Emerging Member
Posts: 71
Registered: ‎12-19-2008
Kudos: 5

B5M TX power issues

I have an AP that seems to have problems when I set the TX power lower, such as 22dB from the default max (25dB). It seems to just not transmit at all, or very low. Seems to do it at 5, 10, and 20mhz. Bump it back up to 25dB and it transmits just fine.

I've swapped B5M's at the ap, shortened the 150' run (shielded cat5e and ends) by a few feet on each end, put new ends on, and used 15, 18, and 24VDC 3 prong power supplies.

Running 5.02
Bob C