06-12-2018 11:42 PM
First of all i am liking the new AirCube, had good feedback from customers on both the look and speed of the device.
However the lack of IPv6 support has slowed down my deployemnt.
2 years ago when i started my WISP i took the decision to go down the routed approach and not the PPPoE and to also run the system with dual stack.
This has been working great and with the L2TP service from A&A i am also able to do IPv6 routing over backup links.
However the new AirCub has no IPv6 support which is a little disapointing to see a new product released without IPv6.
Is there any planned relase dates.
06-13-2018 05:51 AM
this is in our roadmap (https://community.ubnt.com/t5/airCube/airCube-features-roadmap/m-p/2345639#M1). Even this probably won't happen very soon we try our best by prioritising requested features.
Thanks for the feedback!
06-14-2018 02:09 AM
In the UK is it getting more and more difficult to get IPv4 addresses
The Digital Economy Act means if i am natting i need to log users access.
Being able to give the users IPv6 and use a 6to4 from my ISP means i dont have to do this logging.
06-14-2018 01:19 PM
Very. CGN is ugly for many reasons.
Remember that your clients aren't Comcasts or Rogers or Telkom; it's the smaller shops that're going to have a harder time getting and financing more and more v4 assignments.
Our plan going forward is CGN v4 and native v6, and despite everything else in the "Why the AirCube is not for me" thread, v6 is certainly a show-stopper for mass deployment. (granted, for us "mass deployment" is a few hundred units.)
08-01-2018 05:33 PM
In this moment, I'm testing an Aircube AC in bridge mode.
For some reason, my devices not get a IPv6 address.
If I turn off aircube and turn on wifi on my Huawei ONU with the same SSID and Password, my devices get a IPv6.
When I plug my computer with a cable on Aircube Lan Port my computer receive a IPv6 address.
Sameone saw this behavior? My Aircube update to V2.4.0-BETA01.C80A8C8.180725.1716 BETA on first upgrade.
08-02-2018 03:42 AM
08-20-2018 04:23 PM
I have a Aircube AC. Today I updated to Beta v2.4.0-beta03.36683e6.180808.1211 and the behavihor is the same.
When I plug the ethernet cable from my modem to my computer I get an IPv6 address (/64). So, when I plug the same cable to Aircube (LAN1) and I connecty my computer do Wi-Fi I not receive the IPv6 address. If I disconnect from Aircube and connect to my Modem I get a IPv6.
Other test that I did, was connect my machine to Aircube with a Ethernet Cable and same thing. The Aircube is configured in Bridge Mode.
Anyone saw this behavihor?
@UBNT-SNK can you investigate this?
Thanks for the help!