5.4.14 Changelog Controller bugfixes/changes from 5.4.12: -Fix bug with websocket not closing properly on site switch (causing devices listed in incorrect site). -Improve header icon design. -Fix issue with controller causing too many directs (controller side fix for UNIFI-457). -Various security improvements Firmware changes from 3.7.47 [UAP] Fix the issue which caused ZH enabled APs to be soft bricked after upgrade to 3.7.47. [UAP] Backport Busybox commit to fix the issue when DHCP search domain started with a number (reported HERE). [USW] Fix a typo affecting some provisioned configurations. Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.49.6201 | md5 UAP-AC-HD | 3.7.49.6201 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.49.6201 | md5 UAP-v2, UAP-LR-v2 | 3.7.49.6201 | md5 UAP-IW | 3.7.49.6201 | md5 UAP-Pro | 3.7.49.6201 | md5 UAP-OD+ | 3.7.49.6201 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.49.6201 | md5 USW | 3.7.49.6201 | md5 US-16-XG | 3.7.49.6201 | md5 USG | 4.3.34.4943823 | md5 USG Pro | 4.3.34.4943827 | md5 -- 5.4.12 Changelog New Features: -WLAN - broadcast/multicast blocking. Controller bugfixes/changes from 5.4.11: -Fix discovering devices on Windows. -Wizard: allow falling back to first available country when US is not in the list. -Fix showing upgrade whiteout notice. -Prevent transition superseded error. -Add training button. -Improve email templates. Elite Controller only: -License state improvement Firmware changes from 3.7.37: [UAPG3] Enable RADIUS VLAN support.* [UAPG3] Enable 802.11w support.** [UAPG3] Enable international DFS support (except US/CA). [UAPG3] Fix spurious reboots of AC-HD. [UAPG1/G2] Fix issue with TX buffer management. Should help with upgrade issues, and WLAN schedule problems due to stuck VAPs with log message `Timeout waiting for vap to stop` (UNIFI-374).*** [UAPG3] Enable MU-MIMO sounding. [UAPG3] Advertise country information element. [UAPG3] Advertise QBSS Load information element. [UAPG3] Update powersave function. [UAPG3] PN replay improvements. [UAPG1] Change default CPU clock to 400MHz for AR724x/QCA933x based UAP. Prevents second harmonic interference at 780MHz. [UAP] Enable DHCP broadcast to unicast conversion, default to off. ** [UAP] Prevent VAPs with a bad config from coming up open. [UAP] Fix a couple issues with current RADIUS VLAN code. [UAP] Enable dropbear DSS support. [USW] Update webRTC terminal client to 1.0.8. [USW] Improve device logging [USW] Add missing FASTPATH command to clear MAC address table (non-XG models). *When using RADIUS VLAN on AC-HD, the active VAPs will not be offloaded, which will cause lower than expected performance. This is being worked on. **Controller support pending to be able to toggle this. ***You may need to 1) set the radios to the disabled WLAN group, and then 2) reboot each UAP to be able to upgrade to this firmware. Once on this firmware, you should have no problems upgrading to newer firmware. Firmware 3.7.45 has been pushed for AC-HD only (at this time). Please see changes HERE. Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.40.6115 | md5 UAP-AC-HD | 3.7.40.6115 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.40.6115 | md5 UAP-v2, UAP-LR-v2 | 3.7.40.6115 | md5 UAP-IW | 3.7.40.6115 | md5 UAP-Pro | 3.7.40.6115 | md5 UAP-OD+ | 3.7.40.6115 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.40.6115 | md5 USW | 3.7.40.6115 | md5 US-16-XG | 3.7.40.6115 | md5 USG | 4.3.34.4943823 | md5 USG Pro | 4.3.34.4943827 | md5 -- 5.4.11 Changelog Controller bugfixes/changes from 5.4.10: -Add Migrate Site (Export Site) Wizard. -Support concurrent L3 device adoption. -Improve dates in statistics page. -Fix slow database backup. -Fix RADIUS profile migration issue. Controller bugfixes/changes ported from 5.5.3 -Add validation for USG/USW SNMP community string. -Enable traffic-control only for supported firmware versions. -Various VPN and routing policy fixes. Elite Controller only: -Add chat_elite tag to chat in Elite Controllers. -Fix discovering devices on Windows machines. Firmware changes from 3.7.35: [UAPG3] Enable tinysnmp. [UAPG3] Enable 802.1x identity support. [UAPG3] Fix RX rate error. [UAP] Fix an issue with wireless uplink connectivity. [UAP] Fix an issue with wireless adoption. [UAP] Fixed issue with random disconnects. [UAP] Fixed issue where stations were improperly getting kicked while roaming subnets. [UAP] Fix open SSIDs on 1st gen AC models. [UAP] Add broadcast filter support.* [UAP] Add rate control framework.* [USW] Fix LED handling when port running at 10/100M on US-8/US-8-60W. *These functions will not work with current controller releases. They will be available in a future release. Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.37.6065 | md5 UAP-AC-HD | 3.7.37.6065 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 |3.7.37.6065 | md5 UAP-v2, UAP-LR-v2 | 3.7.37.6065 | md5 UAP-IW | 3.7.37.6065 | md5 UAP-Pro | 3.7.37.6065 | md5 UAP-OD+ | 3.7.37.6065 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.37.6065 | md5 USW | 3.7.37.6065 | md5 US-16-XG | 3.7.37.6065 | md5 USG | 4.3.34.4943823 | md5 USG Pro | 4.3.34.4943827 | md5 -- 5.4.10 Changelog Controller bugfixes/changes from 5.4.9: -Update port speed availability for 10GBASE-T ports. Elite Controller only: -Handle license registration error on device adopt. -Fix saving Controller Settings for Elite. Firmware changes from 3.7.35: [UAPG3] Enable tinysnmp. [UAPG3] Enable 802.1x identity support. [UAPG3] Fix RX rate error. [UAP] Fix an issue with wireless uplink connectivity. [UAP] Fix an issue with wireless adoption. [UAP] Fixed issue with random disconnects. [UAP] Fixed issue where stations were improperly getting kicked while roaming subnets. [UAP] Fix open SSIDs on 1st gen AC models. [UAP] Add broadcast filter support.* [UAP] Add rate control framework.* [USW] Fix LED handling when port running at 10/100M on US-8/US-8-60W. *These functions will not work with current controller releases. They will be available in a future release. Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.37.6065 | md5 UAP-AC-HD | 3.7.37.6065 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 |3.7.37.6065 | md5 UAP-v2, UAP-LR-v2 | 3.7.37.6065 | md5 UAP-IW | 3.7.37.6065 | md5 UAP-Pro | 3.7.37.6065 | md5 UAP-OD+ | 3.7.37.6065 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.37.6065 | md5 USW | 3.7.37.6065 | md5 US-16-XG | 3.7.37.6065 | md5 USG | 4.3.34.4943823 | md5 USG Pro | 4.3.34.4943827 | md5 — 5.4.9 Changelog Controller bugfixes/changes from 5.4.8: -Improve dynamic Dashboard. -Improve loading DPI statistics. -Improve Topology view. -Improve Image Map performance. -Update translations. -Add Catalan translations . -Fix saving Settings > Controller. -Add user group override notice, client list user group column. -Fix panel expand/collapse icon aliasing. -Added LAG support to AP > Network configuration (AC-HD only). -Add limited amount of LAN DHCP leases notice. -Add minRSSI noise floor notice. -Add expand/collapse icon to device list actions column. -Disallow SVG image type in Maps. -Add progress bar for backup upload. -Fix the issue with the missing configuration tab after using site import/export. Elite Controller only: -Improve discovering devices. -Add support for device licenses. Firmware changes from 3.7.32/4.3.33: [UAPG3] Upgrade ECM code. [UAPG3] Increased TX power to 25dB for all non-DFS channels (where regulations allows). [UAPG3] Various performance tweaks, related to using guest SSIDs, etc. [UAPG3] Add netconsole support. [UAPG3] Temporarily disable HS2.0 as it is currently unsupported. [UAPG2] Speed improvements and bug fixes for spectral scanning. [UAPG1] Fix wireless uplink issue related to driver upgrade. [UAP] Various stability improvements [USW] Remove unsupported PoE mode from US-8. [USW/XG] Enable autoneg for SFP+ ports. [USXG] Fix wrong RX error count. [USG] Back-end update for RADIUS server support in 5.5.1 and newer controller versions. [USG] Added ubnt-netconsole for netconsole logging support. Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.34.5997 | md5 UAP-AC-HD | 3.7.34.5997 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.34.5997 | md5 UAP-v2, UAP-LR-v2 | 3.7.34.5997 | md5 UAP-IW | 3.7.34.5997 | md5 UAP-Pro | 3.7.34.5997 | md5 UAP-OD+ | 3.7.34.5997 | md5 PicoM2 | 3.3.22.4024 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.34.5997 | md5 USW | 3.7.34.5997 | md5 US-16-XG | 3.7.34.5997 | md5 USG | 4.3.34.4943823 | md5 USG Pro | 4.3.34.4943827 | md5 -- 5.4.8 Changelog Controller Bugfixes/Changes ported from 5.5.1: -Add device configuration warning bar with real time input updates. -Make Dashboard widgets configurable. -Update color used for upload and download values. -Rename vpn client to vpn type. -Set next hop for static route as default. -Remove voip option from available networks purposes. -Fix initial value of data retention days. -Add special icons for UCK client. -Performance improvements on Dashboard. -Add beta warning for languages other than English. -Add Turkish translations. -Update translations. -Add Danish, Norwegian and Turkish to the languages supported by Hotspot Portal. -Add button for toggling clients visibility on Topology view. UniFi Elite only: -Fix discovering devices Firmware Changes from 3.7.29: -[UAPG3] Temporarily remove netconsole support as it caused instability. -[UAP] Fix VLAN roaming issue. -[UAP] Fix L3 wireless adoption issue. -[UAP] Fully remove multi-hop support from models that don't support it. -[USW] Add rc.watchdog, has been missing for a while. -[HW] Fix issue with sshd binding to ifname (UNIFI-322). Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.32.5963 | md5 UAP-AC-HD | 3.7.32.5963 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.32.5963 | md5 UAP-v2, UAP-LR-v2 |3.7.32.5963 | md5 UAP-IW | 3.7.32.5963 | md5 UAP-Pro | 3.7.32.5963 | md5 UAP-OD+ | 3.7.32.5963 | md5 PicoM2 | 3.3.22.4024 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.32.5963 | md5 USW | 3.7.32.5963 | md5 US-16-XG | 3.7.32.5963 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.4.7 Changelog Controller Bugfixes/Changes from 5.4.6: -Fix preference panel refresh rate not populating on change. -Improve layout of Switch Statistics view. -Increase width of terminal. -Auto fit too big image when the zoom level is not set on image map. -Set storm control packet minimum to 100. -Fix issue with enabling RADIUS VLAN on wireless. Controller Bugfixes/Changes ported from 5.5.0: -Redesign Zopim Chat. UniFi Elite only: -Fix L3 discovery. Firmware Changes from 3.7.29: -[UAPG3] Temporarily remove netconsole support as it caused instability. -[UAP] Fix VLAN roaming issue. -[UAP] Fix L3 wireless adoption issue. -[UAP] Fully remove multi-hop support from models that don't support it. -[USW] Add rc.watchdog, has been missing for a while. -[HW] Fix issue with sshd binding to ifname (UNIFI-322). Bundled Firmware: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.32.5963 | md5 UAP-AC-HD | 3.7.32.5963 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.32.5963 | md5 UAP-v2, UAP-LR-v2 |3.7.32.5963 | md5 UAP-IW | 3.7.32.5963 | md5 UAP-Pro | 3.7.32.5963 | md5 UAP-OD+ | 3.7.32.5963 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.32.5963 | md5 USW | 3.7.32.5963 | md5 US-16-XG | 3.7.32.5963 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.4.6 Changelog Controller Bugfixes/Changes from 5.4.5: -Performance improvements. -Update translations. -Add Portuguese translations. -Move refresh rate switch to preference panel. -Group Neighboring Access Points by BSSID. -Add password strength check in wizard. -Fix getting most active UAP in Stats/ Quick Look. -Keep displayed start date consistent in Statistics/Recent activities. -Fix dragging items in property panel. -Fix opening property panel from Topology view. -Add Users tab in Switch Property Panel. -Mark aggregated links in Topology view. -Update url when interval is changed in past connections, past guest authorizations list. -Show backend version on login page. UniFI Elite: -Add Wizard. -Add L3 Adoption in Wizard. -Hide auto-backup options in Wizard. Firmware Changes from 3.7.28/4.3.30: -[UAP] Fix memory leak when loading spectral data. -[UAP] Fix bug with stamgr that caused minRSSI (and possibly other functions) to not work as expected. -[USW] Perform ARP snooping on VLAN ARP packets. -[USG] Fix performance regression introduced between 4.3.15 and 4.3.16 releases. -[USG] Update speedtest-cli client and built-in fallback speed test server list. Fixes instances of selecting sub-optimal speed test servers leading to lower than expected results. -[USG] FreeRADIUS back end enhancements for coming controller UI support. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.29.5446 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.29.5446 | md5 UAP-v2, UAP-LR-v2 | 3.7.29.5446 | md5 UAP-IW | 3.7.29.5446 | md5 UAP-Pro | 3.7.29.5446 | md5 UAP-OD+ | 3.7.29.5446 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.29.5446 | md5 USW | 3.7.29.5446 | md5 US-16-XG | 3.7.29.5446 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.4.5 Changelog Controller Bugfixes/Changes from 5.4.4: -Performance improvements on Dashboard and during Refresh. -Improve coverage colors on Map. -Improve ruler on Map. -Change device marker status indicator on Map. -Add copy content to clipboard in Debug Terminal. -Fix getting most active UAP on Stats/Quick Look. -Handle WebSocket connection timeout. -Change AP AC In-Wall details > radio to show "11N/A/AC". -Fix phone properties to use new icon classes. -Fix device list "edit batch" button which was previously hidden. -Enhance default hotspot portal view . -Enhance preferences frame width. -Do not disable Apply button in DPI Settings. -Sort wirelsess uplinks by rssi desc by default. -Fix X axis labels on Stats/Recent Activities. -Fix case filter counters not refreshed after interval changed on Known Clients list. -Update translations. -Handle case when no USG is available on Topology view. Firmware Changes from 3.7.27: -[UAPG2] Add ip package (from iproute2). -[UAP] Re-enable services disabled in 3.7.24. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.28.5442 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.28.5442 | md5 UAP-v2, UAP-LR-v2 | 3.7.28.5442 | md5 UAP-IW | 3.7.28.5442 | md5 UAP-Pro | 3.7.28.5442 | md5 UAP-OD+ | 3.7.28.5442 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.28.5442 | md5 USW | 3.7.28.5442 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.4.4 Changelog Controller Bugfixes/Changes from 5.4.3: -Update translations (CS, DE, ES, NL, PL, ZH). -Add translations (SV). -Allow to provide address-group and port-group in firewall rule. -Add advanced feature toggle to site settings. -Allow edit admins. -Allow assigning roles to administrators. -Allow grating super administrator privileges. -Fix loading map image through WebRTC. -Update image maps to make it work with latest Safari and Firefox. -Show/hide map topology links based on devices visibility. -Move Radius VLAN to Radius Profile. -Discover L3 devices in UniFi GO. -Add topology on maps. -Add automatic uplink failover to site settings. -Dashboard performance improvements. Controller Bugfixes/Changes ported from 5.3.8: -Add Google Map API key entry in Controller settings view. Controller Bugfixes/Changes ported from 5.3.7: -Add "Learn more" link to WLAN form warnings. -Change error message for invalid backup version. -Update chart legends in Switch Stats. -Store and use last selected time interval in Statistics Overview. Controller Bugfixes/Changes ported from 5.3.6: -Add support for Spanish. -Display 0 when no devices found in inventory device carth. -Add Czech, German, Greek, Indonesian to the list of languages supported by Hotspot Portal. -Add dBm to wireless uplink details. -Add throughput warnings to WLAN form. Firmware Changes from 3.7.27: -[UAPG2] Add ip package (from iproute2). -[UAP] Re-enable services disabled in 3.7.24. