04-16-2018 08:28 AM
I have a US-16-150W that I am having issues with. Current firmware is 22.214.171.12491, controller is local and 5.7.20. I am trying to connect the SFP port with the UF-MM-1G module to some legacy equipment that is not managed and is 10/100Mbps. I have LC to ST 62.5/125 1ft fiber patch cable connected. I get light shooting through the patch cable, I get Link/Activity light blinking on the legacy equipment. In the controller I get an RX fault status on the SFP port. I have tried all the manual config I can with overrides or the custom profiles. I feel like the issue is the unifi is not actually setting to 10 or 100 speed and its stuck in 1000. Also i tried manually upgrading to 126.96.36.19937 but i get an error. I have connected to other gigabit equipment and it seems to work. I also ran a patch cable from SFP1 to SFP2 and I got green lights on the ports. Any ideas
04-16-2018 09:15 AM
04-16-2018 09:54 AM - edited 04-16-2018 09:55 AM
Cable length does not allow. So the ethernet ports can be configured to 10-1000, but SFP can only be configured to 1000 correct? Is there an Ubiquiti product that does have SFP or SFP+ that can be configured to 100Mbps?