Reply
New Member
Posts: 8
Registered: ‎03-19-2014
Accepted Solution

Unable to provision mPower Pro

I have setup a few of the other Mfi devices, and now I would like to add a mPower Pro to my Mfi Cloud controller. But when I access the web interface, I must (not like the other Mfi devices) enter an email and password? According to the usermanual I must register at http://mfi.ubnt.com - but that site is down?

 

can anybody help here?


Accepted Solutions
Member
Posts: 266
Registered: ‎08-15-2011
Kudos: 95
Solutions: 13

Re: Unable to provision mPower Pro

[ Edited ]

you must manually ugrade the mfi firmware away from the 2.0.8 or so firmware that it ships with.   That firmware only allows for ubnt cloud which doesn't exist any more.

 

goto http://mfi-ipaddress/upgrade.cgi

Login via ubnt/ubnt

Click and browse to 2.1.4 firmware file. 

Upload and load it.

Wait 5 minutes for it load and reboot.

Log back in via gui, and you will see you can now enter controller info.

 

I could not get the latest 2.1.11 firmware to load manually.  So after I adapot the Pro, the controller loads the latest firmware. 

 

Incase you can't find thier 2.14 firmware, I have it on my web site.  Not sure if I'm allowed to link to it here, so goto the link below which I spaced out.

 

www fusedtech.com /downloads/mfifirmware.2.1.4.zip

 

View solution in original post


All Replies
Member
Posts: 266
Registered: ‎08-15-2011
Kudos: 95
Solutions: 13

Re: Unable to provision mPower Pro

[ Edited ]

you must manually ugrade the mfi firmware away from the 2.0.8 or so firmware that it ships with.   That firmware only allows for ubnt cloud which doesn't exist any more.

 

goto http://mfi-ipaddress/upgrade.cgi

Login via ubnt/ubnt

Click and browse to 2.1.4 firmware file. 

Upload and load it.

Wait 5 minutes for it load and reboot.

Log back in via gui, and you will see you can now enter controller info.

 

I could not get the latest 2.1.11 firmware to load manually.  So after I adapot the Pro, the controller loads the latest firmware. 

 

Incase you can't find thier 2.14 firmware, I have it on my web site.  Not sure if I'm allowed to link to it here, so goto the link below which I spaced out.

 

www fusedtech.com /downloads/mfifirmware.2.1.4.zip

 

New Member
Posts: 8
Registered: ‎03-19-2014

Re: Unable to provision mPower Pro

Ahh, perfect - I will try that. Thanks!

New Member
Posts: 1
Registered: ‎11-13-2017

Re: Unable to provision mPower Pro

I cant launch to get this to work.

 

your links you posted were no good. 

using Chromebrowser

 

Al my other equipment is working great on cloud.

Switch knows its there but no communication ????

 

vicorlando@lvmobilemasters.com 

 

this seemed like agreat idea till this stuff happens..

 

Have phone app also

 

Reply