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.28.5442 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.28.5442 | md5 UAP-v2, UAP-LR-v2 | 3.7.28.5442 | md5 UAP-IW | 3.7.28.5442 | md5 UAP-Pro | 3.7.28.5442 | md5 UAP-OD+ | 3.7.28.5442 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.28.5442 | md5 USW | 3.7.28.5442 | md5 US-16-XG | 3.7.28.5442 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.4.3 Changelog Controller Bugfixes/Changes from 5.4.2: -Fix issue with RADIUS profiles not provisioning. -Deploy proper default route metrics to USG versions >=4.3.30, fixing many multi-WAN issues. Controller Bugfixes/Changes ported from 5.3.5: -Add French to the list of languages supported by Hotspot Portal. -Fix DPI charts. -Update RADIUS password field. -Fix UI version. -Add DFS flag to channel config view. -Fix bps value in voucher list. -Add IP to Admin login event. -Fix positions of tooltips. -Add note to WLAN group legacy support. -Add loading spinner on Insights pages. Firmware Changes from 3.7.20/4.3.24: -[UAP] Fix an issue with memory corruption. -[UAP] Fix various bugs affecting 2.4GHz. -[UAP] Fix various issues with wireless uplink. -[UAP] Update dropbear to 2016.74. -[USW] Fix reboot issue (reported HERE, and probably other locations). -[USG] Fix unexpected reboots related to scheduling while atomic. -[USG] Fix stripping of extraneous quotes from DHCP leases file in clients reporting. If some of your clients in the controller show up as "hostname" rather than hostname, this fixes that. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.24.5422 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.24.5422 | md5 UAP-v2, UAP-LR-v2 | 3.7.24.5422 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.24.5422 | md5 UAP-IW | 3.7.24.5422 | md5 UAP-Pro | 3.7.24.5422 | md5 UAP-OD+ | 3.7.24.5422 | md5 USW | 3.7.24.5422 | md5 US-16-XG | 3.7.24.5422 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.4.2 Changelog New Features: -Add RADIUS Profiles -Add new topology view in maps (Beta) Controller Bugfixes/Changes from 5.4.1: -Show more details in device list radio columns. -Add support for multiple groups in Firewall settings -Improve content of health stats tooltips on Dashboard. -Add confirmation dialog before restoring from autobackup. -Add batch update AP firmware. -Add batch disable AP. -Improve configuration for Hotspot Social Authentication. -Expose redirect HTTPS and redirect HTTPS properties in Guest Control settings. -Add disable option to UAP In-Wall. -Differentiate PoE and PoE+ in switch diagram. -Add support for social transactions in Hotspot Manager. -Remove support for UniFi Phones. -Update list of supported Hotspot languages. -Change Zip to Zip / Postal Code label in hotspot payment fields (for other countries than US). -Improve port PoE capability detection. -Scroll to top when property panel is opened. -Improve terminal (get proper turn credentials). -Improve Insights/Switch Stats (use device dropdown list). Firmware Changes from 3.7.20/4.3.24: -[UAP] Fix memory corruption, which caused memory leak and possibly other issues. -[UAP] Fix minor resource leak. -[UAP] Fix a few issues with wireless uplink. -[UAP] Add DFS for AC-M and AC-M-Pro. -[USW] Disable unsupported power mode on US-8-60W. -[USG] Fix unexpected reboots related to scheduling while atomic. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.22.5399 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.22.5399 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.22.5399 | md5 UAP-IW | 3.7.22.5399 | md5 UAP-Pro | 3.7.22.5399 | md5 UAP-OD+ | 3.7.22.5399 | md5 USW | 3.7.22.5399 | md5 US-16-XG | 3.7.22.5399 | md5 USG | 4.3.25.4923527 | md5 USG-Pro-4 | 4.3.25.4923527 | md5 -- 5.4.1 Changelog Controller Bugfixes/Changes from 5.4.0: -Allow using API only for Angular hotspot authorization. -Hide Facebook and Google authorization for legacy JSP hotspot. -Enable port mirroring for all switch ports. -Fix empty dropdown value on Guest Control languages list. -Change default value for DTIM back to 1. -Add US-16-XG support. Firmware Changes from 3.7.17/4.3.23: -[UAPG2] Enable 802.11r support in hostapd. -[UAPG2] Fix 802.1x Identity, previously did not display. -[UAPG1] Revert update base driver to 10.2. -[UAP] Revert disable CCK rates. -[UAP] Changes to help with connectivity issue while STA roams (reported HERE). -[UAP] Further tweaks to rate control logic. -[UAP] Add support for AC-M/AC-M Pro multi-hop uplink. -[UAP] Fix known issues with wireless uplink. -[USW] Fix issue with jumbo frames not passing through LAG groups. -[USG] Fix unexpected reboots related to scheduling while atomic. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.20.5380 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.20.5380 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.20.5380 | md5 UAP-IW | 3.7.20.5380 | md5 UAP-Pro | 3.7.20.5380 | md5 UAP-OD+ | 3.7.20.5380 | md5 USW | 3.7.20.5380 | md5 US-16-XG | 3.7.20.5380 | md5 USG | 4.3.24.4918432 | md5 USG-Pro-4 | 4.3.24.4918432 | md5 -- 5.4.0 Changelog New Features: -Import/Export Site -Hotspot Portal with Google/Facebook authentication (BETA) Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.23.4913544 | md5 USG-Pro-4 | 4.3.23.4913544 | md5 -- 5.3.11 Changelog Controller Bugfixes/Changes from 5.3.10: -Fix for saving Controller settings (override inform url, live chat, discoverable). -Fix error connection catch context in debug terminal. Firmware Changes from 3.7.29: -[UAPG3] Temporarily remove netconsole support as it caused instability. -[UAP] Fix VLAN roaming issue. -[UAP] Fix L3 wireless adoption issue. -[UAP] Fully remove multi-hop support from models that don't support it. -[USW] Add rc.watchdog, has been missing for a while. -[HW] Fix issue with sshd binding to ifname (UNIFI-322). Bundled Firmware: -UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW | 3.7.32.5963 | md5 -UAP-AC-HD | 3.7.32.5963 | md5 -UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.32.5963 | md5 -UAP-v2, UAP-LR-v2 |3.7.32.5963 | md5 -UAP-IW | 3.7.32.5963 | md5 -UAP-Pro | 3.7.32.5963 | md5 -UAP-OD+ | 3.7.32.5963 | md5 -PicoM2 | 3.3.22.4024 | md5 -UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.32.5963 | md5 -USW | 3.7.32.5963 | md5 -USG | 4.3.33.4936086 | md5 -USG Pro | 4.3.33.4936086 | md5 -- 5.3.10 Changelog Controller Bugfixes/Changes from 5.3.9: -Update translations -Show Controller settings to super admin only -Improve WebSocket connection while using WebRTC -Fix Radius VLAN modes Firmware Changes from 3.7.28/4.3.30: -[UAP] Fix memory leak when loading spectral data. -[UAP] Fix bug with stamgr that caused minRSSI (and possibly other functions) to not work as expected. -[USW] Perform ARP snooping on VLAN ARP packets. -[USG] Fix performance regression introduced between 4.3.15 and 4.3.16 releases. -[USG] Update speedtest-cli client and built-in fallback speed test server list. Fixes instances of selecting sub-optimal speed test servers leading to lower than expected results. -[USG] FreeRADIUS back end enhancements for coming controller UI support. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.29.5446 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.29.5446 | md5 UAP-v2, UAP-LR-v2 | 3.7.29.5446 | md5 UAP-IW | 3.7.29.5446 | md5 UAP-Pro | 3.7.29.5446 | md5 UAP-OD+ | 3.7.29.5446 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.29.5446 | md5 USW | 3.7.29.5446 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.3.9 Changelog Controller Bugfixes/Changes from 5.3.8: -Fix getting most active UAP in Stats/Quick Look. -Remove unsupported PoE mode (24V) from US-8-60W. Firmware Changes from 3.7.28/4.3.30: -[UAP] Fix memory leak when loading spectral data. -[UAP] Fix bug with stamgr that caused minRSSI (and possibly other functions) to not work as expected. -[USW] Perform ARP snooping on VLAN ARP packets. -[USG] Fix performance regression introduced between 4.3.15 and 4.3.16 releases. -[USG] Update speedtest-cli client and built-in fallback speed test server list. Fixes instances of selecting sub-optimal speed test servers leading to lower than expected results. -[USG] FreeRADIUS back end enhancements for coming controller UI support. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.29.5446 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.29.5446 | md5 UAP-v2, UAP-LR-v2 | 3.7.29.5446 | md5 UAP-IW | 3.7.29.5446 | md5 UAP-Pro | 3.7.29.5446 | md5 UAP-OD+ | 3.7.29.5446 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.29.5446 | md5 USW | 3.7.29.5446 | md5 USG | 4.3.33.4936086 | md5 USG Pro | 4.3.33.4936086 | md5 -- 5.3.8 Changelog Controller Bugfixes/Changes from 5.3.7: -Add Google Map API key entry in Controller settings view. Controller Bugfixes/Changes ported from 5.4.4: -Update translations (CS, DE, ES, NL, PL, ZH). -Add translations (SV). -Add advanced feature toggle to site settings. -Fix loading map image through WebRTC. -Update image maps to make it work with latest Safari and Firefox. -Show/hide map topology links based on devices visibility. -Add topology on maps. -Add automatic uplink failover to site settings. Firmware Changes from 3.7.27: -[UAPG2] Add ip package (from iproute2). -[UAP] Re-enable services disabled in 3.7.24. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.28.5442 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.28.5442 | md5 UAP-v2, UAP-LR-v2 | 3.7.28.5442 | md5 UAP-IW | 3.7.28.5442 | md5 UAP-Pro | 3.7.28.5442 | md5 UAP-OD+ | 3.7.28.5442 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.28.5442 | md5 USW | 3.7.28.5442 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.3.7 Changelog Controller Bugfixes/Changes from 5.3.6: -Add option to enable Automatic Uplink Failover (found under Settings>Site>Uplink Connectivity Monitor). -Add "Learn more" link to WLAN form warnings -Change error message for invalid backup version -Update chart legends in Switch Stats -Store and use last selected time interval in Statistics Overview Firmware Changes from 3.7.24: -[UAPG1] Upgrade driver base to 10.2 for QCA models (excludes 1st gen AC). -[UAPG1] Fix issue causing an open SSID when HS2.0 config provisioned to devices which don't support it. -[UAP] Fix issue with previous memory corruption patch. -[UAP] Fix issue which caused EAP authentication to stop working. -[UAP] Fix "peer count exceeds the supported number 136" issue with VAPs using EAP. -[UAP] Decrease uplink failover time. Targeted for AC-M and AC-M-PRO, but may help in other uplink use cases. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU/AC-M/AC-M-PRO | 3.7.27.5440 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.27.5440 | md5 UAP-v2, UAP-LR-v2 | 3.7.27.5440 | md5 UAP-IW | 3.7.27.5440 | md5 UAP-Pro | 3.7.27.5440 | md5 UAP-OD+ | 3.7.27.5440 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.27.5440 | md5 USW | 3.7.27.5440 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.3.6 Changelog Controller Bugfixes/Changes from 5.3.5: -Add support for Spanish. -Display 0 when no devices found in invetory device carth. -Add Czech, German, Greek, Indonesian to the list of languages supported by Hotspot Portal. -Add dBm to wireless uplink details. -Add throughput warnings to WLAN form. Controller Bugfixes/Changes ported from 5.4.3: -Add speedtest interval in Settings -Improve switch stats -Fix scroll to switch port to account for stick title overlap -Show switch fan levels -Add dBm to AP wireless uplinks and downlinks tables -Remove confirm restart "Cycle PoE power" option from non-PoE switches -Updated older APs to use green-ringed icon Firmware Changes from 3.7.22/4.3.25: -[UAP] Fix an issue with memory corruption. -[UAP] Fix various bugs affecting 2.4GHz. -[UAP] Fix various issues with wireless uplink. -[UAP] Update dropbear to 2016.74. -[USW] Fix reboot issue (reported HERE, and probably other locations). -[USG] Fix stripping of extraneous quotes from DHCP leases file in clients reporting. If some of your clients in the controller show up as "hostname" rather than hostname, this fixes that. -[USG] Add proper handling of gateway distances. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.24.5422 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.24.5422 | md5 UAP-v2, UAP-LR-v2 | 3.7.24.5422 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.24.5422 | md5 UAP-IW | 3.7.24.5422 | md5 UAP-Pro | 3.7.24.5422 | md5 UAP-OD+ | 3.7.24.5422 | md5 USW | 3.7.24.5422 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.3.5 Changelog Controller Bugfixes/Changes from 5.3.4: -Add French to the list of languages supported by Hotspot Portal -Fix DPI charts -Update RADIUS password field -Fix UI version -Add DFS flag to channel config view -Fix bps value in voucher list -Add IP to Admin login event -Fix positions of tooltips -Add note to WLAN group legacy support -Add loading spinner on Insights pages -Deploy proper default route metrics to USG versions >=4.3.30, fixing many multi-WAN issues. Controller Bugfixes/Changes ported from 5.4.x: -Fix attaching Google Analytics script in older browsers -Show more details in device list radio columns -Improve content of health stats tooltips on Dashboard -Add confirmation dialog before restoring from autobackup -Improve configuration for Hotspot Social Authentication -Differentiate PoE and PoE+ in switch diagram -Add new topology view in maps (Beta) -Change Zip to Zip / Postal Code label in hotspot payment fields (for other countries than US) -Improve port PoE capability detection -Scroll to top when property panel is opened -Improve Insights/Switch Stats (use device dropdown list) -Allow using API only for Angular hotspot authorization -Enable port mirroring for all switch ports -Fix empty dropdown value on Guest Control languages list -Change default value for DTIM Firmware Changes from 3.7.21/4.3.23: -[UAP] Fix an issue with memory corruption. -[UAP] Fix various bugs affecting 2.4GHz. -[UAP] Fix a few issues with wireless uplink. -[USG] Fix unexpected reboots related to scheduling while atomic. -[USG] Fix stripping of extraneous quotes from DHCP leases file in clients reporting. If some of your clients in the controller show up as "hostname" rather than hostname, this fixes that. -[USG] Add proper handing of gateway distances. Once the controller side comes in a pending release, this fixes many multi-WAN problems. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.23.5410 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.23.5410 | md5 UAP-v2, UAP-LR-v2 | 3.7.23.5410 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.23.5410 | md5 UAP-IW | 3.7.23.5410 | md5 UAP-Pro | 3.7.23.5410 | md5 UAP-OD+ | 3.7.23.5410 | md5 USW | 3.7.23.5410 | md5 USG | 4.3.30.4927105 | md5 USG-Pro-4 | 4.3.30.4927105 | md5 -- 5.3.4 Changelog Controller Bugfixes/Changes from 5.3.3: -Added the ability to define custom switch port diagrams. -Fix aggregated port graphs on switch statistics page. -Fix recent activities on statistics page. -Added disabled device state notification. -Fix access to hotspot manager pages for operators. -Fix running controller as a service on true x64 Windows system. -Upgrade bundled Tomcat to 7.0.70 Firmware Changes from 4.3.21: -[USG] Patch a couple of critical security vulnerabilities. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.8.5016 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.8.5016 | md5 UAP-IW | 3.7.8.5016 | md5 UAP-Pro | 3.7.8.5016 | md5 UAP-OD+ | 3.7.8.5016 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.23.4913544 | md5 USG-Pro-4 | 4.3.23.4913544 | md5 -- 5.3.3 Changelog New Features from 5.3.2: -Added switch statistics page -Added AP config copy -Added AP disable option -Added Beta hotspot 2.0 Controller Bugfixes/Changes from 5.3.2: -Improved batch editing of device config -Fixed special characters in translations -Added preference for disabling websocket -Fixed case when there is no selected map -Added bandwidth info of neighboring AP, and grey out RSSI if too old -Changed property panel adopt icon to blue -Improved stability of WebRTC connections -Added new rfscanning state -Added modal with data retention update -Enabled autobackup during initial setup -Added pt_PT language to hotspot portal -Do not allow read-only users to create vouchers -Added search functionality to site overview modal and full page -Added alert count to site overview pages -Show more than just "Enabled" for WLAN overrides -Renamed state from "Pending approval" to "Pending adoption" -Adopt button in panels use reverse and round action icon style -Show backend version in controller settings -Added performance improvements on device page -Added check device firmware update button to settings Firmware Changes from 3.7.15: -[UAP] Further improvements to mitigate intermittent connectivity conditions. -[UAP] Further improvements to Apple device compatibility. -[UAP] Further improvements to multicast performance/packet success rate (PSR). -[UAP] Fix wireless uplink issue introduced in 3.7.12. -[USW] Add backend support for LLDP-MED. -[USG] Add netconsole support. -[USG] Fixes last_seen issue, where disconnected stations show as wired to USG. -[USG] Adjustments to handling of DHCP events, to mitigate reboots on high traffic sites. