Reply
New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

UniFi AP-nanoHD Blinking White Every Morning?

NEW! UniFi AP-nanoHD Firmware Version 4.0.21.9965

 

Every morning when I come in the device is disconnected from the controller. When I go look at it the LED is blinking white. I unplug it and plug it back in. Then it connects, turns blue, and works all day.

 

The other clue is that it only ever connects as 100FDX despite being connected to a 1GB port.

 

Are there some logs I can pull to find out what is happening?

Senior Member
Posts: 23,730
Registered: ‎08-04-2017
Kudos: 4494
Solutions: 1167

Re: UniFi AP-nanoHD Blinking White Every Morning?

Hello @Dirty_White_Hat,

 

SSH into the UAP and see if there are any oopsdump messages.

oopsdump

Do you have a syslog server running?

What advanced features do you have turned on?

 

Have you tried 4.0.30?

 

 

Regards,

Glenn R.

 

CC @UBNT-AngusL 

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation Scripts | UniFi-VoIP Installation Scripts
USG-XG-8 • USG-4-PRO • USG
US-XG-16 • US-48-500W • US-24-POE-250W 2x • US-16-POE-150W 3x • US-24 • US-8-150W • US-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD 2x • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M • UAP-AC-M-PRO 2x
UAS-XG • UCK-G2-PLUS • UCK-G2 • UCK
New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

Re: UniFi AP-nanoHD Blinking White Every Morning?

Here is the oopsdump response:

 

.v4.0.21# oopsdump
cat: can't open '/sys/fs/pstore/dmesg-ramoops-*': No such file or directory

syslog server = yes

 

Advanced options?

I'm going to need something more specifc than that. There is a check box that says "Enable Advanced Features" and that is in the disabled state.

New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

Re: UniFi AP-nanoHD Blinking White Every Morning?

And now I'm running 4.0.30.10217

 

I let that ride for a few days and see how it goes.

Senior Member
Posts: 23,730
Registered: ‎08-04-2017
Kudos: 4494
Solutions: 1167

Re: UniFi AP-nanoHD Blinking White Every Morning?

Hello @Dirty_White_Hat,

 

Keep me posted!

 

 

Regards,

Glenn R.

Cloud Hosted Controllers | Glenn R. | UniFi Installation/Easy Update Scripts | UniFi-Video Installation Scripts | UniFi-VoIP Installation Scripts
USG-XG-8 • USG-4-PRO • USG
US-XG-16 • US-48-500W • US-24-POE-250W 2x • US-16-POE-150W 3x • US-24 • US-8-150W • US-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD 2x • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M • UAP-AC-M-PRO 2x
UAS-XG • UCK-G2-PLUS • UCK-G2 • UCK
Ubiquiti Employee
Posts: 415
Registered: ‎04-16-2017
Kudos: 59
Solutions: 7

Re: UniFi AP-nanoHD Blinking White Every Morning?

@Dirty_White_Hat 

Do you have WLAN in 2.4G radio of nanoHD?

 

 

Thanks,

Angus

New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

Re: UniFi AP-nanoHD Blinking White Every Morning?

@UBNT-AngusLYes, both radios are on and working. I see clients on both.

Highlighted
Ubiquiti Employee
Posts: 415
Registered: ‎04-16-2017
Kudos: 59
Solutions: 7

Re: UniFi AP-nanoHD Blinking White Every Morning?

[ Edited ]

@Dirty_White_Hat 

Could you disable the WLAN on 2.4g radio and try again?

What's the board revision?

 

Thanks,

Angus

New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

Re: UniFi AP-nanoHD Blinking White Every Morning?

@UBNT-AngusLNo, No I can't. 75% of the currently connected client devices are on the 2.4 spectrum. I'm not going to deny service to them.

New Member
Posts: 22
Registered: ‎04-16-2018
Kudos: 2

Re: UniFi AP-nanoHD Blinking White Every Morning?

UPDATE:

The nanoHD ran longer this time. It survived 3 days but when I came in this morning it was the same result. Blinking white light. Needed hard reset. Should I just return this device? Maybe it's bad.

Reply