12-08-2018 02:14 PM
If the Nano Station Loco M2 access is by cat5 cable is it stll necessary to have security setup?
I did add secuiry in the setup, but once I did, I could not access any IP's that it was transmitting to. So I had to undo the security in it.
12-08-2018 02:35 PM
12-08-2018 04:27 PM
The nano station is sending data from a PC to wireless ESP-01 modules which output the data hardwired to pixel strings. The Nano Station isn't associated with my internet access. The ESP-01's have the ssid and password of the Nano Station. So that is the function of the Nano Station.
That being said, can someone still get in and disrupt the flow of data if I don't setup WPA2 Pesonal security?
12-08-2018 04:37 PM
12-08-2018 06:53 PM
12-08-2018 06:56 PM
12-17-2018 07:25 AM
Sorry for late reply, I did add security to the Nano Station.
I purchased the Nano Station on recommendation from another user whom is using to send data to ESP-01 8266 modules. After I got it set up I had noticed some lagging in signal at different times . I had the modules in Unicast mode. Then I changed them to Multicast and it appeared that the signal lagging had cleared up. But the other night I thnk I did catch it at a moment when I saw a some lagging again. So, if I decide to get another model I'll check out your recommendation.
01-05-2019 06:14 AM - edited 01-12-2019 06:42 AM
It is not that easy to get into your data and neither is immposible. So its better if you be secured from your side. Although without security someone may easily access some of your saved passwords.