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.21.4909458 | md5 USG-Pro-4 | 4.3.21.4909460 | md5 -- 5.3.2 Changelog New Features from 5.3.1: -Added memory usage and load average to AP and switch details -Added the ability to config gateway, switch and AP LED on/off state -Added LED config option to device General config form -Added smart banner for iPhone/iPad devices. Controller Bugfixes/Changes from 5.3.1: -Enabled batch editing -Fixed confirm model for restore backup -Added shorter time filter options for neighboring AP insight. -Fixed INFORM_ERROR state and allow adopting in this state -Fixed http hostname lookup during app load -Setting default autobackup expression to monthly -Toggle size of Map Device Markers -Showing backup file size -Add UK to countries supported by Stripe Firmware Changes from 3.7.10: -[UAP] Various backend changes and optimizations for all models. -[USW] Revert workaround to hide stale STA with age >300s, as it appears to the cause issue reported HERE. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.11.5131 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.11.5131 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.11.5131 | md5 UAP-IW | 3.7.11.5131 | md5 UAP-Pro | 3.7.11.5131 | md5 UAP-OD+ | 3.7.11.5131 | md5 USW | 3.7.11.5131 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.3.1 Changelog Controller Bugfixes/Changes from 5.3.0: -Toggle size of Map Device Markers -Improve labels for radio channel config -Show backup file size -Add UK to countries supported by Stripe Firmware Changes from 3.7.9: -[UAPG2] Fix Ethernet negotiation with AC-Lite/AC-LR. -[UAP] Fix bug with ZH, previously would not work when enabled. -[UAP] Fix support for UAP-IW, which wasn’t working with 3.7.9 firmware. -[UAP] Add missing library to fix netconsole. -[USW] Fix US-8-150W flipped PoE LED after power cycle. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.10.5096 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.10.5096 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.10.5096 | md5 UAP-IW | 3.7.10.5096 | md5 UAP-Pro | 3.7.10.5096 | md5 UAP-OD+ | 3.7.10.5096 | md5 USW | 3.7.10.5096 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.3.0 Changelog New Features from 5.2.2: -Add batch edit of APs. Controller Bugfixes/Changes from 5.2.2: -Improve webrtc connection for debug terminal. -Improve icons in switch diagram. -Improve RF RSSI graph. -Add timezone to cron expressions for auto-backup. -Fix login issue in Safari, when websocket is blocked. -Fix drag&drop for firewall rules. -Fix truncated tooltips in Preferences. -Fix positioning of chart tooltips. -Improve look of checkboxes and radio buttons in Firefox. Firmware Changes from 3.7.8: -[UAPG1] Update base driver to 10.2. -[UAP] Merge all connectivity improvements (see HERE, HERE, HERE, and HERE). -[UAP] Improved SNMP support, and updated TinySNMP library (see HERE). -[UAP] Add netconsole library. -[USW] Fix bug with remote terminal triggering 100% CPU usage. -[USW] Change FASTPATH local telnet access to port 23, and add warning that changes are not persistent. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.9.5089 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.9.5089 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.9.5089 | md5 UAP-IW | 3.7.9.5089 | md5 UAP-Pro | 3.7.9.5089 | md5 UAP-OD+ | 3.7.9.5089 | md5 USW | 3.7.9.5089 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.2.9 Changelog Controller Bugfixes/Changes from 5.2.7: -Fix L3 adoption issue. Firmware Changes from 4.3.21: -[USG] Patch a couple of critical security vulnerabilities. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.8.5016 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.8.5016 | md5 UAP-IW | 3.7.8.5016 | md5 UAP-Pro | 3.7.8.5016 | md5 UAP-OD+ | 3.7.8.5016 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.23.4913544 | md5 USG-Pro-4 | 4.3.23.4913544 | md5 -- 5.2.8 Changelog Controller Bugfixes/Changes from 5.2.7: -Fix L3 adoption issue. Firmware Changes from 4.3.21: -[USG] Patch a couple of critical security vulnerabilities. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.23.4913544 | md5 USG-Pro-4 | 4.3.23.4913544 | md5 -- 5.2.7 Changelog Controller Bugfixes/Changes from 5.2.6: -Fix hotspot operator login Firmware Changes from 3.7.15/4.3.20: -[UAP] Further improvements to mitigate intermittent connectivity conditions. -[UAP] Further improvements to Apple device compatibility. -[UAP] Further improvements to multicast performance/packet success rate (PSR). -[UAP] Fix wireless uplink issue introduced in 3.7.12. -[USW] Add backend support for LLDP-MED. -[USG] Add netconsole support. -[USG] Fixes last_seen issue, where disconnected stations show as wired to USG. -[USG] Adjustments to handling of DHCP events, to mitigate reboots on high traffic sites. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.21.4909458 | md5 USG-Pro-4 | 4.3.21.4909460 | md5 -- 5.2.6 Changelog Controller Bugfixes/Changes from 5.2.5: -Fix special characters in translations Firmware Changes from 3.7.15/4.3.20: -[UAP] Further improvements to mitigate intermittent connectivity conditions. -[UAP] Further improvements to Apple device compatibility. -[UAP] Further improvements to multicast performance/packet success rate (PSR). -[UAP] Fix wireless uplink issue introduced in 3.7.12. -[USW] Add backend support for LLDP-MED. -[USG] Add netconsole support. -[USG] Fixes last_seen issue, where disconnected stations show as wired to USG. -[USG] Adjustments to handling of DHCP events, to mitigate reboots on high traffic sites. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.21.4909458 | md5 USG-Pro-4 | 4.3.21.4909460 | md5 -- 5.2.5 Changelog Controller Bugfixes/Changes from 5.2.4: -Added preference for disabling websocket -Fixed case when there is no selected map -Added bandwidth info of neighboring AP, and grey out RSSI if too old -Changed property panel adopt icon to blue -Improved stability of WebRTC connections -Added new rfscanning state -Added model with data retention update -Enabled autobackup during initial setup -Added pt_PT language to hotspot portal -Do not allow read-only users to create vouchers -Added search functionality to site overview modal and full page -Added alert count to site overview pages -Show more than just "Enabled" for WLAN overrides -Renamed state from "Pending approval" to "Pending adoption" -Adopt button in panels use reverse and round action icon style -Show backend version in controller settings -Added performance improvements on device page -Added check device firmware update button to settings Controller Bugfixes/Changes backported from 5.3.2: -Fixed confirm model for restore backup -Added memory usage and load average to AP and switch details -Added LED config option to device General config form -Added the abililty to config gateway, switch and AP LED on/off state -Added shorter time filter options for neighboring AP insight. -Fixed INFORM_ERROR state and allow adopting in this state -Fixed http hostname lookup during app load -Setting default autobackup expression to monthly -Toggle size of Map Device Markers -Showing backup file size -Add UK to countries supported by Stripe Firmware Changes from 3.7.12/4.3.20: -[UAP] Workaround for Apple Device intermittent connectivity problem. -[UAP] Further fixes to HW/SW retry algorithm. -[UAP] Further improvements to mitigate intermittent connectivity conditions. -[UAP] Further improvements to multicast performance/packet success rate (PSR). -[USW] Add backend support for LLDP-MED. -[USG] Add netconsole support. -[USG] Fixes last_seen issue, where disconnected stations show as wired to USG. -[USG] Adjustments to handling of DHCP events, to mitigate reboots on high traffic sites. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.17.5220 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.7.17.5220 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.17.5220 | md5 UAP-IW | 3.7.17.5220 | md5 UAP-Pro | 3.7.17.5220 | md5 UAP-OD+ | 3.7.17.5220 | md5 USW | 3.7.17.5220 | md5 USG | 4.3.21.4909458 | md5 USG-Pro-4 | 4.3.21.4909460 | md5 -- 5.2.4 Changelog New Features from 5.2.3: -Added memory usage and load average to AP and switch details -Added the ability to config gateway, switch and AP LED on/off state -Added LED config option to device General config form -Added smart banner for iPhone/iPad devices. Controller Bugfixes/Changes from 5.2.3: -Fixed confirm model for restore backup -Added shorter time filter options for neighboring AP insight. -Fixed INFORM_ERROR state and allow adopting in this state -Fixed http hostname lookup during app load -Setting default autobackup expression to monthly -Toggle size of Map Device Markers -Showing backup file size -Add UK to countries supported by Stripe Firmware Changes from 3.7.11: -[UAPG1] Fixed ZH on 1st gen QCA models. -[UAP] Fix for reboots in high interference areas (reported HERE). -[UAP] Fix resource leak from socket call (reported HERE). -[UAP] More backend optimizations. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.12.5154| md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.12.5154 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.12.5154 | md5 UAP-IW | 3.7.12.5154 | md5 UAP-Pro | 3.7.12.5154 | md5 UAP-OD+ | 3.7.12.5154 | md5 USW | 3.7.12.5154 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.2.3 Changelog Controller Bugfixes/Changes from 5.2.2: -Update Debian dependency, to allow Oracle Java (this allows you to remove OpenJDK, if desired. This can save space on CK). -Upgrade WebRTC (backport from 5.3.1). -Fix an issue with MongoDB. Firmware Changes from 3.7.9: -[UAPG2] Fix Ethernet negotiation with AC-Lite/AC-LR. -[UAP] Fix bug with ZH, previously would not work when enabled. -[UAP] Fix support for UAP-IW, which wasn’t working with 3.7.9 firmware. -[UAP] Add missing library to fix netconsole. -[USW] Fix US-8-150W flipped PoE LED after power cycle. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.10.5096 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.10.5096 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.10.5096 | md5 UAP-IW | 3.7.10.5096 | md5 UAP-Pro | 3.7.10.5096 | md5 UAP-OD+ | 3.7.10.5096 | md5 USW | 3.7.10.5096 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.2.2 Changelog Controller Bugfixes/Changes from 5.2.0: -Added mirroring port and WLAN group ZH tooltips. -Transition switch port diagram between PoE and blocking icons. -Split switch icons into PoE into PoE+ and 24V PoE. -Fixed debug terminal connectivity. -Fixed issue with Safari (disabled websocket). Firmware Changes from 3.7.8: -[UAPG1] Update base driver to 10.2. -[UAP] Merge all connectivity improvements (see HERE, HERE, HERE, and HERE). -[UAP] Improved SNMP support, and updated TinySNMP library (see HERE). -[UAP] Add netconsole library. -[USW] Fix bug with remote terminal triggering 100% CPU usage. -[USW] Change FASTPATH local telnet access to port 23, and add warning that changes are not persistent. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.9.5089 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.9.5089 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.9.5089 | md5 UAP-IW | 3.7.9.5089 | md5 UAP-Pro | 3.7.9.5089 | md5 UAP-OD+ | 3.7.9.5089 | md5 USW | 3.7.9.5089 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.2.0 Changelog New Features from 5.1.1: -Added minimum rate control for UAPs Controller Bugfixes/Changes from 5.1.1: -Expose SDN log level. -Added SV and NL languages for hotspot portal. -Added handling of events pushed from backend. -Added TURN support for debug terminal. -Fixed loading of Chinese translations. -Improved RF environment. -Added Polish translations. -Fixed editing image maps. -Added sorting hotspot packages. -Fixed sorting PoE power. -Added RADIUS port for network configuration. -Added sites overview device list. Firmware Changes from 3.7.7/4.3.17: -[UAPG2] Add arp to busybox, previously was missing. -[UAP] Further changes to the HW/SW retry logic. -[UAP] Disable ATF in default config. -[USW] Workaround to hide stale STA with age >300s -[USW] Fix issue with secondary RADIUS accounting server. -[USW] Update firmware base to ES 1.5.0. -[USG] Fix issue with gateway removed on provision with static WAN type. -[USG] Pass some non-offloaded packets to kernel, instead of calling dev_queue_xmit directly (helps with some crashes). -[USG] Improve handling of L4 packets with bad checksum. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.8.5016 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.8.5016 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.8.5016 | md5 UAP-IW | 3.7.8.5016 | md5 UAP-Pro | 3.7.8.5016 | md5 UAP-OD+ | 3.7.8.5016 | md5 USW | 3.7.8.5016 | md5 USG | 4.3.20.4897149 | md5 USG-Pro-4 | 4.3.20.4897158 | md5 -- 5.1.1 Changelog Controller Bugfixes/Changes from 5.1.1: -Add message on Static Routes page if there is no USG -Fix Chinese translations -Fix high CPU usage on dashboard page (remove animations) -Remove minutes option from Auto Backup occurrence settings -Fix Firewall Settings page on webRTC Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.7.4997 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.7.4997 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.7.4997 | md5 UAP-IW | 3.7.7.4997 | md5 UAP-Pro | 3.7.7.4997 | md5 UAP-OD+ | 3.7.7.4997 | md5 USW | 3.7.7.4997 | md5 USG | 4.3.17.4889317 | md5 USG-Pro-4 | 4.3.17.4889320 | md5 -- 5.1.0 Changelog New Features: -Add Static Routes and Firewall rules (beta) in Settings. -Add Auto Backup in Settings. -Add Remember me to login page (extend session timeout to 24h). -Device details: Add Channel Utilization. Controller Bugfixes/Changes from 5.0.8: -Add DPI category/app/client views in Statistics. -Improve Setup Wizard. -Allow overriding angular Hotspot Portal files -Disable Custom Upgrade when Auto Upgrade is on -Fix wrong number of devices in channel occupancy graph on Dashboard -Fix select maps dropdown -Store less, fetch more approach to insights, alerts, events, settings, admins -UI performance improvements -Portal changes -Add configurable list of languages in Hotspot Portal Firmware Changes from 5.0.8: -[UAPG2] Fix Canada country code, so DFS complies with RSS-247. -[UAPG2] Fix rate limiting on non-guest VAP. -[UAPG2] Fix LAN lockup issue with AC-Lite/LR when connected to some 100Mbps switches. -[UAPG2] Guest isolation (ap_bridge) update -[UAP] Change default DTIM to 3, although can be changed via system.cfg (e.g. wireless.X.dtim_period=3). -[UAP] Fix client TX stats showing as double RX stats on 2.4G radio. -[UAP] Allow CCK for 802.11b STA. -[USG] Fix OOM issue, causing frequent reboots for some users. -[USG] Disable SSH on WAN in factory default state. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.7.4997 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.7.4997 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.7.4997 | md5 UAP-IW | 3.7.7.4997 | md5 UAP-Pro | 3.7.7.4997 | md5 UAP-OD+ | 3.7.7.4997 | md5 USW | 3.7.7.4997 | md5 USG | 4.3.17.4889317 | md5 USG-Pro-4 | 4.3.17.4889320 | md5 -- 5.0.8 Changelog Controller Bugfixes/Changes from 5.0.7: -Store less, fetch more approach to networks, site health, known clients and other insights data -Allow admin accounts to login to hotspot as a fallback -Throughput graph: display correct value of avg throughput in download tooltip -Added alias config to configuration of phone property panel -Fixed for printing vouchers over webrtc -Backup settings only without historical data -Updated time filter pre-population to allow value of 0 -Fixed invalid property error on gateway dynamic DNS -Display hotspot overrides upgrade only when new version is available -Changed all instances of "UniFi Gateway" to "UniFi Security Gateway" -Added latency formatting filter -Added warning to confirm modal for upgrade/update -Improved WebRTC handling -Quick Stats: prevent displaying arrows without values -Fixed "view all" for known clients and neighboring APs -Map coordinates stored as floats instead of strings -Added browser warning for non-Chrome/Firefox browsers -Pending changes label more verbose -Added warning before closing all property panels if any docked panels have changes -Fix client uplink sort to account for switch port Firmware Changes from 5.0.7: -[UAPG2] Add DFS support for US/CA. -[UAPG2] Fix a bug with Legacy mode that left it always on, regardless of setting. -[UAP] Some changes related to RADIUS controlled VLANs. