Reply
New Member
Posts: 3
Registered: ‎10-03-2017

Nanobeam AC to Rocket AC in Ptmp not finding.

When i set The rocket ac and nanobeam ac to ptmp they cannot see each other? I can see and lock them to eachother in ptp mode. Any ideas? Both are running 8.4 firmwares.

New Member
Posts: 35
Registered: ‎02-10-2016
Kudos: 4

Re: Nanobeam AC to Rocket AC in Ptmp not finding.

Greetings. Please show wireless settings and network settings. Also the firmware version. Since if you use a secure wireless network, temporarily delete the password and check. I had a problem with 8.3.2.

Ubiquiti Employee
Posts: 11,582
Registered: ‎11-27-2012
Kudos: 3692
Solutions: 760
Contributions: 73

Re: Nanobeam AC to Rocket AC in Ptmp not finding.

As @MaxRevol mentioned, please share the Wireless tab.  If you are in the US or Canada, confirm that both devices support the same 5GHz bands.  Some units may require additional activation.

 

 

UBNT_Alternate_Logo.png
Ubiquiti Networks airMAX Support Team

Check out our ever-evolving Help Center for answers to many common questions!

FREE UBWA Student Guide-Great RF Primer!

Member
Posts: 126
Registered: ‎06-19-2013
Kudos: 52
Solutions: 3

Re: Nanobeam AC to Rocket AC in Ptmp not finding.

I had this issue recently using mixed more. Turned out I had my AP set to "AUTO" frequency. Once I manually set a frequency, my CPE were able to see the AP.

 

Follow their advice though, and post screenshot of your AP wireless tab, I started there, and they helped me straight away!

 

Good luck mate

Reply