06-09-2016 05:18 AM
I have 16 x AP AC LR wifi units and 1x Ubiquiti EdgeSwitch 24 250W
I have connected all units to the switch and power it up.
At first no acces point will power up.
I have accesed the UI for the swithc and in the POE settings changed from POE+AUTO to 24V passive. After I applied the config 8 AP's started to work but the other 8 are not. I have selected all ports except 23 and 24 to be configured for 24V passive.
I have switch some of them of and I cannot get more than 8 AP's connected at 1 time.
Can you please assit?
06-21-2017 02:40 PM
If you are doing passive power, the switch is unable to negotiate how much power the device actually needs so it just pumps out 25.5w to the PoE device...
25.5w * 8 devices = 204w
The switch needs to be able to power itself which leaves less that 25.5w available so you can't power anything else