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.6.4980 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.6.4980 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.6.4980 | md5 UAP-IW | 3.7.6.4980 | md5 UAP-Pro | 3.7.6.4980 | md5 UAP-OD+ | 3.7.6.4980 | md5 USW | 3.7.6.4980 | md5 USG | 4.3.16.4879270 | md5 USG-Pro-4 | 4.3.16.4879270 | md5 -- 5.0.5 Changelog Controller Bugfixes/Changes from 5.0.4: -Fixing debug terminal for Firefox -Fixed AP ATF pre-population -Fixed tx/rx packet formatting -Simplify picking known client fields -Throughput chart: show both tooltips -DPI UI tweaks -Hide fan level for switches without fans -Added color boxes next to chart legends -Fixed hiding hotspot preview in cloud -Hotspot portal -Payment improvements Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.4.4945 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.4.4945 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.4.4945 | md5 UAP-IW | 3.7.4.4945 | md5 UAP-Pro | 3.7.4.4945 | md5 UAP-OD+ | 3.7.4.4945 | md5 USW | 3.7.4.4945 | md5 USG | 4.3.16.4879270 | md5 USG-Pro-4 | 4.3.16.4879270 | md5 -- 5.0.4 Changelog Controller Bugfixes/Changes from 5.0.3: -Added DPI icons in Client Property DPI view -Added Firefox support for debug terminal -Improved number validation for user groups, network DHCP seconds -Fixed issues in Chrome where select dropdown flashes in property panel -Improved donut charts: add separator between segments -Avoiding loading zopim libs if chat is disabled -Fixed customising vouchers -Added possibility to bypass confirm modal -Added sticky title to property panel -New restart device icon -Hotspot portal -Improvement/use angular window Firmware Changes from 5.0.3: -[UAPG2] Limit bandsteering debug terminal to local host. -[UAPG2] Improve 2G HT40 performance. -[UAP+G2] Numerous rate control fixes. -[UAP+G2] Various backend stability changes. -[UAP+G2] Fixed a couple of memory leaks. -[USG] Revert QUIC bypass patch. -[USG] Revert to spin_lock as export function isn't used on USG. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.4.4945 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.4.4945 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.4.4945 | md5 UAP-IW | 3.7.4.4945 | md5 UAP-Pro | 3.7.4.4945 | md5 UAP-OD+ | 3.7.4.4945 | md5 USW | 3.7.4.4945 | md5 USG | 4.3.16.4879270 | md5 USG-Pro-4 | 4.3.16.4879270 | md5 -- 5.0.3 Changelog Controller Bugfixes/Changes from 5.0.2: -Sites overview refresh and link to sites -Adding Google Analytics to Cloud UI -Improved device state sort -Improved switch diagram port selection -Various maps and speedtest fixes and improvements -Allow SFP ports to choose manual link negotiation -Property panel pending changes dropdown -Various IE fixes -Fixes for Safari issues with dropdowns -Hotspot portal -Wrap welcome text on main page. -Highlight required fields (asterisk). -Fix Stripe Payment by adding second line of address in payment form. -Fix CC expire month field in payment form. Firmware Changes from 5.0.2: -[UAPG2] Fix issue with guest portal not displaying when STA on 5G VAP -[UAPG2] Fix issue with client isolation on guest SSID. -[UAP] Fix a memory leak. -[UAP] A few backend changes. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.3.4925 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.3.4925 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.3.4925 | md5 UAP-IW | 3.7.3.4925 | md5 UAP-Pro | 3.7.3.4925 | md5 UAP-OD+ | 3.7.3.4925 | md5 USW | 3.7.3.4925 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 5.0.2 Changelog Controller Bugfixes/Changes from 5.0.1: -Queue a device's changes and apply all at once -Switch temperature and fan speed added to details -Sites overview -RADIUS assigned VLAN for WLANs -New wired/wireless user/guest icons -Smart Queue QoS -Client DPI stats -Updated AP radio channels dropdown -Insights > Added "all time" option to Known Clients and Neighboring Access Points -Insights > Audio Streams -Adding missing hours field for hotspot packages -24 hour time preference instead of time format preference; added to charts -Remember all refresh rates preference -WebRTC retry modal -Minified components for a smaller file size -Settings > Do not show preview of legacy jsp hotspot portal -Hotspot portal -Display connect button if no authentication or disabled ToS were set Firmware Changes from 5.0.1: -[UAPG2] Resolved remaining issues causing intermittent connectivity. -[UAPG2] Fix throughput issue when ATF enabled. -[UAPG2] Fix an issue with secondary LAN port. -[UAPG2] Fix throughput issue related to LLDP. -[UAP+G2] Minor updates to DVLAN implementation. -[UAP] Fix issue when disabling reset button on UAP-IW -[USG] Fix performance regression from 4.3.13+. -[USG] Fix broken DPI, caused on 4.3.13+. -[USG] Updated glibc modules to patch CVE-2015-7547. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.2.4919 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.2.4919 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.2.4919 | md5 UAP-IW | 3.7.2.4919 | md5 UAP-Pro | 3.7.2.4919 | md5 UAP-OD+ | 3.7.2.4919 | md5 USW | 3.7.2.4919 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 5.0.1 Changelog Bugfixes/Changes from 5.0.0-alpha.2: -Added In-Wall AP property panel -AP RF environment -Switch terminal -Switch 802.1x authentication support -Settings > New hotspot system -Settings > Maintenance > System config -Insights > Port Forward stats -Insights > Dynamic DNS -Insights > Remote User VPN -Maps > Filter 2G and 5G devices -Refresh rate under 2 min doesn't get remembered -Fonts no longer loaded from Google -Power cycle switch ports on reboot -Clients dashboard graph uses OUI data when DPI not available Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.1.4863 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.1.4863 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.1.4863 | md5 UAP-IW | 3.7.1.4863 | md5 UAP-Pro | 3.7.1.4863 | md5 UAP-OD+ | 3.7.1.4863 | md5 USW | 3.7.1.4863 | md5 USG | 4.3.14.4869203 | md5 USG-Pro-4 | 4.3.14.4869209 | md5 -- 5.0.0-alpha.2 Changelog Bugfixes/Changes: -Dashboard updates (and partial DPI implementation) -Dashboard resizes with property panel open/close -Dashboard speed test -Insights > Switch Stats -Insights > Rogue APs renamed to Neighboring APs -Additional client list columns (Channel, PHY mode, Tx/Rx rate) -Custom columns presets (Devices and Switch Stats) -Devices > Rolling upgrade -Devices > APs > Band steering -Devices > APs > Airtime fairness -Devices > APs > WLAN overrides (doesn't save on change, yay) -Devices > Switch > Port config > Storm control -Devices > Gateway > WAN 2 config and load balancing -Settings > Site > VOIP port remap option -Settings > Site > DPI option -Settings > Networks > Corporate | Guest > Network group option -Settings > Networks > VPN Client form -Settings > Networks > Site-to-Site VPN > IPsec VPN & OpenVPN forms -UGW and USW badges for features that require missing hardware -Preferences > Alerts position -Fixed Statistics page over WebRTC -Optimized refresh and change site speed for larger data sets -Last site is remembered -Property panels are dragged by the header now, not the move icon -Removed confirm dialog for AP restart -Advanced options hidden by default (Switch port form, WLAN form) -Most of Amber's bugs and enhancements Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.6.1.3553 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.5.1.4088 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.5.1.4088 | md5 UAP-IW | 3.5.1.4088 | md5 UAP-Pro | 3.5.1.4088 | md5 UAP-OD+ | 3.5.1.4088 | md5 USW | 3.5.1.4088 | md5 USG | 4.3.11.4852825 | md5 USG-Pro-4 | 4.3.11.4852827 | md5 -- 5.0.0-alpha.1 Changelog Bug fixes: -Responsiveness and mobile fixes -iPhone won't zoom on input focus but can still be zoomed manually -Customizable columns -Throughput and latency graphs -Asynchronous list sorting and filtering -Past guest authorizations -User preferences in user dropdown -Light settings theme (user preference toggle) -Alphabetized site list and other dropdowns -Turned off form auto-complete -CSS and Fonts no longer loaded remotely -Wizard saves properly -Timezones fixed -AP radio config no longer reset channel when changing channel width -DHCP server validation doesn't fail if DHCP isn't enabled Known Bugs: -Resettings the settings page will reset any un-saved property panel forms -Clicking outside popover content (on-outside-element-click) won't close the popover content on mobile -Safari event dropdown has a weird overflow+transparency issue -"Disable and remove cloud access" sometimes fails -If dashboard loads with the property panel open and you close the panel the health chart doesn't resize up -Dashboard charts don't scale with property panel open/close -Missing UBNT.com link on dashboard when no APs have been adopted -Statistics page doesn't load over WebRTC -Statistics page responsiveness Missing Features: -Client signal icons -Detailed API errors -Detailed validation errors -Band steering -DPI -Devices > Rolling Upgrade -Devices > Gateway > WAN > Use VLAN ID -Devices > Switch > Services > Spanning Tree -Devices > AP > WLAN overrides -Insights > Switch Stats -Insights > Remote User VPN -Insights > Dynamic DNS -Insights > Port Forward Stats -Settings > Maintenance > System Config Bundled Firmware: USG = 4.3.7.4830709 USG-Pro-4 = 4.3.7.4830712 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.11.3386 Other UAP/USW = 3.3.13.3890 -- 4.9.4 Changelog New Features: -[CTLR] Make many changes, and apply once config style for UAP. -[CTLR] Add web terminal for UAP-AC-Lite, AC-LR, AC-Pro, AC-EDU. -[CTLR] Add backend framework for AC-EDU. -[USW] Add 802.1x support, along with RADIUS VLAN support. Bugfixes/Changes from 4.9.2: -[CTLR] Remove limit on printing vouchers (previously set to 3,000). -[CTLR] Fix issue where guest repeatedly unauthorized. -[UAPG2] Fixes which should prevent intermittent loss of IP connectivity. -[UAPG2] Fix issue with 5G DVLAN. -[UAPG2] Add LLDP support to fix Cisco PoE issue. -[UAPG2] Apply some fixes for spectrum scanning. -[UAPG2] Disable LDP debug server by default (reported HERE, HERE, and HERE). -[UAP-IW] Fix issue with management VLAN. -[UAP] Fix issue with discovery v1 response. -[UAP] Fix memory leak on 1st gen AC (UAP-AC, UAP-AC v2, and UAP-AC-Outdoor). -[UAP] Add LLDP/CDP support to fix Cisco PoE issue. -[UAP] Revert patch for multicast rate issue when 802.11b STA present. -[USW] Make SDP logging less verbose. -[USW] Fix ambiguous fan level for US-16-150W. -[USG] Fix crash in offload which caused unexpected reboots of USG/USG-Pro-4. -[USG] Fix issue with packet corruption when ipv4 offload is enabled. -[USG] Fix NAT leaking issue, causing issues with some sites. -[USG] Fix issue with hotspot redirect, when USG handling redirect instead of UAP (reported HERE). -[USG] Fix issue with SNMP info not being populated. -[USG] Add support for comma separated entries for OpenVPN. -[USG] Fix NAT hairpin when dual WAN enabled. -[USG] Add rule offset when custom firewall/NAT rules in config.gateway.json. -[USG] Fix issue with client rate limiting. -[USG] Fix inform issue with various dual WAN configs. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.7.1.4863 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.7.1.4863 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.7.1.4863 | md5 UAP-IW | 3.7.1.4863 | md5 UAP-Pro | 3.7.1.4863 | md5 UAP-OD+ | 3.7.1.4863 | md5 USW | 3.7.1.4863 | md5 USG | 4.3.14.4869203 | md5 USG-Pro-4 | 4.3.14.4869209 | md5 -- 4.9.2 Changelog New Features: -[UAPG2] Add RADIUS controlled VLAN support (see notes below download links). -[UAPIW] Add Ethernet VLAN tag option. Enable via device properties>configuration>services. This will add ports tab in device properties window. -[UAPIW] Add reset button enable/disable function (device properties>configuration>reset button). -[USW] Add VLAN overview within port configuration. Bugfixes/Changes: -[CTLR] Fix dll injection vulnerability on Windows installer (details HERE). -[CTLR] Hash admin password, this means x_password is no longer used (see notes about this) --plaintext x_password is removed from database. it is replaced by a hashed version x_shadow (salted SHA-512 hash) --https://community.ubnt.com/t5/UniFi-Feature-Requests/Hashing-the-passwords-Do-not-store-in-clear-text/idi-p/680351 -[CTLR] Fix DFS waiting on map. -[CTLR] Prevent device name written in javascript from executing. -[CTLR] ATF and bandsteering now both default disabled on device adoption. bandsteering is default disabled and ATF remains default enabled. There's no change on this. -[UAPG2] Fix RF scan missing DFS channels. -[UAPG2] Add missing channel 144 (region dependent). -[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue. -[UAPG2] Fix wireless uplink VLAN issue. -[UAPG2] Fix rate table init logic. -[UAPG2] Adjustments which should help lessen intermittent connectivity experienced with some devices (reported HERE). -[UAPG2] Bypass netfilter code on non-guest VAPs. Please see known limitations listed HERE. -[UAPG2] Fix issue with ATF on 2G. -[UAP] Code changes to fix mem leak experienced in certain scenarios (reported HERE). -[UAP] Modify bandsteering behaviour to fix issue with some 2G devices. -[UAP] Refined Noise Floor calibration algorithm. -[UAP] Make ntpclient more persistent. -[UAP] Fix bug with WPA-Enterprise on 1st gen AC models. -[UAP] Fix multicast rates, with STA that use older protocols. -[USW] Decrease log verbosity when STP is disabled. -[UGW] Adjust DPI data handling, which is first step to help prevent unexpected reboots. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.6.1.3553 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.5.1.4088 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.5.1.4088 | md5 UAP-IW | 3.5.1.4088 | md5 UAP-Pro | 3.5.1.4088 | md5 UAP-OD+ | 3.5.1.4088 | md5 USW | 3.5.1.4088 | md5 USG | 4.3.11.4852825 | md5 USG-Pro-4 | 4.3.11.4852827 | md5 -- 4.9.1 Changelog New Features: -[CTLR] Add show system config function - simple overview of site configuration. -[CTLR] Add web terminal for USW (Device properties>Configuration>Advanced Config>Debug Terminal) -[UAPG2] Add ATF to UI -[UAPG2] Enable DFS for non US/CA -[USG] Add option for USG to configure VOIP port as WAN2 (Settings>Site>USG Port Remapping) -[USG] Add LAN2 config for USG-Pro-4 -[USG] Add weighted load balance option for dual WAN -[USG] Add VPN clients/site-to-site configs to UI under Settings>Networks. Bugfixes/Changes: -[CTLR] Fix missing bandsteering config for gen2 UAPs. -[CTLR] Fix issue restoring backup in IE. -[CTLR] Add some extra verification to network input. -[CTLR] Add some extra verification to DDNS input. -[CTLR] Fix double provisioning when setting VLAN on WAN. -[UAP] Revise ebtables rules for non-guest SSID. -[UAP] Adjust beacon to fix issue with some devices connecting to 1st gen AC. -[UAP] Fixes for issues with devices connecting to UAP-Pro when bandsteering enabled. -[UAP] Fix some race issues with mcad and uplink-monitor. -[UAP] Add fixes for users able to bypass portal with DNS2TCP. -[UAP] Make ntpclient more persistent. -[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue. -[UAPG2] Fix rate table init logic. -[UAPG2] Fix multicast rates, which was causing some devices (especially using older protocols). -[USG] Fix block user function. -[USG] Add fixes for users able to bypass portal with DNS2TCP. -[USG] Fixes for issues with portal caused by dual WAN. -[USW] Add mass power cycle option to reboot button. Bundled Firmware: USG = 4.3.10.4848577 USG-Pro-4 = 4.3.10.4848776 UAP-AC-Lite/AC-LR/AC-Pro = 3.6.0.3517 Other UAP/USW = 3.5.0.4038 -- 4.8.20 Changelog Bugfixes/Changes from 4.8.19: -[CTLR] Fix Chrome login issue (reported HERE). -[UAP] Fix secondary Ethernet provisioning issue on UAP-OD/OD5/OD+. