11-29-2018 08:15 AM - edited 11-29-2018 08:21 AM
I have a customer who is needing a point to multi point setup. Bandwidth need is greater than 100mbs hopefully. main location to location b is aprox 250 ft. main location to location c is approx 700 ft. All clear line of site. Approx 15 degrees of seperation when looking from main location to both secondary locations. I am planning on also having a rugged poe switch in location c as it will be getting a security camera or two and is a non conditioned space. both the main location and location b will be getting standard poe switches and wireless APs as well.
11-29-2018 09:39 AM
You posted this is in the UniFi Section.
@UBNT-JaM could you move this to AirMAX?
USG-4-PRO • USG
USW-48-500W • USW-24-POE-250W 2x • USW-16-POE-150W 3x • USW-24 • USW-8-150W • USW-8
UAP XG • UAP-SHD • UAP-HD • UAP-NanoHD 2x • UAP-AC-PRO 2x • UAP-AC-LITE • UAP-AC-IW • UAP-AC-M • UAP-AC-M-PRO 2x
UAS-XG • UCK-G2-PLUS • UCK-G2 • UCK
12-03-2018 11:41 AM - edited 12-03-2018 11:44 AM
There is a bit of height difference in the terrain that the sat view doesn't show, but mounting height is in the 8 to 12 ft range. Customer has been advised to remove all tree branches in the line of sight and this spring when we first looked at it, there werent that many tree branch issues anyway. And of course after our discussions this past weekend he has upped his speed request to 200+, or 300+ "if it's not too much".
12-05-2018 12:05 PM
Yes, set up one nanobeam as Access Point PtMP and two more as two Clients in PtmP and you will get a connection if you've aimed correctly and there's not an obvious tree blocking.
12-05-2018 12:13 PM
What I was alluding to was one at the main location, to two different buildings that I am trying to service. At 700 ft does the difference in the Litebeam and nanobeam make a difference?