New Member
Posts: 15
Registered: ‎09-16-2017

Switch to power Nanostation M2 and Nanostation M2 loco ?

I'm using Nanostation M2loco -->> Nanostation M2 in bridge mode with a AC LR Access Point on the secondary port of the M2.

 

This works well with poe injectors - 24v x 0.5 amp injector for the M2loco and 24v x 1amp for the M2.

 

It would be tider if I could use one of the ubiquiti poe switches though - but do any of them support sending the 1amp required to the M2 so that I can use the secondary port?

 

Thanks.

SuperUser
Posts: 42,794
Registered: ‎06-23-2009
Kudos: 8745
Solutions: 1490

Re: Switch to power Nanostation M2 and Nanostation M2 loco ?

NanoStation M2 and M2 Loco use essentially the

same power. Either will work on 24V 0.5A.  But you

seem to imply something is also plugged into that

secondary port--but don't say what.

 

EdgeSwitch data sheet clearly shows the maximum

power per port; for EdgeSwitch 8-150W is 17W--

which is plenty for your needs.  Dave

 

https://dl.ubnt.com/datasheets/edgemax/EdgeSwitch_DS.pdf

 


> HQ in Seacoast region New Hampshire U.S.A.
> Ubiquiti Certified Trainer [UCT] for:
     UBWA [AirMax] / UEWA [UniFi] / UBRSS [routers]
UBNT.NH@gmail.com
Highlighted
New Member
Posts: 15
Registered: ‎09-16-2017

Re: Switch to power Nanostation M2 and Nanostation M2 loco ?

Its a UAP‑AC‑LR that I have plugged into the secondary port.

Thanks.