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.19.3477 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.22.4024 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.22.4024 | md5 UAP-IW | 3.3.22.4024 | md5 UAP-Pro | 3.3.22.4024 | md5 UAP-OD+ | 3.3.22.4024 | md5 USW | 3.3.22.4024 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 4.8.19 Changelog Bugfixes/Changes from 4.8.18: -[CTLR] Fix issue where you can't change admin password (reported HERE). -[UAPG2] Limit bandsteering debug terminal to local host. -[UAP+G2] Rate selection improvements (see HERE (gen1) and HERE (gen2)). Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.19.3477 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.21.4023 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.21.4023 | md5 UAP-IW | 3.3.21.4023 | md5 UAP-Pro | 3.3.21.4023 | md5 UAP-OD+ | 3.3.21.4023 | md5 USW | 3.3.21.4023 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 4.8.18 Changelog Bugfixes/Changes from 4.8.17: -[CTLR] Fix issue with client alias when no USG present on site (reported HERE). Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.18.3464 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.20.4019 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.20.4019 | md5 UAP-IW | 3.3.20.4019 | md5 UAP-Pro | 3.3.20.4019 | md5 UAP-OD+ | 3.3.20.4019 | md5 USW | 3.3.20.4019 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 4.8.17 Changelog Bugfixes/Changes from 4.8.16: -[CTLR] Various controller fixes. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.18.3464 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.20.4019 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.20.4019 | md5 UAP-IW | 3.3.20.4019 | md5 UAP-Pro | 3.3.20.4019 | md5 UAP-OD+ | 3.3.20.4019 | md5 USW | 3.3.20.4019 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 4.8.16 Changelog New Features: -[CTLR] Add framework for UAP-AC-EDU playback --Note, this is playback only. Scheduling will be added in a future release. Bugfixes/Changes from 4.8.15: -[UAPG2] Resolved remaining issues causing intermittent connectivity. -[USG] Fix performance regression from 4.3.13+. -[USG] Fix broken DPI, caused on 4.3.13+. -[USG] Updated glibc modules to patch CVE-2015-7547. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.18.3464 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.20.4019 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.20.4019 | md5 UAP-IW | 3.3.20.4019 | md5 UAP-Pro | 3.3.20.4019 | md5 UAP-OD+ | 3.3.20.4019 | md5 USW | 3.3.20.4019 | md5 USG | 4.3.15.4872672 | md5 USG-Pro-4 | 4.3.15.4872675 | md5 -- 4.8.15 Changelog Bugfixes/Changes: -[UAPG2] Fixes which should prevent intermittent loss of IP connectivity. -[UAP] Fix issue with discovery v1 response. -[UAP] Fix multicast rate issue when 802.11b STA present. -[USG] Fix crash in offload which caused unexpected reboots of USG/USG-Pro-4. -[USG] Updated glibc modules to patch CVE-2015-7547. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.17.3440 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.20.4019 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.20.4019 | md5 UAP-IW | 3.3.20.4019 | md5 UAP-Pro | 3.3.20.4019 | md5 UAP-OD+ | 3.3.20.4019 | md5 USW | 3.3.20.4019 | md5 USG | 4.3.12.4858349 | md5 USG-Pro-4 | 4.3.12.4858351 | md5 -- UniFi 4.8.14 RC2 is released to beta Bugfixes/Changes: -[CTLR] Version checking fixes for Windows installer. Bundled Firmware: UAP-AC-Lite/AC-LR/AC-Pro/AC-EDU | 3.4.16.3435 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5, PicoM2 | 3.3.19.4015 | md5 UAP-AC, UAP-AC v2, UAP-AC-OD | 3.3.19.4015 | md5 UAP-IW | 3.3.19.4015 | md5 UAP-Pro | 3.3.19.4015 | md5 UAP-OD+ | 3.3.19.4015 | md5 USW | 3.3.19.4015 | md5 USG | 4.3.11.4852825 | md5 USG-Pro-4 | 4.3.11.4852827 | md5 -- UniFi 4.8.14 RC is released to Beta Bugfixes/Changes: -[CTLR] Fix hotspot operator able to change sites after login. -[CTLR] Fix error displayed when enabling cloud access without internet access. -[CTLR] Show webrtc state in controller UI. -[CTLR] Fix dll injection vulnerability on Windows installer (details HERE). -[CTLR] USG and USG-Pro-4 firmware now hosted on our CDN, instead of bundled with controller. -[CTLR] Fix login error, under certain situations, with some web browsers running on Windows. -[CTLR] Fix missing port forward stats. -[CTLR] Prevent URL redirect to external site. -[CTLR] Fix USW locate button behavior. -[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue. -[UAPG2] Fix rate table init logic. -[UAPG2] Fix multicast rates, which was causing issues with some devices. -[UAPG2] Adjustments which should help lessen intermittent connectivity experienced with some devices (reported HERE). -[UAP] Code changes to fix mem leak experienced in certain scenarios (reported HERE). -[UAP] Modify bandsteering behaviour to fix issue with some 2G devices. -[UAP] Refined Noise Floor calibration algorithm. -[UAP] Make ntpclient more persistent. -[UAP] Fix bug with WPA-Enterprise on 1st gen AC models. -[USW] Decrease log verbosity when STP is disabled. -[UGW] Adjust DPI data handling, which is first step to help prevent unexpected reboots. Bundled Firmware: USG = 4.3.11.4852825 USG-Pro-4 = 4.3.11.4852827 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.16.3435 Other UAP/USW = 3.3.19.4015 -- UniFi 4.9.1 alpha is released for testing New Features: -[CTLR] Add show system config function - simple overview of site configuration. -[CTLR] Add web terminal for USW (Device properties>Configuration>Advanced Config>Debug Terminal) -[UAPG2] Add ATF to UI -[UAPG2] Enable DFS for approved countries (US/CA Not approved yet) -[USG] Add option for USG to configure VOIP port as WAN2 (Settings>Site>USG Port Remapping) -[USG] Add LAN2 config for USG-Pro-4 -[USG] Add weighted load balance option for dual WAN -[USG] Add VPN clients/site-to-site configs to UI under Settings>Networks. Bugfixes/Changes: -[CTLR] Fix missing bandsteering config for gen2 UAPs (reported HERE). -[CTLR] Fix issue restoring backup in IE. -[CTLR] Add some extra verification to network input. -[CTLR] Add some extra verification to DDNS input. -[CTLR] Fix double provisioning when setting VLAN on WAN. -[UAP] Revise ebtables rules for non-guest SSID. -[UAP] Adjust beacon to fix issue with some devices connecting to 1st gen AC. -[UAP] Fixes for issues with devices connecting to UAP-Pro when bandsteering enabled (reported HERE). -[UAP] Fix some race issues with mcad and uplink-monitor. -[UAP] Make ntpclient more persistent. -[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue. -[UAPG2] Fix rate table init logic. -[UAPG2] Fix multicast rates, which was causing issues with some devices (especially using older protocols). -[USG] Fix block user function. -[USG] Fixes for issues with portal caused by dual WAN. -[USW] Add mass power cycle option to reboot button. Bundled Firmware: USG = 4.3.10.4848577 USG-Pro-4 = 4.3.10.4848776 UAP-AC-Lite/AC-LR/AC-Pro = 3.6.0.3517 Other UAP/USW = 3.5.0.4038 -- UniFi 4.8.12 RC is released to beta Bugfixes/Changes: -[CTLR] Fix USG config bug when using PPPoE for WAN. -[CTLR] Fixes for USG DDNS configuration. -[CTLR] Adjustments to Google Map to match their recent changes. -[CTLR] Fix missing refresh rate for Hotspot Manager. -[CTLR] Fix 403 error when loading payment.html, when portal is HTTP. -[UAP] Further improvements to firmware upgrade process, to fix some lingering upgrade issues. -[UAP] Remove extra reboot during firmware upgrade process on some 1st gen models. -[UAPG2] Add BGA filter to all operational modes | Fix for wireless uplink from G2 AC to G2 AC which may cause STP block in some scenarios. -[UAPG2] Keep VLAN tag for WDS VAP | Fix VLAN problem on wireless uplink. -[UAPG2] Adjust multicast behavior. This should help with remaining multicast issues with some printers, Chromecasts, etc. -[UAPG2] Adjustments to fix a memory leak. -[UAPG2] Fix disable TBTT2 interrupt when active AP vap exists, should resolve THIS reported issue and other issues with WLAN scheduling with multiple WLANs enabled per AP. -[UAPG2] Fix MCS rate control for 5GHz which may solve intermittent connectivity issues. -[USG] Fix erratic browsing when 2 WANs active (reported HERE). -[HW] Adjust logic after firmware update to help ensure that the UniFi device returns in a good state. -[HW] Minimize downtime of syslogd | Improve debugging granularity. Bundled Firmware: USG = 4.3.9.4843893 USG-Pro-4 = 4.3.9.4843895 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.14.3413 Other UAP/USW = 3.3.17.3991 -- UniFi 4.8.10 RC is released to beta Bugfixes/Changes: -[CTLR] Fix Chrome login issue -[UAP] Potentially fixed random disconnect from CTLR. OOM bug remains for certain models/users, please contact or continue discussion in respective thread. -[HW] Increased robustness of firmware upgrade process Bundled Firmware: USG = 4.3.7.4830709 USG-Pro-4 = 4.3.7.4830712 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.12.3392 Other UAP/USW = 3.3.15.3976 -- UniFi 4.8.9 Beta is released to beta Bugfixes/Changes: -[CTLR] Fix issue with hotspot operator login. -[UAP] Several changes to increase robustness of flash process. Bundled Firmware: USG = 4.3.7.4830709 USG-Pro-4 = 4.3.7.4830712 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.11.3386 Other UAP/USW = 3.3.14.3972 -- UniFi 4.8.8 RC2 is released Bugfixes/Changes: -[CTLR] 24/7/365 chat widget now can be controlled - enabled for super user only, all users, or disabled for all. -[CTLR] Fix some minor UI bugs related to USG-Pro-4 properties window. -[CTLR] Fix wrong duplex value set for SFP/SFP+ port on UniFi Switch. -[UAP] Fix various stability issues with 1st gen UAPs (reported HERE). -[UAP] Various regulatory changes. -[UAPG2] Increase U-NII-1 TX power. -[UAPG2] Fix disconnect issues for device resuming from power save state, e.g. mobiles, Nest devices, IoT devices and more (reported HERE). -[UAPG2] Fix multicast related issues reported with some devices like Brother printers, Chromecast devices, and more. -[UAPG2] Fix instability for some 2.4GHz devices when bandsteering enabled (i.e. mFi devices, and more) (reported HERE). -[USW] Fix manual negotiation on SFP+ port with US48P when device is restarted (reported HERE). Bundled Firmware: USG = 4.3.7.4830709 USG-Pro-4 = 4.3.7.4830712 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.11.3386 Other UAP/USW = 3.3.13.3890 -- UniFi 4.8.7 RC is released New Features: -[CTLR] 24/7/365 live chat support widget added to controller UI. -[CTLR] Add support for UAP-AC-EDU. -[CTLR] Add support for USG-Pro-4. -[CTLR] Add support for USW-8-150W. Bugfixes/Changes: -[UAP] Minor backend firmware change for 2nd gen AC models. -[USG] Improve OS detection of DPI function. -[USG] Fix bug with remote user VPN IP pool. -[CTLR] Adjust so DPI data is cleared on USG reboot -[CTLR] Various adjustments and fixes regarding read only admins. Bundled Firmware: USG = 4.3.7.4830709 USG-Pro-4 = 4.3.7.4830712 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.10.3347 Other UAP/USW = 3.3.12.3861 -- UniFi 4.8.6 beta is released New Features: -[USG] Add VLAN support for USG WAN port. Bugfixes/Changes: -[USG] Fixed IPSec site-to-site VPN -[CTLR] Fix storm control input value. -[CTLR] Fix error setting 10Gbps manual negotiation on USW-48. -[CTLR] Fix changing switch port properties affecting all other switches' properties. -[CTLR] Fix bug that allowed user to create multiple DDNS with the same service. -[CTLR] Fix error when clicking switch port diagram. -[CTLR] USG properties now opens to details. -[CTLR] Fix UI error when changing storm control value. -[CTLR] Fix Santiago time zone label. -[CTLR] Fix payload error due to null value. -[CTLR] Fix USW port mirroring error message. -[CTLR] Fix bug when changing USW port properties, it would automatically go back to ports list. Bundled Firmware: USG = 4.3.6.4828078 UAP-AC-Lite/AC-LR/AC-Pro = 3.4.9.3346 Other UAP/USW = 3.3.12.3861 -- UniFi - 4.8.5 - alpha released for soaking New Features: -[UAP] Enable bandsteering for 2nd gen AC UAPs. -[USG] Added DPI functionality, enabled under Settings>Site>DPI (screenshots HERE, HERE, and HERE). DPI is disabled by default. -[USW] Added storm control, configurable under Advanced Options, on a per port basis (screenshot HERE). -[USW] Added IGMP snooping, which is configurable under Settings>Networks (screenshot HERE). Bugfixes/Changes: -[UAP] Improved bandsteering stability on UAP-Pro (partial 802.11v implementation). -[UAP] Various performance and stability improvements for 2nd gen AC UAPs. -[USG] Fix crash caused by some UDP packets (reported HERE). -[USG] Fix block user function. -[CTLR] Update Java bundled in Mac pkg to 8u65b17 -[CTLR] Fixed CVE-2011-1473 (requires Java 8) and default to 2048 bits strength ephemeral DH keys (requires jre7u85 or later) (reported HERE). -[CTLR] Incorrect traffic statistics + may show usage while scheduled SSID is offline (reported HERE, HERE,HERE, and HERE). -[CTLR] Removed VOIP from Dashboard. -[CTLR] Login error doesn't redirect to cloud dashboard. -[CTLR] Error on Reset Cloud Key. -[CTLR] MinRSSI textbox enabled on refresh. -[CTLR] Improved cloud connection handling time. -[CTLR] Cloud Key operations saves form settings. -[CTLR] "Reset CloudKey" confirm dialog. -[CTLR] Statistics site traffic lower than AP traffic. -[CTLR] Clarify Usage of "Historical Data Retention" Setting under Maintenance (reported HERE). -[CTLR] Group interference detection events. -[CTLR] UI Setttings -> Maintenance -> APPLY throws error (reported HERE). -[CTLR] Fix editing multiple switch ports. -[CTLR] Fix "PSK cannot be empty" error when applying WLAN override. -[CTLR] Fix handling of invalid storm control values. -[CTLR] Fix USG inform URL handling. Bundled Firmware USG = 4.3.5.4821689 UAP-AC-Lite/UAP-AC-LR =3.4.9.3346 Other UAP/USW = 3.3.12.3861 -- UniFi - 4.8.3 - Alpha New Features: -[CTLR] Added "Custom Upgrade" on GUI Changes/Bugfixes: -[CTLR] libssl1.0.0 workaround for *nix systems that use UniFi.unix.zip, so controller will run at the expense of cloud/SSO functionality. -[CTLR] Inform url override should work as expected now. -[CTLR] Fixed a bug that re-adopt stop working when controller is moved to a different IP (reported HERE). -[CTLR] Pending Approval/Managed by Other devices will be excluded in Statistic/Current Usage. -[CTLR] Allow SFP port to be set to manual 1000 FDX mode. This fixes the link issue with SFP+ port running on manual mode. -[CTLR] Fixed channel/txpower are gone in AP property view when the last WLAN is disabled by WLAN scheduler. -[CTLR] WLAN override will no longer accept override PSK with empty string. -[CTLR] Numbers of unread alerts in cloud dashboard is no longer capped by 3000. -[CTLR] Fixed a bug that causes incorrect startup message being shown in Launcher UI. -[CTLR] [USG] Update timezone information for Europe/Moscow and Asia/Ulaanbaatar (reported HERE and HERE). -[CTLR] [UAP] Disabled bandsteering/wireless uplink features on UAP-AC/UAP-ACv2/UAP-AC-Outdoor. -[UAP] Fixed guest portal redirection on SSIDs with special characters (reported HERE). -[UAP] Fixed a bug that radius Accounting-STOP messages were incorrectly skipped even if zero-handoff is not used (reported HERE) -[USG] Fixed Site-to-site VPN -[USW] Fixed DHCP guarding on Link Aggregation -[USW] Fixed a bug that switch cannot boot after upgrading to 3.3.10 (reported HERE). -[USW] Fixed a bug that 802.3af/at auto sensing PoE is not working on port 25-48 on US48P-500/US48P-750 when the system is cold rebooted (reported HERE). Bundled Firmware USG = 4.3.4.4815454 UAP-AC-Lite/UAP-AC-LR = 3.4.8.3291 Other UAP/USW = 3.3.11.3850 -- UniFi - 4.8.2 - Alpha Released New Features: -[CTLR] Added Min. RSSI on GUI (see HERE) -[CTLR] Added inform url override on GUI (see HERE) -[CTLR] Extend upgrading pending device feature. Now it works for UAP/USW/USG. -[CTLR] Added port isolation (protected ports) to switch port config. This removes auto isolation (isolates any switch port that participate only native