Reply
Highlighted
Member
Posts: 250
Registered: ‎11-07-2016
Kudos: 22
Solutions: 1

Aircontrol 2.1 shows wrong history for capacity, throughput seems correct

See the difference in capacity speed, 400mbit/near 400mbit in aircontrol vs 233/266 mbit shown in airos gui:

 

bolandvt1.PNGbolandvt2.PNG

 

Seems almost like the capacity is from another link while throughput history matches this link perfectly.

 

Kind regards

David

Veteran Member
Posts: 4,825
Registered: ‎03-02-2015
Kudos: 934
Solutions: 218

Re: Aircontrol 2.1 shows wrong history for capacity, throughput seems correct

Aircontrol RX / TX Rate is NOT capacity from airOS WebGUI .
You have to add capacity to AC2 charts.
===================================================
We all work for KUDOs here.
Thx
Member
Posts: 250
Registered: ‎11-07-2016
Kudos: 22
Solutions: 1

Re: Aircontrol 2.1 shows wrong history for capacity, throughput seems correct

[ Edited ]

Aha, capacity wasn't in the aircontrol menu so I translated it to "rate" in my head. Rate is raw speed and capacity is raw speed minus calculated disturbance? Rate isn't visible in the airos webgui?

Veteran Member
Posts: 4,825
Registered: ‎03-02-2015
Kudos: 934
Solutions: 218

Re: Aircontrol 2.1 shows RX Rate instead of link capacity

[ Edited ]

at least not in airOS8 anymore (can be calculated from modulation rate) because it doesn't tell you anything about your real world wireless condition beyond bare modulation rate.
Add 'isolated capacity', 'airtime' and/or throughput for all airOS 8 devices to AC2 charts and device details.

 

btw: I guess it's limited by regulation but i would keep signals above -55dBm if it's possible by increasing TX power.

===================================================
We all work for KUDOs here.
Thx
Reply