Reply
Highlighted
New Member
Posts: 5
Registered: ‎06-12-2018
Accepted Solution

Meshing with a nanoHD

I am new to the forums so I apologize if I am not including the info needed, etc. 


I am trying to set up a network at a large residdence hall. 

 

  • 1 x USG pro 4
  • 1 x Cloud Key Gen 1
  • 1 x Switch 8 (60W)
  • 3 x NanoHD (Wired)
  • 2 x NanoHD (Mesh)

 

My NanoHD (Mesh) units will not leave ISOLATED. 

 

I am testing with two units now.. 1 wired and 1 "wireless" 

 

They are both on the same channel (36)

Updated firmware  ( 3.9.54.9373)

I'v tried forgetting, resetting, re-adopting, etc

using a UBNT PoE injector on the "wireless) unit 

They are 10Ft away from eachother

 

The "wireless" unit will not leave ISOLATED.. I am at my witts end. 

 

I have set up more than a handfull of UBNT deployments with mesh on AC Pro's... First time wiht NanoHD's. 

Any help is appreciated. 

 

 


Accepted Solutions
Senior Member
Posts: 10,126
Registered: ‎08-04-2017
Kudos: 1643
Solutions: 499

Re: Meshing with a nanoHD

Hello @TimsterUNT,

 

Did you upgrade the firmware to 4.0.9 on the UAPs?

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation/Easy Update Scripts | UniFi-VoIP Installation Scripts
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M
UCK-G2 • UCK

View solution in original post


All Replies
Established Member
Posts: 1,356
Registered: ‎01-29-2015
Kudos: 182
Solutions: 51

Re: Meshing with a nanoHD

[ Edited ]

Do you have this enabled?

Enable connectivity monitor and wireless uplink

Senior Member
Posts: 10,126
Registered: ‎08-04-2017
Kudos: 1643
Solutions: 499

Re: Meshing with a nanoHD

[ Edited ]

Hello @TimsterUNT,

 

Please upgrade your UAPs to 4.0.9

Devices > UAP > Config > Manage Device > Custom Upgrade

 

Do you have the Uplink Connectivity Monitor enabled?

Settings > Site > Uplink Connectivity Monitor

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation/Easy Update Scripts | UniFi-VoIP Installation Scripts
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M
UCK-G2 • UCK
New Member
Posts: 5
Registered: ‎06-12-2018

Re: Meshing with a nanoHD

[ Edited ]

Sorry, Guess I should of specified. 

I did indeed set up wired first, that's how I changed the channel and enabled wireless up-link. 

 

Once I remove the LAN cable from the PoE injector they just sit in ISOLATED with flashing blue ring. 

 

Thanks for the reply. 

Established Member
Posts: 1,356
Registered: ‎01-29-2015
Kudos: 182
Solutions: 51

Re: Meshing with a nanoHD

Sorry, I misread at first and changed my answer.

New Member
Posts: 5
Registered: ‎06-12-2018

Re: Meshing with a nanoHD

[ Edited ]
Senior Member
Posts: 10,126
Registered: ‎08-04-2017
Kudos: 1643
Solutions: 499

Re: Meshing with a nanoHD

Hello @TimsterUNT,

 

Did you upgrade the firmware to 4.0.9 on the UAPs?

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation/Easy Update Scripts | UniFi-VoIP Installation Scripts
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M
UCK-G2 • UCK
New Member
Posts: 5
Registered: ‎06-12-2018

Re: Meshing with a nanoHD

@AmazedMender16

 

Updating two of them for testing now, this is a prdocution enviorment.

New Member
Posts: 5
Registered: ‎06-12-2018

Re: Meshing with a nanoHD

Wow.. That did it. worked.png

Established Member
Posts: 1,356
Registered: ‎01-29-2015
Kudos: 182
Solutions: 51

Re: Meshing with a nanoHD

Yeah, the NanoHD is really new, and upgrading to 4.x seems to fix the meshing issues with them. I'm not surprised to see this.

Senior Member
Posts: 10,126
Registered: ‎08-04-2017
Kudos: 1643
Solutions: 499

Re: Meshing with a nanoHD

Hello @TimsterUNT,

 

Awesome, thanks for reporting back!

Wish you the best with your setup!

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation/Easy Update Scripts | UniFi-VoIP Installation Scripts
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M
UCK-G2 • UCK
Reply