05/03/2018
Complete Unifi system.
Reason for Installation
The project was to provide customers with a stable, fast and uninterrupted WIFI connection. So I chose to install an in-wall access point so that reception is good in every room. I opted for the UNIFI serie for monitoring and remote support. Other similar projects are coming soon. We will repeat the same configuration.
Used Products
×16
×1
×1
×1
Location
Rue Saint-Pierre, Québec, QC, Canada
Description

20180503_141111.jpg6U cabinet Startech, USP 1350VA Cyberpower, ATA adaptor Granstream, 2 NVR.

 

20180503_141121.jpgLoaded but functional. It only remains to monitor from a distance that everything works well.

 

20180503_141134.jpgStartech cat6 patch panel, USG-PRO, US-24-250W, and cloud key.

 

20180503_143431.jpg2 Modem configured in load balancing mode. I look forward to see how the system will handle the load.

 

First Day.JPGFirst Day, Customers start to arrive.

 

Complete Unifi system.

by on ‎05-03-2018 03:09 PM

20180503_141111.jpg6U cabinet Startech, USP 1350VA Cyberpower, ATA adaptor Granstream, 2 NVR.

 

20180503_141121.jpgLoaded but functional. It only remains to monitor from a distance that everything works well.

 

20180503_141134.jpgStartech cat6 patch panel, USG-PRO, US-24-250W, and cloud key.

 

20180503_143431.jpg2 Modem configured in load balancing mode. I look forward to see how the system will handle the load.

 

First Day.JPGFirst Day, Customers start to arrive.

 

{"location":{"title":"Rue Saint-Pierre, Québec, QC, Canada","placeId":"ChIJp0YHeN2VuEwR_5kDpQiIqPQ"},"addedProducts":[{"id":"inwall-ap","count":16},{"id":"unifi-security-gateway-pro","count":1},{"id":"unifiswitch-24-250w","count":1},{"id":"unifi-cloud-key","count":1}],"solved":"","numbers":"","description":"The project was to provide customers with a stable, fast and uninterrupted WIFI connection. So I chose to install an in-wall access point so that reception is good in every room. I opted for the UNIFI serie for monitoring and remote support.\n\nOther similar projects are coming soon. We will repeat the same configuration.","mainImage":"155494iECF0D41E5E835417"}

Comments
by
on ‎05-03-2018 09:15 PM

Excellent Job! All looks very clean and professional.

by
on ‎05-07-2018 01:56 AM

Nice looking install.

I would strongly suggest using proper Wifi-Channels though.

On 2.4 Ghz devide evenly on channels 1,6,11, everything else will overlap. (see https://en.wikipedia.org/wiki/List_of_WLAN_channels#/media/File:NonOverlappingChannels2.4GHzWLAN-en.... )

 

Also further devide your APs in the 5Ghz spectrum.

 

This will increase your network speed and roaming.

by
on ‎05-07-2018 04:43 PM

Thank you nikeil for your comment.

 

Initially, I had the intension of alternating between channels 1, 6 and 11 as I usually do. This time, I wanted to try the "RF Environment" tool and from the first to the 16th i did a scan. And I got the result I posted.

 

I could also reduce the transmission power of the APs given the short area to cover to reduce interferences.

 

In another similar project, where I will only have 3 APs Pro to install, 1 by floor, that's what I'm going to do. Fix them a different channel. But since I had not been consulted about the location of the APs, I may have to install some Mesh APs to repeat the signal at the end of the building. But they are initially well centered. The walls are all closed, it is no longer possible to pass other Ethernet cables.