Airgrid AG-HP-2G16 installation on farm

  • J

    My first experence with Ubiquiti and setting up two AG-HP-2G16's to extend an internet conection has been a complete success. I mounted the equipment and configed it myself. It was very easy and I cant believe I had not come into contact with this type of gear sooner. The distance was about 700 feet through a forest and though certainly not ideal link conditions it seems to be working very well.


  • Beta Testers

    Nice, do you have any screen shots of the main tabs?

  • U

    JLBTech, I'm glad it went so well - and thanks for sharing.

  • J

    I will get some screenshots of the main tabs next time I pick up a share at this farm.

  • D
    Beta Testers

    I think, your feed was mounted in a wrong polarisation. The grid is mounted in vertical polar, but the feed is in horizontal.

    If you change the feed polarization, you get a better signal :)

  • E
    Beta Testers

    Hello!Both ends of the link must be in the same polarity, the airgrid has the advantage of changing polarity to horizontal or vertical, it work better depending on the case.However this badly mounted. For the polarity that has the grid, the ap have that it will stay in the side and the Ethernet output down.With this equipment you can reach 30 mb/s without any problems

  • J

    Thanks for pointing this out ESYTA_NETWORKS and dnyl. We were hasty in putting this equipment up but none the less the link we created seems to be working well. The next time I am at this farm I will correct the problem and take screenshots of the main tabs to see how this effects things.

  • Beta Testers

    the polarization is corrected indicated by the grid and feed horn orientation but it looks like 1 of the grids is upside down.

    this will not affect performance but could significantly shorten the life of the grid if water gets in there but I think this is

    an optical illusion based on the bracket gaps

ag-hp-2g161 Posts 8Views 0
Log in to reply

Looks like your connection to Ubiquiti Networks Community was lost, please wait while we try to reconnect.