guest network). Bugfixes: -[CTLR] Upgraded Tomcat to 7.0.64. -[CTLR] Fixed UVP auto firmware update check (broken in 4.8.1) -[CTLR] "Delete Site" button is now hidden for administrator -[CTLR] Fixed a bug that causes redundant radio_table updates -[USG] Upgraded base system to Debian wheezy. -[UAP] Improved 2G stability on UAP-AC-Lite/UAP-AC-LR/UAP-AC-Pro -[UAP] Improved spectrum analysis algorithm on UAP-AC-Lite/UAP-AC-LR/UAP-AC-Pro Bundled Firmware USG = 4.3.3 UAP-AC-Lite/UAP-AC-LR = 3.4.8 Other UAP/USW = 3.3.10 -- UniFi 4.7.6 hotfix release Changes from 4.7.5 to 4.7.6: -[CTLR] Upgraded Tomcat to 7.0.64 (current). -[CTLR] Fixed CVE-2011-1473 (requires Java 8) and default to 2048 bits strength ephemeral DH keys (requires jre7u85 or later) (reported HERE). -[UAP] Improved 2G stability on UAP-AC-Lite/UAP-AC-LR/UAP-AC-Pro. -[USW] Fixed DHCP guarding on Link Aggregation. -[USW] Fixed a bug that switch cannot boot after upgrading to 3.3.10 (reported HERE). -[USW] Fixed a bug that 802.3af/at auto sensing PoE is not working on port 25-48 on US48P-500/US48P-750 when the system is cold rebooted (reported HERE). -- UniFi 4.7.5 is released New Features: -[CTLR] Add support for 2nd generation AC UAPs (AC-Lite/AC-LR/AC-Pro) -[CTLR] Free Trial lockout period is now configurable for Hotspot/Payment Portal (see HERE) -[CTLR] Filters settings for Device/Client index view will be remembered now (see HERE) -[CTLR] Admins/Hotspot Operators can now create vouchers with bandwidth/byte quota limits with Hotspot console (see HERE, HERE and HERE) -[CTLR] bundled Java with MacOS X release, which should alleviate Java issues on 10.10 and later releases. Support notes have been updated -[UAP] Enabled spectrum analysis feature for 2nd generation AC UAPs (AC-Lite/AC-LR/AC-Pro) -[USW] Added Clear Counter in Insight Page -[USW] Added SFP module info/system temperature/fan speed to switch property view. -[USG] Added Port Forwarding Stats Insights page -[USG] Added "Terminate" action to Remote User VPN Insights page -[USG] Added more DHCP options (DNS, WINS, lease time) Feature Changes: -[CTLR/USG] Removed PBX support (see HERE) -[CTLR] Default WPA-PSK security mode changed to WPA2 Only/AES Only -[CTLR] Extend MGMT VLAN options to all local networks in Switch property view (see HERE) Changes from 4.6.6 to 4.7.5: -[USW] Fixed a bug that incorrectly report 10M ethernet link as 100M -[USW] Fixed missing DHCP option 43 support -[USG] Allow modifying USG DNS/forwarding/options with config.gateway.json (see HERE) -[USG] Fixed speedtest cannot start upload test with certain speedtest servers -[CTLR] Fixed IP/Subnet validation for Wired Network by updating network/broadcast address validation -[CTLR] Fixed several search/sorting not working issues in UI. Please kindly let us know if you find any column that's not sorting correctly -[CTLR] Fixed a Client name synchronization issue in UI -[CTLR] Fixed a rendering bug in AP EIRP value -[CTLR] Prevent Second USG being adopted to a site using advanced adoption -[CTLR] Update import db help text in Launcher UI -[CTLR] Fixed a bug that provisions invalid SIP Authorization ID to UniFi Phone -[CTLR] Fixed sorting in Device view -[CTLR] Maps will be sorted alphabetically (see HERE) -[CTLR] Added number of clients per AP on clients tab filter. Also added numbers of clients per Network to wired client view (see HERE) -[CTLR] Fixed User/Guest count on map USG details -[CTLR] [USW] UniFi Switches will use SNMP community name in Setting/Site (see HERE) -[CTLR] Revised Insight/Known Client filters -[CTLR] Controller will no longer show wireless pending approval devices when connectivity monitor is disabled in current site -[CTLR] Link Aggregations will now apply VLAN config correctly (see HERE and HERE) -[CTLR] "Archive All" will archive all unarchived alerts (previously it can only archive the first 3,000 unarchived alerts) -[CTLR] Prevent guest bypassing acceptance of the ToU using visual keyboard (see HERE) -[CTLR] Revised Client Property view -[CTLR] Controller will no longer show "Please upgrade all the downlink APs first." error when connectivity monitor is disabled (see HERE) -[CTLR] Added missing (un)authorize buttons for wired guests -[CTLR] Added missing icon for wired client event -[CTLR] Update ssh port used in advanced adoption for UVPs -[CTLR] Update switch topology discovery algorithm -[CTLR] Prevent unnecessary provisioning when inform_ip/inform_url changes -[CTLR] Fixed device upgrade when inform port is remapped by firewall (ex: tcp:80 to tcp:8080) -[CTLR] Update link to IPPay test account -[CTLR] Available channels for zero-handoff WLAN Group are now based on country code -[CTLR] Fixed a bug that allows users to modify zero-handoff band -[CTLR] Update UI minify tools and fixed page loading problem on some browser -[CTLR] Fixed L2 discovery is not working when the default network interface is IPv6 only interface -[CTLR] Deleting a WLAN group will now set affected AP radios to Off WLAN group and remove corresponding overrides. This fixed the "cannot edit override" problem caused by invalid overrides -[CTLR] Fixed a bug that user cannot modify device config if the device has been moved to another site (see HERE) -[CTLR] Fixed a bug that still enabled rate limiting module even if it's not needed (see HERE) -[CTLR] Switch drop-down in Insight->Switch stats is alphabetically sorted -[CTLR] [USW] Allow SFP+ port to be set to manual 1 Gbps (see HERE) -- UniFi - 4.7.4 is Released for Soaking New Features: UniFi Controller + UniFi AP -Enabled Wireless Uplink feature on all models. -Enabled Band Steering feature for all AP models except New AC series. It's configurable in AP property view. UniFi Controller + UniFi Security Gateway -Added Port Forwarding Stats Insights page. -Added "Terminate" action to Remote User VPN Insights page. UniFi Controller + UniFi Switch -Added "Clear Counter" to Switch Stats Insight Page. -Added SFP module info/system temperature/fan speed to switch property view. UniFi Controller -Free Trial lockout period is now configurable for Hotspot/Payment Portal. Reported here. -Filters settings for Device/Client index view will be remembered now. Reported here. -Admins/Hotspot Operators can now create vouchers with bandwidth/byte quota limits with Hotspot console. Reported here, here and here. Please note currently the byte quota is per session. -DHCP options (name servers, WINS servers, lease time) are now configurable in Settings->Network panel. Feature Change: UniFi Controller + UniFi Security Gateway -Shutdown USG PBX support. See here. UniFi Controller -Extend MGMT VLAN options to all local networks in Switch property view. -Default WPA-PSK security mode changed to WPA2 Only/AES Only. Known Limitations -Zero-handoff/Bandsteering are not supported on New AC series. Changes in 4.7.4 -UniFi Security Gateway -Allow modifying USG DNS/forwarding/options with config.gateway.json. Reported here. -Fixed speedtest cannot start upload test with certain speedtest servers. -UniFi Controller + UniFi Switch -Allow SFP+ port to be set to manual 1 Gbps. Reported here. -UniFi Switches will use SNMP community name in Setting/Site. Reported here. UniFi Switch -Fixed missing DHCP option 43 support. -Fixed customized STUN port (defined in system.properties). -Minor improvement on fast provision. UniFi AP -Fixed a bug that a UAP-AC/UAP-ACv2/UAP-AC-Outdoor was listed as clients (3.3.9). Reported here. -Improved performance/stability on New AC series (3.4.4). -Improved wireless uplink stability on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series. -Fixed customized STUN port on all AP models except New AC series. -WLAN schedule will be updated correctly on re-provision. -Minor improvement on fast provision. -UniFi Controller -Fixed OSX Installer on a brand new OSX system (4.7.3). Reported here. -Fixed a bug that user cannot modify device config if the device has been moved to another site. Reported here, and here. -Fixed bandsteering config issue with some WLAN overrides (4.7.3). -Fixed a bug that still enabled rate limiting module even if it's not needed. Reported here. -Switch drop-down in Insight->Switch stats will be sorted alphabetically. -Fixed IP/Subnet validation for Wired Network by updating network/broadcast addresses validation. -Fixed several search/sorting not working issues in UI. -Fixed a Client name synchronization issue in UI. -Fixed rendering bug in AP EIRP value. -Prevent second USG being adopted to a site using advanced adoption. -Update help text for importing database in Launcher UI. -Include JRE 8 in Mac package. Reported here. -Fixed a bug that provisions invalid SIP Authorization ID to UniFi Phone. -Fixed User/Guest count on map USG details. -Added number of clients per AP on clients tab filter. Also added numbers of clients per Network to wired client view. Reported here. -Maps will be sorted alphabetically. Reported here. -Controller will no longer show wireless pending approval devices when connectivity monitor is disabled in current site. -Controller will no longer show "Please upgrade all the downlink APs first." error when connectivity monitor is disabled. Reported here. -Link Aggregations will now apply VLAN config correctly. Reported here and here. -"Archive All" will archive all unarchived alerts (previously it can only archive the first 3,000 unarchived alerts). -Prevent guest bypassing acceptance of the ToU using visual keyboard. Reported here. -Updated ssh port used in advanced adoption for UniFi Phones. -Updated switch topology discovery algorithm. -Prevent unnecessary provisioning when inform_ip/inform_url changes. -Fixed L3 device upgrade when inform port is remapped by firewall (ex: tcp:80 to tcp:8080). -Updated link to IPPay test account. -Revised Insight/Known Client filters. -Revised Client Property view. -Added missing (un)authorize buttons for wired guests. -Added missing icon for wired client event. -Available channels for zero-handoff WLAN Group are now based on country code. -Fixed a bug that allows users to modify zero-handoff band. -Update UI minify tools and fixed page loading problem on some browser.. -Fixed L2 discovery is not working when the default network interface is IPv6 only interface. -Deleting a WLAN group will now set affected AP radios to Off WLAN group and remove corresponding overrides. This fixed the "cannot edit override" problem caused by invalid overrides. -- UniFi 4.6.6 is released New Features: UniFi Controller -UniFi Switch port duplex/speed are now configurable. Reported here. -Added 2G/5G toggle to map coverage view. -Added Copy Config option in switch dialog. Reported here. UniFi Controller + UniFi Security Gateway -Added Insights page for Remote User VPN. -Added Dynamic DNS configuration and Insights page. Feature Change: -UniFi Controller -DHCP Guarding can be configured separately now and is defaulted to disabled. Changes from 4.6.3 to 4.6.6 UniFi Controller -Add auto phone firmware upgrade option (per-site settings). -Support DEBUG level syslog logging. -Check (and optionally cache) phones app upgrades from CDN. -Add check button in Settings-Controller for checking UVP upgrades from CDN. -OUI table updated. -Verified admin can no longer be re-invited. -When an existing admin is invited to a new site, no password update is required. -Fixed issue with revoked admins maintaining partial access in existing logged in session. -When updating admin's email, change is rejected if that email is pending verification. -Insight/Switch-Stats Overview, POE column is now un-sortable. Reported here. -Fixed unable to set SFP/SFP+ ports to aggregate. Reported here. -User/guest filter in client view now works when browser language is Simplified Chinese. -Controller no longer ignores PtP/Virtual Interfaces. This resolves incorrect upgrade url/guest redirection url when devices are contacting controller with those network interfaces. Reported here. -Language selection is removed for now. The controller detects browser language automatically. -CSRF token will now be invalidated properly on logout. -Relax device username restriction to ^[_A-Za-z0-9][-\@_.A-Za-z0-9]*$. Reported here. -Login name with '@' symbol is now considered as invalid. -Fixed a UI bug that causes switching to different site to get stuck. -When deleting a site, verifications (pending admins) of the site will also be invalidated now. -Improve error handling on handling lingering objects. Reported here. -Controller will no longer send rate update to AP/USG when there’s no UserGroup defined and Guest Portal is disabled, so the devices will not get stuck in a re-provision loop. -Fixed DHCP Pool IP validation so it does not reject x.x.x.0 ipv4 addresses. Reported here. -Fixed incorrect description on wlan overrides in AP dialog. -Fixed VLAN ID overrides. Reported here. -Eliminated duplicate Rogue DHCP events/alerts. -Cancel button within a dialog will now go back to previous view instead of closing the entire dialog window. -Fixed quota limitation in hotspot portal. Reported here. -Fixed 'VLAN cannot be empty' error on modifying WLAN overrides. Reported here. -Per-extension voicemail option is properly provisioned to phones now. -Replace misleading placeholder with correct one in Settings-Guest Policy-Portal URL Hostname. -Fixed another UI bug that causes switching to different site to get stuck. -Add HT40/80 support for Costa Rica. -UI view is now reflecting to admin role properly after switching sites. -Rogue DHCP alert is non-repeating now. Reported here. -Restricted/Allow subnets settings will no longer cause USG provisioning loop. Reported here. -Double quotes in port forwarding description will no longer cause USG provisioning loop. Reported here. -Client history is now migrated correctly from v3 backup/installation.. Reported here. -Fixed Paypal hotspot payment gateway. Reported here. -Added system.properties inline documentation on guest portal redirector ports. -Fixed incorrect max PHY rate used in User Group rate limiting on UAP-AC and UAP-AC-Outdoor. -Fixed a UI bug that incorrect mark switch port as aggregating member port. -User can no longer restore a controller that has another restoration in-progress. -Removed a VOIP related UI element that is only for debugging. -Fixed a missing hint text in Change My Password dialog. -Fixed a UI bug that prevents users from unsetting extension's email. -Fixed device state validation on deleting device. User will now receive proper error message if the device is not eligible for deletion. -Fixed a bug where an admin cannot update its profile when another pending invitation of the same email exists. -Added systemd service unit config to Debian/Ubuntu packages. Reported here. -Added binutils to Debian/Ubuntu package dependencies. -When a wireless network is configured with schedule enabled and all days are unchecked, the CTLR/AP will respect the config. As a result, the wireless network will be provisioned but will be disabled by AP scheduler. -Workaround for device counts in Dashboard and Device view by adding self-recovery code. We're still working to identify the root cause. Report here, here and here. -Improved database migration code to resolve invalid id error in wlan_overrides. -Payment amount field in authorization (Insights and Hotspot view) are now rendered correctly for all currencies. Reported here. -When user moves a phone to another site, the phone name was reset to mac address. -Updated help text when moving a device to another site. Reported here. -Prevented invalid inputs in Hotspot view for Operator and Voucher operations. -Devices can no longer get placed on a deleted map. -Updated error message for Wireless Network WEP Key. -Read-only admins can no longer see USG PPPoE password. -WLAN override PSK is now rendered properly. -USG LLDP is now disabled on WAN port. -Moving switch to another site will also update topology information (uplink/downlinks). -Added advanced adoption capability in Switch/Gateway dialogs. -Fixed stylesheet in user verify page. -Updated VoIP Provider/Extension Settings: -External Provider, IP-Based -Added default Outbound Proxy option (provider). -Added Outbound Proxy and Voicemail options (extension). -External Provider, User-Based -Added Authorization ID option (extension). -Manual