerouting that was mucking with the packets and changing the source address that messed upthe routing.  tcpdump on WAN2 showed a different source address, which makes sense because of NAT on the WAN.

 

In the bad state, prior to the cable swap when routing was doing the wrong thing,  you see something like this at the remote sites.

$ show vpn ipsec status
IPSec Process Running PID: 4016

1 Active IPsec Tunnels

IPsec Interfaces :
        eth2    ( )        eth3(1.2.3.4)

 

Established Member
Posts: 1,840
Registered: ‎10-05-2014
Kudos: 312
Solutions: 48

Re: UniFi SDN Controller 5.9.29 Stable has been released

I manage multiple site in UniFi SDN Controller 5.9.29 and now I try to find a way to create one Admin user that can manage more that one site at the time.

 

Regards,

Do not expect me to reply to this post, I'm not sure that I will be able to find it, thank's to ....

New Member
Posts: 3
Registered: ‎08-20-2018

Re: UniFi SDN Controller 5.9.29 Stable has been released


@tpbrice wrote:

So, a lot of people with a lot of problems and no news on an update to either the controller, or USG as yet?


Im honestly just waiting for a fix for the json file import so I can fix everything else myself. 

 

I had to turn off ips due to it eating 100% cpu in the week. I suspect it was a rules update that caused that and it is still tagged as beta so that's fine. 

Senior Member
Posts: 13,014
Registered: ‎08-04-2017
Kudos: 2199
Solutions: 639

Re: UniFi SDN Controller 5.9.29 Stable has been released

Hello @danmero,

 

Create an administrator on SITE1 and on SITE2 choose to invite an existing administrator.

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation/Easy Update Scripts | UniFi-VoIP Installation Scripts
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W 3x • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M
UCK-G2-PLUS • UCK-G2 • UCK
New Member
Posts: 1
Registered: ‎10-02-2018

Re: UniFi SDN Controller 5.9.29 Stable has been released

 
Emerging Member
Posts: 57
Registered: ‎02-09-2018
Kudos: 27
Solutions: 1

Re: UniFi SDN Controller 5.9.29 Stable has been released

[ Edited ]

https://community.ubnt.com/t5/UniFi-Routing-Switching/Unable-to-create-imcpv6-firewall-rule-invalid-...

 

After upgrading to UniFi Controller Software 5.9.32 (Build: atag_5.9.32_11402)  it isn't possibe to add IPv6 firewall rules the WAN IN interface anymore.  It worked wil older versions.

I will try to go back to 5.9.29

New Member
Posts: 19
Registered: ‎10-10-2014
Kudos: 2

Re: UniFi SDN Controller 5.9.29 Stable has been released

So is this version stable or not?  Should I really update version?  I am on version 5.6.37 but getting ready to install some XG AP's.  I am using a domain name instead of VPN for all 72 sites to talk back to the controller.

Emerging Member
Posts: 71
Registered: ‎12-02-2016
Kudos: 8

Re: UniFi SDN Controller 5.9.29 Stable has been released

[ Edited ]

I have been running this update on 2 networks (one with a Pro 4 and the other has the smaller USG unit) and NO issues at all for me. running 0.12 controller on my cloud-key as well if that matters. OH forgot to add I have been running this on both networks since about a week after release.

New Member
Posts: 16
Registered: ‎02-25-2017
Kudos: 8

Re: UniFi SDN Controller 5.9.29 Stable has been released

Wlan schedule Problem

 

Wlan time can still not be set correctly. Would only wlan tomorrow from 07.00 to the night 01.00 clock switched on have. Unfortunately it is still only until 24.00 clock. Bug in the 5.5.20-5.x update? Wait for the solution soon 2 year for the fix

New Member
Posts: 3
Registered: ‎08-20-2018

Re: UniFi SDN Controller 5.9.29 Stable has been released

Its stable in that it doesnt crash. I'm still having issues with it when trying to do some more exotic things (json processing seems to be broken) but generally its been working for me as long as i keep to the basics.
Highlighted
New Member
Posts: 45
Registered: ‎05-19-2015
Kudos: 14
Solutions: 1

Re: UniFi SDN Controller 5.9.29 Stable has been released

I've a little bug.

WAN vlan tag is forgotten after a couple of minutes. When I try to set it again to it just removes it.

 

Got two wan vlan's (Internet 300 and IPTV 640).

IPTV vlan is in a json file. Internet vlan is set via Settings -> Networks -> WAN. USG (4.4.36keeps provisioning.

 

{
  "interfaces": {
    "bridge": {
      "br0": {
        "aging": "300",
        "bridged-conntrack": "disable",
        "hello-time": "2",
        "max-age": "20",
        "priority": "32768",
        "promiscuous": "disable",
        "stp": "false"
      }
    },
    "ethernet": {
      "eth0": {
        "vif": {
          "640": {
            "bridge-group": {
              "bridge": "br0"
            }
          }
        }
      },
      "eth1": {
        "vif": {
          "640": {
            "bridge-group": {
              "bridge": "br0"
            }
          }
        }
      }
    }
  }

 

Needed to do a rollback to 5.8.30 for stable internet.

 

Any Idea how to fix it?

 

New Member
Posts: 3
Registered: ‎10-15-2017

Re: UniFi SDN Controller 5.9.29 Stable has been released

Hello ,

 

I too had encoutered the same problem. I had to hold back the latest Controller update for now. The latest Controller version practically renders my scripts and json invalid. e.g. keeps provisioning.

Emerging Member
Posts: 62
Registered: ‎01-02-2018
Kudos: 8

Re: UniFi SDN Controller 5.9.29 Stable has been released

Man this release is months old already, when is the next one supposed to be stable? Seems like there is a lot of problems with this one and Ive been holding back ugrading. Also still crossing my fingers theyll FINALLY add OpenVPN config support in the GUI. Not holding my breathe though.

New Member
Posts: 10
Registered: ‎10-03-2017
Kudos: 3

Re: UniFi SDN Controller 5.9.29 Stable has been released

This now an old problem impacting all users having to deal with a WAN made of 2 VLANs (mostly IPTV users with an Internet VLAN and a IPTV VLAN). It is certainly linked to a 5.9.20 evolution (Take locally configured WAN VLAN ID into account when adopting USG) which explain why the "WAN vlan tag is forgotten after a couple of minutes". With 2 VLANs, the USG does not know which one is the righ one and inform the controler that there is no WAN VLAN ID. 5.9.20 was released in Aug last year, and since then no evolution/correction It is perfectly working with a 5.8.30.

New Member
Posts: 45
Registered: ‎05-19-2015
Kudos: 14
Solutions: 1

Re: UniFi SDN Controller 5.9.29 Stable has been released

@cohortcw & @LaurentFR 5.10.5 beta fixed this for me. 

https://community.ubnt.com/t5/UniFi-Routing-Switching-Beta/UniFi-Network-Controller-5-10-5-Unstable-...

 

I know they created a ticket for this, it seems they fixed it Man Happy

 

New Member
Posts: 3
Registered: ‎10-15-2017

Re: UniFi SDN Controller 5.9.29 Stable has been released

@svenvg93, thanks but I think I will wait till the stable version is relased. You never know what will break again. Man Happy

Reply