Reply
Ubiquiti Employee
Posts: 8,695
Registered: ‎01-28-2013
Kudos: 14109
Solutions: 594
Contributions: 20

[FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

Please see our release post HERE.

New Member
Posts: 7
Registered: ‎09-13-2013
Kudos: 2

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

When will the "Check Firmware Update", update the bundles.json to update the cache firmware, to update the APs?

 

I have the same question concerning the other AP Firmware updates.

 

 

 

Member
Posts: 115
Registered: ‎06-05-2016
Kudos: 11

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

As I read UAP AC will be not supported in the future (Unifi controller 5.7.x and later). I have this model:

 

UBIQUITI UniFi AC PRO 1750 Mbps AP/Hotspot 2,4/5 GHz, 802.11ac, MIMO 3×3

 

Is my model affected?

Member
Posts: 265
Registered: ‎02-12-2013
Kudos: 78
Solutions: 21

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

@madrian No, your model will continue to work - it's the square AC models that are being ended.

If you are running the square models, then you have to stay with 5.6.x controller and (sorry, not sure) 3.8.x firmware.
Emerging Member
Posts: 52
Registered: ‎10-24-2013

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

I have the UAP-AC-OD, that's no longer supported in 5.7, correct?

this one: https://www.ubnt.com/unifi/unifi-ap-ac-outdoor/

Ubiquiti Employee
Posts: 8,695
Registered: ‎01-28-2013
Kudos: 14109
Solutions: 594
Contributions: 20

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released


@pookguy88 wrote:

I have the UAP-AC-OD, that's no longer supported in 5.7, correct?

this one: https://www.ubnt.com/unifi/unifi-ap-ac-outdoor/


Yes, that is correct.

 

Cheers,

Mike

Established Member
Posts: 893
Registered: ‎03-28-2013
Kudos: 262
Solutions: 36

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released


@pookguy88wrote:

I have the UAP-AC-OD, that's no longer supported in 5.7, correct?

this one: https://www.ubnt.com/unifi/unifi-ap-ac-outdoor/


 

Yes.

 

You'd hope that a large label would be plastered across this device on the Unifi website, saying 'EOL in controller', something to help pass the message along.

Emerging Member
Posts: 52
Registered: ‎10-24-2013

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released


@JimBobwrote:

@pookguy88wrote:

I have the UAP-AC-OD, that's no longer supported in 5.7, correct?

this one: https://www.ubnt.com/unifi/unifi-ap-ac-outdoor/


 

Yes.

 

You'd hope that a large label would be plastered across this device on the Unifi website, saying 'EOL in controller', something to help pass the message along.


You don't know how much I would've appreciated that, spent so much time last night trying to figure it out

Emerging Member
Posts: 41
Registered: ‎01-15-2016
Kudos: 2
Solutions: 1

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

I'm still showing 3.9.19.8123 on my devices page. Is there a way to force update to latest FW? In the past I would get a notification of a new update but since over a month nothing.
New Member
Posts: 7
Registered: ‎09-13-2013
Kudos: 2

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

@UBNT-MikeDstill waiting on an answer to when the firmware updates are updated/cached to the controller.

 

2018-03-21_090120.png

 

 

Controller logs when clicking on "Check Firmware Update":

 

 

 

Contents of the /run/unifi/update.json:

 

{ "last_checked" : 1521571290 , "update_available" : false}

 

 

My controller is configured for UTC time.

 

 

New Member
Posts: 2
Registered: ‎04-28-2015
Kudos: 1

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

Same issue... Wondering when 3.8.16.6786 will be available via 5.6.30 controller...

Ubiquiti Employee
Posts: 8,695
Registered: ‎01-28-2013
Kudos: 14109
Solutions: 594
Contributions: 20

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

@mcqueedLPS & @mattk926: the update was just pushed to 5.6.22, 5.6.26, 5.6.29, 5.6.30. Previously it was only pushed to 5.6.36. It will only check once a day, so feel free to perform a manual check.

 

Cheers,

Mike

New Member
Posts: 2
Registered: ‎04-28-2015
Kudos: 1

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

That fixed it Thank you!
New Member
Posts: 26
Registered: ‎02-17-2016

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

Will the ap ac OD be totally dead once I upgrade to 5.6 or will I still be able to configure it manually  / separately from the controller ?

New Member
Posts: 36
Registered: ‎08-21-2015
Kudos: 21
Solutions: 2

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

As the compatibility between the EOL'd APs and various UniFi Controller versions is not well defined, I will share my results in case it is useful to anybody else.

 

1. Issuing the upgrade as a custom firmware upgrade from the UniFi Controller did not work.

 

2. sshing in to the APs (an AP-AC and an AP-AC v2) and running the upgrade comment manually did work. UniFi Controller 5.7.20 reports the upgraded version number and still reports basic information about them (model, version, IP address, etc). 

 

New Member
Posts: 1
Registered: ‎05-12-2018

Re: [FIRMWARE] 3.8.16.6786 for UAP-AC, UAP-AC v2, and UAP-AC-OD has been released

 HI

yes i had the same query!

but if they are running the square models, then you have to stay with 5.6.x controller and (sorry, not sure) 3.8.x firmware.
aneways lets see what update this brings !
regards
adam

Reply