Provider -Removed Voicemail option (provider). -Authorization ID, SIP Proxy and SIP voicemail are now correctly provisioned to phones based on provider type. -Fixed a UI bug in Provider form. Reported here. UniFi Security Gateway -Fixed firewall rules for external guest portal. -Fixed an offloading module bug that causes USG restart. Reported here, here, here and here. UniFi Switch -No longer reports client IP address in reversed order. -Improve uplink port detection. UniFi AP -Fixed disabled legacy (802.11b) support on UAP-AC/UAP-AC-Outdoor. -Fixed slow throughput when UAPSD (WMM-PS) is enabled on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series. -Fixed missing Radius Accounting attributes on UAP-AC/UAP-AC-Outdoor. -WLAN scheduler no longer depends on uplink connectivity monitor. -Improve IGMP snooping on UAP-AC/UAP-AC-Outdoor. -Fixed stamgr output on UAP-AC/UAP-AC-Outdoor. Reported here. -Improve wireless connection stability with certain mobile devices on UAP-AC/UAP-AC-Outdoor. -Add HT40/80 support for Costa Rica on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series. -UAP-ACv1 2.4GHz now correctly advertise b/g/n mode support. Reported here. -UAP-AC/UAP-AC-Outdoor no longer report invalid RSSI values. -Improve the device/controller connection reliability on all models. -Fixed a multicast forwarding bug on UAP-AC and UAP-AC-Outdoor. Reported here. -Fixed connection problem with PS4/XboxOne with 3.2.11 AP firmware on UAP-AC and UAP-AC-Outdoor. Reported here and here. -- UniFi - 4.6.5 is Released for Soaking Changes in 4.6.5 -UniFi Controller -Fixed quota limitation in hotspot portal. Reported here. -Fixed 'VLAN cannot be empty' error on modifying WLAN overrides. Reported here. -Per-extension voicemail option is properly provisioned to phones now. -Replace misleading placeholder with correct one in Settings-Guest Policy-Portal URL Hostname. -Fixed another UI bug that causes switching to different site to get stuck. -Add HT40/80 support for Costa Rica. -UI view is now reflecting to admin role properly after switching sites. -Rogue DHCP alert is non-repeating now. Reported here. -Restricted/Allow subnets settings will no longer cause USG provisioning loop. Reported here. -Double quotes in port forwarding description will no longer cause USG provisioning loop. Reported here. -Client history is now migrated correctly from v3 backup/installation.. Reported here. UniFi Security Gateway -Fixed a bug in 4.2.7 firmware that disables offload module unintentionally. -- UniFi - 4.6.4 is Released for Soaking UniFi Controller -Add auto phone firmware upgrade option (per-site settings). -Support DEBUG level syslog logging. -Check (and optionally cache) phones app upgrades from CDN. -Add check button in Settings-Controller for checking UVP upgrades from CDN. -OUI table updated. -Verified admin can no longer be re-invited. -When an existing admin is invited to a new site, no password update is required. -Fixed issue with revoked admins maintaining partial access in existing logged in session. -When updating admin's email, change is rejected if that email is pending verification. -Insight/Switch-Stats Overview, POE column is now un-sortable. Reported here. -Fixed unable to set SFP/SFP+ ports to aggregate. Reported here. -User/guest filter in client view now works when browser language is Simplified Chinese. -Controller no longer ignores PtP/Virtual Interfaces. This resolves incorrect upgrade url/guest redirection url when devices are contacting -controller with those network interfaces. Reported here. -Language selection is removed for now. The controller detects browser language automatically. -CSRF token will now be invalidated properly on logout. -Relax device username restriction to ^[_A-Za-z0-9][-\@_.A-Za-z0-9]*$. Reported here. -Login name with '@' symbol is now considered as invalid. -Fixed a UI bug that causes switching to different site to get stuck. -When deleting a site, verifications (pending admins) of the site will also be invalidated now. -Improve error handling on handling lingering objects. Reported here. -Controller will no longer send rate update to AP/USG when there’s no UserGroup defined and Guest Portal is disabled, so the devices will not get stuck in a re-provision loop. -Fixed DHCP Pool IP validation so it does not reject x.x.x.0 ipv4 addresses. Reported here. -Fixed incorrect description on wlan overrides in AP dialog. -Fixed VLAN ID overrides. Reported here. -Eliminated duplicate Rogue DHCP events/alerts. -Cancel button within a dialog will now go back to previous view instead of closing the entire dialog window. UniFi Security Gateway -Fixed firewall rules for external guest portal. UniFi Switch -No longer reports client IP address in reversed order. -Improve uplink port detection. UniFi AP -Fixed disabled legacy (802.11b) support on UAP-AC/UAP-AC-Outdoor. -Fixed slow throughput when UAPSD (WMM-PS) is enabled on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series. -Fixed missing Radius Accounting attributes on UAP-AC/UAP-AC-Outdoor. -WLAN scheduler no longer depends on uplink connectivity monitor. -Improve IGMP snooping on UAP-AC/UAP-AC-Outdoor. -Fixed stamgr output on UAP-AC/UAP-AC-Outdoor. Reported here. -Improve wireless connection stability with certain mobile devices on UAP-AC/UAP-AC-Outdoor. -Add HT40/80 support for Costa Rica on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series. -UAP-ACv1 2.4GHz now correctly advertise b/g/n mode support. Reported here. -UAP-AC/UAP-AC-Outdoor no longer report invalid RSSI values. -Improve the device/controller connection reliability on all models. -- UniFi 4.6.3 is released Feature Add: -CTRL - Add support to create an option to allow remote user VPN access to site to site VPN. -CTRL - Add Outbound proxy and authentication ID fields in VOIP selections. -CTRL - Add prefetch of UVP platform image into local storage. -CTRL - Add SIP from User field for some SIP providers in IP base. -CTRL - Add support to put any device into map. -CTRL - Add configurable voicemail Url for UVP reported by forum. -CTRL - Add multiple accounting server support for 802.1x/WPA2 Enterprise. -CTRL - Add multiple radius server support for 802.1x/WPA2 Enterprise. -CTRL - Add UI support for enable/disable UAPSD. It is default disabled. -UVP App - Add outbound proxy option support. -UVP App - Add multi-sip account support. -UVP App - Add support to launch 3rd party app as handset is lifted. -UVP Exec - Add support for USB speaker. -UAP - Add configurable management rates via config.properties. -UAP - Add configurable broadcast/multicast rates via config.properties. Change List: -CTRL - version change from v4.6.0 to v4.6.3 -CTRL - Fixed USW config edit always append to end of dialog instead of replace. -CTRL - Fixed a read only admin can not verify himself and causes a loop. -CTRL - Changed naming from Network Groups to Management VLAN. -CTRL - Handle setting USW aggregated ports properly if they are already aggregated. -CTRL - Fixed invalid payload error when creating aggregation with last port reported by forum. -CTRL - Fixed frameable response(clickjacking). -CTRL - Fixed missing events for clients. -CTRL - Fixed port forwarding range settings reported by forum. -CTRL - Fixed a bunch of map related issues. -CTRL - Add missing event calls for admins. -CTRL - Fixed controller crashing after setting net to 10.0.0.1/8 reported by forum. -CTRL - Fixed random firefox crashes. -CTRL - Increase load balance limit from 30 to 128. -CTRL - Fixed insights block client is not working. -CTRL - Add date and time for last executed speed test. -CTRL - Fixed dashboard showing LAN up and down as 0. -CTRL - mDNS doesn't work across subnets. -CTRL - Fixed speed test "Close" mouse click hin is persistent. -CTRL - Move the show properties icon to not overlap the scroll arrow. -CTRL - Add config.properties file when doing backup. -CTRL - Fixed recursive URL in hotspot. -CTRL - Added a button to launch a login page for hotspot operators. -CTRL - Fixed Guest filter not working in hotspot manager. -CTRL - Fixed UVP can not be detected by controller on non default ports reported by forum. -CTRL - USW port selection in panel will bring to selected port. -CTRL - Add last port to wired cliends in insights. -CTRL - Fixed AP TX power gets set back to Auto. -CTRL - Fixed controller memory leaks. -CTRL - Fixed events/insights always get set to last page. -CTRL - Change insights 1 year to All. -CTRL - Trouble renaming APs reported by forum. -CTRL - Guest in Events are greyed out even if connected. -CTRL - Fixed events filter page number is off depending on the filter setup. -CTRL - Fixed WLAN groups can get messed up during updates. -CTRL - Fixed recent activities charts gets blanked until next refresh. -CTRL - Show disable in AP dialog if WLAN is disabled. -CTRL - Allow 72 entries for allow subnets reported by forum. -CTRL - Refresh resets USW scrolling views. -CTRL - Fixed forget password having two back buttons. -CTRL - Fixed speed test progress bar is backwards. -CTRL - Fixed USW 24 display object is not consistent. -CTRL - Do not allow v4 controller to be upgraded from v2. -CTRL - Fixed Clients page, page numbering can get our of order. -CTRL - Fixed ZH group, channel should be uneditable. -CTRL - Fixed rate limit does not get push to user if set to another lower limit. -CTRL - Fixed Hotspot display issue reported by forum. -CTRL - Fixed advance adopted AP using stale 5Ghz channel width settings. -CTRL - Fixed invalid payload when enabling/disabling dhcp settings and ip subnets. -CTRL - Fixed incoming traffic through WAN from ip based SIP provider being dropped. -CTRL - Fixed settings, wireless networks, wlan groups not working. -CTRL - Fixed saving settings sub-views fails on second try. -CTRL - Fixed ZH APs do not detect internet down. -CTRL - Fixed windows java not executing the right path. -CTRL - Fixed VOIP provider view stuck in saving. -CTRL - Fixed incorrect call duration data. -CTRL - Fixed backup filters out blocked users outside given time span reported by forum. -CTRL - Fixed some security bugs. -CTRL - Fixed controller/discovery too in some Win8.1 systems can not discover devices reported by forum. -CTRL - Change 360 to 365 days in a year. -CTRL - Fixed auto responder grammer. -CTRL - Fixed refresh will always force to go back to controller panel. -CTRL - Support switch dialog config multiple port at once. -CTRL - Add format hint for guest portal redirect url. -CTRL - Add support for SIP ALG disable/enable in config.properties. -CTRL - Alert emails are done per site reported by forum. -CTRL - Use static DNS if static is selected in USG reported by forum. -CTRL - Allow Costa Rica radio tab to selectable channel width and channels. -CTRL - Fixed switch stats items per page limit does not work. -CTRL - Fixed can not set alias to known clients. -CTRL - Fixed some missing events. -CTRL - Change UVP upgrade timer so it will not show disconnected for a long time reported by forum. -CTRL - Fixed STP blocking status icon inconsistent. -CTRL - Fixed missing firewall rules for remote user vpn network. -CTRL - Fixed extension menu not always shown. -CTRL - Fixed wrong DHCP state in UniFi discovery tool. -CTRL - Change UVP extension number length to 15 digits reported by forum. -CTRL - Add support for ipsec site to site VPN to improve performance. -CTRL - Create new group will always require an extension. -CTRL - Allow emails in phone extensions to not be mandatory. -CTRL - Fixed controller crash while changing network interface frequently. -CTRL - Forgetting multiple wireless APs in uplink causes some to become isolated. -CTRL - Fixed special characters in port forwarding description causes USG to go into provisioning loop reported by forum. -CTRL - Updated copyright to 2015. -UAPS - Fixed a case where wireless uplink stays isolated. -UAPS - Fixed roaming statistics. -UAPS - Fixed wireless uplink UAP LR stays isolated after a second wireless AP joins. -UAPS - Fixed waiting for firmware upgrade loop. -UAPs - Fixed a regression introduced in 3.2.7(fixing a crash) on rate limiting reported from forum. -UAPs - Fixed wireless uplink monitor randomly resets the interfaces causing disconnects. Note, Please setup a gatway ip address if using wireless uplink. If not using wireless uplink, please disable wireless uplink monitor. -UAPs - Fixed some memory leak in hostapd reported from forum. -UAPs - Default timezone to UTC. -UAPs - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.10 CTRL code or higher. -UAPs - Fixed rate limiting not working in certain configs, regression introduced in 3.2.7 reported from forum. -UAPs - Fixed radius accounting rounding account stop messages reported from forum. -UAPS - Fixed help text when using stamgr. -UAPS - Fixed hostname does not get updated sometimes. -UAPs(except AC) - Disable UAPSD by default. For Spectral phone users, please change to enable in config.properties. -UAP Pro - Improved 5Ghz HT40 performance with Intel6300. -UAP Pro - Fixed ssh reboot along with toughswitch causes reboot loop. -UAP AC - Corrected power display again from previous fix. -UAP AC - Fixed AP can not pass PPPoE traffic reported from forum. -UAP AC - Fixed kernel panic during heavy reset testing. -UAP AC - Fixed Rogue AP reported as secured when it is open. -UAP AC - Fixed DHCP offers containinng wrong subnet mask reported from forum. -UAP AC - Added hostapd support for UAP ACS to help fix some WPA/2 Enterprise Radius issues reported from forum. -UAP AC - Fixed rebooting issue after some stress SSID testing. -UAP AC - Fixed STA Packet/byte counts is unreasonably low. -UAP AC - Fixed kernel panic in certain wireless environments. -UAP AC - Fixed sta reported info is not always accurate. -UAP AC - Fixed phantom SSID(ethx/wlxx) broadcast on the air reported from forum. -UVP App - Updated Play Store version to fix older Play Store update issues. -UVP App - Added Play Movies to Google collections. -UVP App - Fixed plug in headset and no sound output from volume adjustment report by forum. -UVP App - Add speaker on/off button for sound recorder app. -UVP App - Fixed default sip account index. -UVP App - Add support for call button intent filter reported by forum. -UVP App - Fixed contact page flicker when syncing contact. -UVP App - Prevent app from running on other phones(smartphones). -UVP App - Fixed inform url and inform ip in inform payload reported by forum. -UVP App - Default to last screen after incoming call is disconnected. -UVPs - Reduce some internal generated noise. -UVP Pro - Fixed Wifi icon reported byforum. -UVP Pro - Fixed Wifi SSID issue reported by forum. -UVP Exec - Fixed speaker switching mode. -UVP Pro/Exec - Added notification of WiFi disable if ethernet and WiFi is both connected. -UVP Pro/Exec - Fixed crash when login to Google account when ethernet is not available. -UVP Pro/Exec - Improve on Camera performance. -UVP Pro/Exec - Disable Panoramic mode. -USW - Fixed heartbeat missed in certain stressed condition and resource temporarily unavailable. -USW - Fixed failed to upgrade during heavy stress testing. -USG - Fixed stuck in reboot if downgrading software versions. -USG - Inform DNS server for PPPOE connections. -USG - Fixed wired clients stats are in reverse order. -USG - Fixed memory leaks. -USG - Fixed bootstrap webUI static ip shows connected to internet when it is not. -- UniFi 4.6.0 is released Feature Add: -CTRL - Added USG/PBX feature(in Beta). -CTRL - Added port forward support with ranges. -CTRL - Added call log support for UVP. -CTRL - Added ability to search for AP BSSID. -CTRL - Added more info on roaming event messages. -CTRL - Added IPPay Support to hotspot. -CTRL - Added Switch Stats to Insights. -CTRL - Added support for allowing changing of config for disconnected AP. -CTRL - Added DNS configuration for all USG connection types. -CTRL - Added hostname for unauthorized guest in hotspot manager. -USG - Add set inform URL to bootstrap UI. Change List: -CTRL - version change from v4.5.2 to v4.6.0 -CTRL - Fixed wireless link coloring. -CTRL - Fixed wired client events. -CTRL - Fixed clients has no uplink port info in a site without USG. -CTRL - Fixed invalid wired client disconnect events when topology change. -CTRL - Only request