Upcoming Maintenance Alert:

The UBNT Community will be upgraded at 5pm MDT on April 25th. During this time the community forums will be set to read-only status.

Learn more

×

UniFi 5.4.18 Stable Candidate has been released

by Ubiquiti Employee on ‎06-16-2017 11:35 AM - last edited a month ago (24,184 Views)

Notes:

  • As always, make a backup prior to upgrading.
  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It's also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • DFS channels can not be used for wireless uplink in the US. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs. 
  • Official UniFi MIBs can be downloaded from HERE and HERE (those are 2 different files).
  • We no longer support Java version 6, it needs to be 7 or later. We recommend Java version 8.
  • Features like airtime fairness, bandsteering, load balancing and minimum RSSI are default disabled. If you need them you need to go to Settings>Site and check Enable advanced features.
  • If you previously used Google Maps for a site map, then you have to enable this feature again by adding an API key. This is done under Settings>Controller. There is a linked guide with instructions.

 

Controller bugfixes/changes from 5.4.17

  • Add Support file warning.
  • Improve navigation accessibility.
  • Fix an issue when trying to register controller with UniFi cloud tie in (unifi.ubnt.com).
  • Various backend improvements.

 

Firmware changes from 3.7.55

  • [UAPG3] Fix guest portal when bonding is enabled.
  • [UAPG3] Various stability, performance and backend improvements.
  • [UAPG2] Add QBSS Load IE.
  • [UAPG2] Add ramoops support to save kernel crashes in high memory.
  • [UAPG1/G2] 2.4G performance improvements.
  • [UAPG1] Fix for initialization issues on AR724x/QCA933x based UAPs.
  • [UAPG1] Fix issue with missing ca-certs package on some models.
  • [EDU] Fix an issue with EDU app not playing streams on 5.4.x.
  • [EDU] Fix bug where baresip wouldn't properly update.*
  • [ACIW] Fix so the port is not on any VLAN if it is disabled.
  • [ACIW] Implement per port VLAN control.*
  • [UAP] Fix an issue with hotspot portal when using broadcast/multicast filter.
  • [UAP] Various backend improvements.
  • [UAP] Add DFS event alerts.*
  • [UAP] Fix a bug in the rate control algorithm.
  • [UAP] Fix Termination-Action so it behaves as per RFC3580.
  • [USW] Fix an issue with the forwarding database counters.
  • [USW] Add IGMP header checking settings.*
  • [USW] Fix some code that prevented manual reboot requests from working as expected in some cases. 
  • [USW] Increase CLI lines for pagination from 24 to 36.
  • [USW] Shutdown all ports before switch reboot, to prevent unncessary broadcast storms. 
  • [USW] Gracefully reboot switch after successful firmware update.
  • [USW] Add LLDP info support.
  • [HW] Increase logging for firmware upgrade.*
  • [SEC] Security improvement from HackerOne report.

*Controller support pending.

Firmware 3.8.3 for UAP/USW has been pushed to this release (see HERE).

 

Bundled Firmware:

 

Download: