Reply
New Member
Posts: 11
Registered: ‎03-07-2016

Looking to increase Wi-Fi and cellular signal

[ Edited ]

I live out in the country where as you know internet and cell signal is most of the time very poor but we still get cell signal in some areas.

What I would like to do is have some help choosing what I should use to increase wifi and cell signal and have reception within at least 200 feet but the more the better you know. We have lots of metal buildings which of course deflects the cell signal and wifi and since the nearest cell tower our signal comes from is on the opposite side of our main garage it should be, we get no signal.

The highest point is a 50ft tall tv antenna used to receive local channels that is higher then every metal building so I feel there would be signal up there, we also have a lift I can use to take me up there to test if there is signal before I put whatever i'm putting up there.

So in short:

A cell signal amplifier if ubiquiti has one (i'm not sure)

Something to increase wifi signal that can be connected to by wireless devices and not a type of receiver or something (this would have to be able to penetrate metal roofing and walls)

Both of these would be put on top of the antenna

But for the wifi, if it resorts to this, I could just have a point to point connection no more than 200ft and have a wireless router in our garage but thats no fun is it now.

SuperUser
Posts: 40,927
Registered: ‎06-23-2009
Kudos: 8301
Solutions: 1353

Re: Looking to increase Wi-Fi and cellular signal

I'm confused by your question.

 

Ubiquiti does nothing with cellular service.

 

Except for celluar service, Internet service isn't 

broadcast offering where you can put up a tall  

antenna to improve it.

 

If you want WiFi inside metal buildings, you can

wire them with access points. But of course they

are of little use if you don't have good Internet.   Dave


> HQ in Seacoast region New Hampshire U.S.A.
> Ubiquiti Certified Trainer [UCT] for:
     UBWA [AirMax] / UEWA [UniFi] / UBRSS [routers]
UBNT.NH@gmail.com
New Member
Posts: 11
Registered: ‎03-07-2016

Re: Looking to increase Wi-Fi and cellular signal


@Dave-D wrote:

I'm confused by your question.

 

Ubiquiti does nothing with cellular service.

 

Except for celluar service, Internet service isn't 

broadcast offering where you can put up a tall  

antenna to improve it.

 

If you want WiFi inside metal buildings, you can

wire them with access points. But of course they

are of little use if you don't have good Internet.   Dave


Ok so improving cell signal is out of the question. I am not wanting to use the antenna to improve Wi-Fi, I want to put something ubiquiti offers on top as it is the highest point around. Is there anything ubiquiti has that can be put outdoors, have an Ethernet cable ran to it, and be used as an access point with superior reception?

Established Member
Posts: 1,356
Registered: ‎01-29-2015
Kudos: 181
Solutions: 51

Re: Looking to increase Wi-Fi and cellular signal

[ Edited ]

They have devices that range from mild to wild for outdoor APs. How big do you want to go? What is your goal? Are you trying to get wifi inside metal buildings from one outdoor AP? That isn't a good solution. Can you post a Google Earth/Maps picture of what you are trying to do?

 

A pair of Nanobeam 5AC Gen2s could be used to tie your 200ft together. A little overkill maybe, but I like overkill.

Highlighted
Member
Posts: 183
Registered: ‎07-17-2018
Kudos: 45
Solutions: 8

Re: Looking to increase Wi-Fi and cellular signal

Even if something existed that you could put on top of that tower and BLAST wifi down into your metal, rf-insulated builings..... that still won't work like you're thinking it will.  Your wifi devices have to be able to communicate BACK TO the access point.  They won't be able to do that effectively through a metal building. 

 

Your only real option is to have an access point located inside each metal building.  You can uplink those APs either over a wire or wirelessly, but you'll really need to have an AP inside the buildings.

1G FTTH | USG4Pro | US-16-150W | US-8-150W | US-8 | UAP-AC-PRO | UAP-AC-nanoHD | UAP-AC-IW | UAP-AC-IW-HD | UAP-AC-M | UCK2+ | UVC-Flex
New Member
Posts: 11
Registered: ‎03-07-2016

Re: Looking to increase Wi-Fi and cellular signal

[ Edited ]

@RobbieH wrote:

They have devices that range from mild to wild for outdoor APs. How big do you want to go? What is your goal? Are you trying to get wifi inside metal buildings from one outdoor AP? That isn't a good solution. Can you post a Google Earth/Maps picture of what you are trying to do?

 

A pair of Nanobeam 5AC Gen2s could be used to tie your 200ft together. A little overkill maybe, but I like overkill.



Could I have something that was able to broadcast a wireless signal everywhere outdoors but also have an access point inside the building that is connected to whatever is on the antenna? If I understand stand correctly that would be a PtMp correct? Also i guess I should what our internet speeds are, We can get at least 12 Mbit/s on a bonded DSL line and then there is an option to go up to 24 but we have not tried that because the ISP says it's we're to far from the terminal for it to do any good.

Plan.jpg

Regular Member
Posts: 421
Registered: ‎09-13-2017
Kudos: 74
Solutions: 25

Re: Looking to increase Wi-Fi and cellular signal

You can buy the biggest antenna you like to blast signal, but how do you expect your laptops, computers, tablets, phones etc to talk back?

You need to place access points in each of the buildings you require wifi signal.

Just because I can shout at you 200m away, and you can hear it, does not mean you can shout back as far..

Reply