07/14/2018
Wireless Unifi Camera on a Pole
Used Products
×1
×1
Location
380 Cedar Street, Luxemburg, WI, USA
Description

IMG_2923.JPGFinished Product

 

IMG_2925.JPGShowing the Pole. About 25ft up.

 

IMG_2931.JPGUAP Locom2 bridged back to a locom2 on the side of the building.

 

IMG_2933.JPGLuckily the customer had a lift.

 

IMG_2957.JPGPower and Cat6

 

IMG_2958.JPGCheap solution for power. Ended up wrapping the unit in a plastic bag and taping the ends to keep the water out.

 

I had a customer that needed a camera on the outskirts of their property. They had a small 4ft power pull in the area so I was able to convince them to install a pole and a light. The POE injectors are able to fit inside the pole leaving a very clean finished look. The camera sends back to a Loco M2 on the main building which is connected to a 16port gigabit switch and a usg and Unif Video software running on a HP EliteDesk 8300 i5 8gb RAM. 

Wireless Unifi Camera on a Pole

by ‎07-14-2018 10:09 AM - edited ‎07-14-2018 10:15 AM

IMG_2923.JPGFinished Product

 

IMG_2925.JPGShowing the Pole. About 25ft up.

 

IMG_2931.JPGUAP Locom2 bridged back to a locom2 on the side of the building.

 

IMG_2933.JPGLuckily the customer had a lift.

 

IMG_2957.JPGPower and Cat6

 

IMG_2958.JPGCheap solution for power. Ended up wrapping the unit in a plastic bag and taping the ends to keep the water out.

 

I had a customer that needed a camera on the outskirts of their property. They had a small 4ft power pull in the area so I was able to convince them to install a pole and a light. The POE injectors are able to fit inside the pole leaving a very clean finished look. The camera sends back to a Loco M2 on the main building which is connected to a 16port gigabit switch and a usg and Unif Video software running on a HP EliteDesk 8300 i5 8gb RAM. 

{"location":{"title":"380 Cedar Street, Luxemburg, WI, USA","placeId":"EiYzODAgQ2VkYXIgU3QsIEx1eGVtYnVyZywgV0kgNTQyMTcsIFVTQSIbEhkKFAoSCdm_QhNFxQKIEee22_RHFo90EPwC"},"addedProducts":[{"id":"unifi-security-gateway","count":1},{"id":"unifi-ap","count":1}],"solved":"","numbers":"","description":"","mainImage":"165705iF4500F67453BE748"}

Comments
by
on ‎07-26-2018 11:46 AM

Why did you use a plastic zip tie to mount the nanostation and not a metal clamp?