a week ago
New US 8-60W Switch
New G3 Camera
New G# Flex Camera
All new from Unifi. Adopted US8-60W on Unifi Controller and updated Firmware, Green - Operating Fine
Connected G3 Camera to port 5, Operating Fine on Unifi NVR
Connected G3 Flex to same port with same wire, Nothing/Dead/No Power ????
Connected G3 Camera to port 5, Operating Fine on Unifi NVR...
The original G3 was 24V passive only so I assume you mean the G3-AF and that there was not a PoE injector or Instant AF converter inline? If you used an injector, the PoE might have been manually turned off on port 5.
If you used an Instant AF converter with the G3, it should be removed and the G3-Flex connected directly.