01/18/2019
Color Coordinating Patch Panels with UniFi Gears
Used Products
×1
×1
×1
×4
Location
Unnamed Road, Mesa, AZ 85212, USA
Description

 

Originally I had the black patch panels with labels mounted in my rack. However, I really wanted to color-coordinate the patch panels with the UniFi metallic silver faceplates. Unfortunately, it is almost impossible to find keystone patch panels in silver.

 

I also wanted to orient the RJ45 latch direction with the switch. That means I would have to mount the top patch panel upside down. With the numbers pre-painted to the panel, mounting it up-side-down looked strange.

 

I decided to spray paint the patch panels myself.

 

2019-01-08 21.03.15 - Copy.jpg

 

First I roughed up the panel with some sanding blocks, then cleaned the surface with nail polish remover.

 

 

2019-01-15 11.33.26 - Copy.jpg

 

Spray-painted in 30-40 quick passes, using Rust-Oleum Satin Nickle Metallic Spray Paint


2019-01-15 11.30.33 - Copy.jpg

 

I let the painted panels sat outside for 3-4 hours to let the VOC escape, then moved them into my oven.  I baked them at 170F for 4 hours.  Kept them inside the oven while the oven cooled down.  I then waited another two days for the paint to fully cure.

 

2019-01-15 16.04.26 - Copy.jpg

 

There is a slight color variation, but this is as close as it gets with what's available at big box stores.

 

2019-01-15 22.50.26 - Copy.jpg

 

Painted panels mounted.

 

2019-01-18 00.32.04 - Copy.jpg

 2019-01-18 00.44.29 - Copy.jpg

 

 

Color Coordinating Patch Panels with UniFi Gears

by on ‎01-18-2019 01:03 AM

 

Originally I had the black patch panels with labels mounted in my rack. However, I really wanted to color-coordinate the patch panels with the UniFi metallic silver faceplates. Unfortunately, it is almost impossible to find keystone patch panels in silver.

 

I also wanted to orient the RJ45 latch direction with the switch. That means I would have to mount the top patch panel upside down. With the numbers pre-painted to the panel, mounting it up-side-down looked strange.

 

I decided to spray paint the patch panels myself.

 

2019-01-08 21.03.15 - Copy.jpg

 

First I roughed up the panel with some sanding blocks, then cleaned the surface with nail polish remover.

 

 

2019-01-15 11.33.26 - Copy.jpg

 

Spray-painted in 30-40 quick passes, using Rust-Oleum Satin Nickle Metallic Spray Paint


2019-01-15 11.30.33 - Copy.jpg

 

I let the painted panels sat outside for 3-4 hours to let the VOC escape, then moved them into my oven.  I baked them at 170F for 4 hours.  Kept them inside the oven while the oven cooled down.  I then waited another two days for the paint to fully cure.

 

2019-01-15 16.04.26 - Copy.jpg

 

There is a slight color variation, but this is as close as it gets with what's available at big box stores.

 

2019-01-15 22.50.26 - Copy.jpg

 

Painted panels mounted.

 

2019-01-18 00.32.04 - Copy.jpg

 2019-01-18 00.44.29 - Copy.jpg

 

 

{"location":{"title":"Unnamed Road, Mesa, AZ 85212, USA","placeId":"ChIJLzq5oYqyK4cR3sOi330T0ZM"},"addedProducts":[{"id":"unifi-cloud-key-gen2-plus","count":1},{"id":"unifiswitch-48-500w","count":1},{"id":"unifi-security-gateway-pro","count":1},{"id":"unifi-ac-hd","count":4}],"solved":"","numbers":"","description":"","mainImage":"190517iCF720925FFABAEE3"}

Comments
by
on ‎01-22-2019 09:50 PM

Monoprice.com

by
on ‎01-23-2019 01:10 PM

Where are the labels?

by
on ‎01-23-2019 02:11 PM

Given the 1:1 nature of the patch panel ports to the switch, the labels are pretty redundant.

by
on ‎01-23-2019 02:31 PM

This is what I had originally, but it doesn't look good.  I am currently investigating some other solutions.

 

I can either print those on transparency slides or get a laser engraver.  Hmmm everyone needs a laser cutter/engraver.

 

In the picture, the patch panels seem darker, but in reality, they are lighter than Unifi gears.  It's the way panels sitting recessed by 2 mm.  I need to get some washers.

 

lCapture.PNG

by
on ‎01-31-2019 03:55 PM

They appear to be Monoprice keystone panels

 

https://www.monoprice.com/product?p_id=7260

by
on ‎02-01-2019 03:18 PM

Six-inch patch cables are a life-saver. This is a work in progress... IMG_0854.jpeg

by
on ‎02-05-2019 11:44 AM

Great setup.

I see you have the ReadyNas 2304. I have a ReadyNas 2304 in my home setup as well.

Do you run the NAS with IEEE 802.3ad LACP for the two 1G network connections? If yes, what Hash Types setup do you use to interface with the Unifi switch?

 

 

by
on ‎02-12-2019 07:20 AM

Auto on 2304.  If I use any other settings WoL won't work.

by
on ‎02-12-2019 08:55 PM

Cool, so set the ReadyNas to:

 

Capture Bond.JPG

 

And then set the switch to:

 

Capture agg.JPG

 

Best regards,

 

Ole

by
on ‎02-16-2019 12:46 PM

Actually my settings are:

 

READYNAS: IEEE 802.3ad LACP, Hash Type: Layer 3+4

Unifi Switch: "Switching" (no aggregate)

 

Any other setting combination prevents Wake on LAN from working.