Highlighted
New Member
Posts: 13
Registered: ‎06-09-2014
Kudos: 4
Solutions: 1
Accepted Solution

Rocket 900M LAN only connects at 10Mbs

I have a Rocket 900M that is only connecting at 10Mbs, its connected to a edgeswitch 8 150W.  It first happened yesterday and I did get it working again by shuting off the port it was connected to and changing the port from auto to 10Mbs Full for a bit than caanged it to 100Mbs half than to 100Mb full. When it came back on it was set to default settings so I had to reconfigure it. It was working fine this morning it was back to only connecting at 10Mbs. And when its at 10Mbs I cannot connet to it at all. I have changed the port it was connected to on the switch but it does not appear to have helped.  


Accepted Solutions
Established Member
Posts: 2,024
Registered: ‎08-16-2010
Kudos: 567
Solutions: 150

Re: Rocket 900M LAN only connects at 10Mbs

Check the  cable/connectors linking the rocket to the edgeswitch.

Defaulting is usually caused by water in the cable and corrosion at the rj45 connectors.

 

View solution in original post


All Replies
Established Member
Posts: 2,024
Registered: ‎08-16-2010
Kudos: 567
Solutions: 150

Re: Rocket 900M LAN only connects at 10Mbs

Check the  cable/connectors linking the rocket to the edgeswitch.

Defaulting is usually caused by water in the cable and corrosion at the rj45 connectors.

 

New Member
Posts: 13
Registered: ‎06-09-2014
Kudos: 4
Solutions: 1

Re: Rocket 900M LAN only connects at 10Mbs

Thanks I cut the end off and it was went inside the cable end. Its working fine now, condensation inside the box was running into the cable end. I changed the box to a better brand to avoid that issue.

 

 

Ubiquiti Employee
Posts: 11,657
Registered: ‎04-14-2017
Kudos: 2166
Solutions: 335

Re: Rocket 900M LAN only connects at 10Mbs

Glad you got this resolved.