12-02-2018 11:09 PM - edited 12-02-2018 11:15 PM
Hi. I have a Wireless link between two part of site (z1 = zone with accesspoint , z2 = zone with station). beacuse of some geographical issues i have to set another PTP link in z2 with another place (Z3) so i put another access point in Z2 zone and set another Station in Z3 zone (for both sides of zone Z3 i ticked WDS in wireless configuration).
I Had no problem until some days ago that i lost connections of zone 3. when i searched i saw that Z3 access point will lose connection on the switch but when i pluged it directly to laptop (and re connect it to POE) i have access to that Access point. But as soon as i plug the lan to Switch i lose connection again and it wont back even with restart.
I upgraded and downgraded the frameware but it dosent work.
also i used different range of IP Addresses.
I changed the switch.
all switches ARE UNMANAGBLE.
what should i do or check more?
Also the link between Z1 and Z2 is Mikrotik sxt
Also all devices (Nanostation-Powerbeam-litebeam,...) have this same issue on this zone.
12-02-2018 11:29 PM