DHCP for guest VLAN when guest portal is enabled. -CTRL - Fixed unexpected mouse cursor in maps with firefox browser. -CTRL - Fixed uncaught error when adding sites and maps. -CTRL - Fixed placed devices disappears from map when upload image is replaced with google map. -CTRL - Fixed cursor spins continously in bootstrap UI in USG. -CTRL - Fixed UVP can not connect to PBX after VOIP network changes. -CTRL - Fixed client uplink port reporting does not change on USW. -CTRL - Fixed AP coverage halo becomes unattached to AP after map zooms. -CTRL - Fixed insight pages are not updated properly. -CTRL - Fixed UI crash when moving map zoom bar up and down. -CTRL - Removed embargoed countries from country selection as well as removed Japan. -CTRL - Fixed AP upgrade button toggling on/off for unadopted devices. -CTRL - Fixed failure when restoring a backup file. -CTRL - Map halo is incorrect when radio is in off state. -CTRL - Fixed disconnected devices removed from the map. -CTRL - Fixed sorting on Switch UI tab. -CTRL - Fixed error shown when saving network edits. -CTRL - Fixed mouse tool tips not refreshing properly in some cases. -CTRL - Fixed error message when forgetting isolated devices. -CTRL - Fixed unexpected charater in the USW Native Network field. -CTRL - Fixed filtering not working correctly in "Events". -CTRL - Fixed refresh rate is not sticky. -CTRL - Fixed APs shows up as clients in insights. -CTRL - Fixed make controller discoverable on L2 Network reported from forum. -CTRL - Fixed switch going to full provision for a port POE change reported from forum. -CTRL - Fixed moving the switch from one site to another and apply a config shows an error message. -CTRL - Fixed to update PBX if timezone changes. -CTRL - Fixed changing extensions sometimes does not get updated correctly. -CTRL - Fixed UVP were not allowed to move from site to site. -CTRL - Improved UI of 48 port switch device tab. -CTRL - Fixed stuck in saving in the settings tab. -CTRL - Fixed UI being slow when adding/removing device objects in maps. -CTRL - Fixed controller client does not show up at insights until noted. -CTRL - Clearly label phones without extension assignments. -CTRL - Fixed Config.properties was not honored reported from forum. -CTRL - Fixed Timezone during initial setup is not reflected after the setup. -CTRL - Fixed network stats update only if port is up. -CTRL - Fixed captive portal not authorizing guest. Please update your portal pages with updated scripts provided. -CTRL - Fixed unplaced devices are gone if placed on a deleted map. -CTRL - Fixed internal names appearing in invite email. -CTRL - Enable HT80 support for South Africa on UAP AC reported from forum. -CTRL - Fixed antenna gain should not be editable in most models. -CTRL - Fixed duplicate entries in admin email section. -CTRL - Make historical data selection sticky. -CTRL - Fixed device disappears from map view forever if map deleted. -CTRL - Fixed controlller logging selection to be sticky. -CTRL - Fixed default map displays off center when deleting another map. -CTRL - Fixed alert icon consistency. -CTRL - Fixed statistics->Recent activitives at the latest point always shows 0 clients. -CTRL - Fixed ubuntu install message to show correct plural form. -CTRL - Fixed insight past connection/guest is off by an hour. -CTRL - Show audio upload format supported for Auto Responder. -USW - Fixed failed to bootup in stress warm reboot testing. -USW - Add delay before switching POE power. -USW - Updated switch stats in insights. -USW - Fixed changing POE voltages would not require full re-provision and add enhanced provisioning. -USW - Fixed flow control is not properly configured when it's enabled on controller. -USG - Fixed USG adoption failure. -USG - Add byte count for port forwarding. -USG - Fixed USG reboot loop in certain configs. -USG - Fixed USG failed to reboot after a failed applied config. -USG - Fixed incorrect uptime. -USG - Fixed making sure to use updated mac for booting. -USG - Fixed some wired client reported events. -USG - Fixed bootstrap UI timer continously spins. -UVP - Adjust handset mic/speaker gain. -UVP - Fixed some POE Brick ethernet interoperability. -UVP - Enable BT/Wifi/Camera support for supported models. -UVP - Adjust headset speaker gain. -UVP - Fixed volume not persistent after reboot. -UVP - Fixed notifications to either use LED or LCD. -UVP - Remove wifi interface properties for UVP reported from forum. -UVP - Fixed memory leak on BT drivers. -UVP - Make auto launching phone app when handset is lifted configurable. -UVP - Fixed incall-page volume seekbar level. -UVP - Fixed play call waiting tone instead of ringtone if audio mode is in call reported from forum. -UVP - Fixed call waiting with different codecs causes no sound in certain cases. -UVP - Disable Software-echo-suppression by default. -UVP - Fix mute status of call reported from forum. -UVP - Disable wizard setup for wifi supported models. -UVP - Updated manufacturing properties reported from forum. -UVP - Fixed sluggish/hang issue on BT supported models. -UVP - Add Spanish translation. -UVP - Format dialpad number by locale. -UVP - Improve handset audio quality. -UVP - Improve audio call latency. Known Limitations -Call Logs are not 100% accurate. -UVP must be used with USG unless you setup a third party router to map unifi to the controller IP address and being able to resolve unifi = controller ip. -Reminder that Controller will not prevent creating ext numbers that overlaps with emergency services. -- UniFi 4.5.2 is released Release Note: -This release is mainly to be used for UniFi Security Gateway(USG) and UVP Phones. -This release is base on v3 AP software. Controller is v4 -Please backup previous controller configuration. -Can install this new or upgrade from v3.2.1/v3.2.5/v4.1.1/v4.2.0/v4.3.0. -Will not support upgrade from v2 to v4. -- UniFi 4.2.0 is released Change List 4.1.1 to 4.2.0 -CTRL - Fixed Dashboard showing devices down when it is not. -CTRL - Add WLAN information to connected events. -CTRL - Change text on Wireless Guests to Guests. -CTRL - Correct Hotspot misspelling. -CTRL - Fixed error message in Guest Portal. -CTRL - Added popup box to state not to block client that is running the controller. -CTRL - Fixed some cases configuring USG does not apply the changes. -CTRL - Fixed wireless adoption failures. -CTRL - Added Speed test support when an USG is part of the network. -CTRL - Fixed changing timezone not updating the devices' timezone. -CTRL - Add Static IP to insights. -CTRL - Fixed UI hang in certain sequence. -CTRL - Improve on responsiveness on UI during searches or large databases. -CTRL - Fixed statistics sorting. -CTRL - Fixed WLAN User Group defaults to Default. -CTRL - Fixed WLAN default configurations. -CTRL - Updated statistics page. -CTRL - Add a space in the legacy selection area. -CTRL - Removed name limitation format for SSID in override section. -CTRL - Fixed inconsistency in AP WLAN Group configuration. -CTRL - Fixed AP in HT40 mode shown as HT20. -CTRL - Add WLAN scheduler support. -CTRL - Gracefully shutdown mongo database when existing on Linux platforms. -CTRL - Removed name limitation format for User Group. -CTRL - Fixed AP configuration tab sometimes is blank using IE browser. -CTRL - Fixed Events presentation is not correct in IE browser. -CTRL - Fixed search in rogue access point is limited to the name. -CTRL - Fixed event filtering responsiveness. -CTRL - Fixed time scope of events filtering consistency. -CTRL - Fixed traffic display not showing up properly in switching time periods. -CTRL - Client fixed IP should be disabled if no DHCP server(USG). -CTRL - Added Java 8 support. -CTRL - Fixed UAP LR showing up as 5Ghz supported. -CTRL - Loosen the restriction on how many recent events. -CTRL - Fixed install wizard adoption/selection was limited to one page. -CTRL - Fixed display issue in insights when flipping between tabs. -CTRL - Added notification when downloading a backup. -CTRL - Added block save if no changes are made in the Network section. -CTRL - Added email notification if admin email is changed. -CTRL - In Linux, generalize any AP only comments as wired devices are supported now. -CTRL - Fixed Win8+Firefox pull down menu from install wizard is chopped. -CTRL - Fixed map coverage related issues. -CTRL - Fixed event logs can be search by hostnames. -CTRL - Fixed blank alerts. -CTRL - APs are missing from the map after moving from one site to another. -CTRL - Map coverage does not get updated after changing TX power. -CTRL - Fixed AP placement shifted after changing scale. -CTRL - Fixed Event/Alert panel stop working after a few click. -CTRL - Fixed Last AP information missing from Insights. -CTRL - Fixed Past Guest Authoriations does not have hostname. -CTRL - Added items per page selection in Devices. -CTRL - Fixed auto populated was overwriting/covering some entry boxes. -CTRL - Updated Paypal portal scripts. -AP - Updated AP code to v3.2.5 -USG - Can not provision 40 or more networks. -USG - Implemented Speed test support. -USG - Fixed static hostname unifi cause stuck in disconnect state. -USG - Updated board name to UniFi naming. -- UniFi 4.1.1 is released Change List 4.1.0 to 4.1.1 -CTRL - Fixed map scale not scaling. -CTRL - Fixed heatmap coverage area. -CTRL - Add edit feature at admin tab to allow changing password and email. -CTRL - Fixed disable DHCP server on USG does not work. -CTRL - Fixed delete site should delete related site VPN. -CTRL - Fixed can not save/config WPA/WPA2 properly. -CTRL - Fixed connected clients do not show up in known client list initially. -CTRL - Fixed past connections only show clients at the associated time frame. -CTRL - Fixed use hostname instead of MAC Address for offline clients in Past Connections. -CTRL - Fixed devices on maps does not show unlock state. -CTRL - Fixed Discovery tool does not allow resetting of USG. -CTRL - Fixed statistics/calendar hour and month pointers are not using "pointing fingers" in Firefox. -CTRL - Fixed remote user VPN statistics and clients are missing. -CTRL - Fixed map topology for wireless uplink APs. -CTRL - Fixed default time off by an hour at past connections and past guest authorizations. -CTRL - Fixed wrong date placements of clients in past guest authorization. -CTRL - Fixed missing data in insights during upgrade. -CTRL - Remove format requirements for creating a network name. -CTRL - Fixed showing incorrect duplex on USG when WAN port is not connected. -CTRL - Fixed input fields that have focus should not get refreshed. -CTRL - Fixed no data are carried over in statistics when upgraded. -CTRL - Change order of buttons in insights. -CTRL - Fixed APs on maps did not carry over during upgrade. -CTRL - Fixed controller shows fail to start due to huge database migration time needed. -CTRL - Added remote VPN support. -CTRL - Disable UAP AC from being allow in ZH group as it is not supported yet. -CTRL - Fixed 5Ghz information missing in maps. -CTRL - Fixed maps coverage circle drifting. -CTRL - Fixed UAP AC 5Ghz defaults to HT40. -CTRL - Fixed site to site VPN to support cross sites. -CTRL - Fixed saving error when changing dhcp ranges. -CTRL - Fixed can not delete usergroup. -CTRL - Fixed provision did not start after setting up site to site VPN. -CTRL - Fixed overriding error in zero handoff profile. -CTRL - Fixed search should allow hostname/mac/alias in insights. -CTRL - Fixed authorized guest not showing up in past authorized guests list. -CTRL - Add 7 day to past guest authorization. -CTRL - Fixed Rogue AP not showing hostname. -CTRL - Fixed insights pages slow to a crawl with huge database upgrades. -CTRL - Fixed missing a site in the site to site setup page. -CTRL - Fixed for UAP Outdoor5 to disable DFS channel that are not supported. -CTRL - Fixed for AP rolling upgrade is greyed out. -CTRL - Fixed refresh arrow spinning forever. -CTRL - Fixed controller tab in "saving" mode forever. -CTRL - Fixed up/down displays between dashboard and device to match. -CTRL - Fixed missing default site name in site to site vpn pull down when many sites. -CTRL - Fixed clients shows up on guest then as a user. -CTRL - Fixed APs showing up on client list. -CTRL - Fixed disconnect alerts not working after second disconnect. -CTRL - Fixed clients statistic data not updating. -CTRL - Fixed voucher seconds decimal places. -CTRL - Fixed past connections and past guest auth filtering resolution. -CTRL - Fixed override WLAN does not work. -CTRL - Fixed install wizard only allows selecting upto 5 devices on the list to adopt./li> -CTRL - Fixed install wizard does not like "_" underscores in username. -CTRL - Fixed hotspot's operator selection not working. -CTRL - Fixed sorting of ipaddress on client tab not working if no ipaddress. -CTRL - Fixed map slider bar goes beyond its limits. -CTRL - Fixed authorized guest manually but after a refresh, it goes back to pending. -CTRL - Fixed 2Ghz APs shows its channel as NaN. -CTRL - Fixed site always defaults to US. -CTRL - Fixed MAPs buttons get reset. -CTRL - Fixed number of alerts are missing. -CTRL - Fixed create a new account, refresh, account disappears. -CTRL - Fixed dates are in incorrect formats in some places. -CTRL - Fixed TX retry showing twice, should be TX retry/RX retry. -CTRL - Fixed some migration bugs. -CTRL - Fixed now allowing ZH to be on DFS channels. -CTRL - Fixed MAC upgrade/installation issues. -CTRL - Add support for email template to support non APs. -CTRL - Fixed not allowing two USG to be adopted in same site. -CTRL - Fixed locate buttons are out of sync on different pages. -CTRL - Remove wireless from controller launch bar. -CTRL - Fixed Portal Customization with non-ASCII SSID. -CTRL - Fixed multi-use vouchers are incremented twice per use. -CTRL - Fixed saving errors when enabling LED/wireless uplink monitor in certain config. -CTRL - Fixed USG being in adopting state forever. -CTRL - Discovery tool to enabled USG LED Locate support. -CTRL/USG - Align all TX/RX counters correctly for USG/AP/Clients. -USG - Can not create networks with certain backup file. -- UniFi 3.2.10 is released From 3.2.7->3.2.10 -UAPS - Fixed a case where wireless uplink stays isolated. -UAPS - Fixed roaming statistics. -UAPS - Fixed wireless uplink UAP LR stays isolated after a second wireless AP joins. -UAPS - Fixed waiting for firmware upgrade loop. -UAPs - Fixed a regression introduced in 3.2.7(fixing a crash) on rate limiting reported from forum. -UAPs - Fixed wireless uplink monitor randomly resets the interfaces causing disconnects. Note, Please setup a gatway ip address if using wireless uplink. If not using wireless uplink, please disable wireless uplink monitor. -UAPs - Fixed some memory leak in hostapd reported from forum. -UAPs - Default timezone to UTC. -UAPs - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.9 CTRL code or higher. -UAPs - Fixed rate limiting not working in certain configs, regression introduced in 3.2.7 reported from forum. -UAPs - Fixed radius accounting rounding account stop messages reported from forum. -UAPS - Fixed help text when using stamgr. -UAPS - Fixed hostname does not get updated sometimes. -UAPs(except AC) - Disable UAPSD by default. For Spectralink phone users, please change to enable in config.properties. -UAP Pro - Improved 5Ghz HT40 performance with Intel6300. -UAP Pro - Fixed ssh reboot along with toughswitch causes reboot loop. -UAP AC - Corrected power display again from previous fix. -UAP AC - Fixed AP can not pass PPPoE traffic reported from forum. -UAP AC - Fixed kernel panic during heavy reset testing. -UAP AC - Fixed Rogue AP reported as secured when it is open. -UAP AC - Fixed DHCP offers containinng wrong subnet mask reported from forum. -UAP AC - Added hostapd support for UAP ACS to help fix some WPA/2 Enterprise Radius issues reported from forum. -UAP AC - Fixed rebooting issue after some stress SSID testing. -UAP AC - Fixed STA Packet/byte counts is unreasonably low. -UAP AC - Fixed kernel panic in certain wireless environments. -UAP AC - Fixed sta reported info is not always accurate. -UAP AC - Fixed phantom SSID(ethx/wlxx) broadcast on the air reported from forum. -CTRL - Updated portal sample hotspot scripts to use tls v1 and ssl v1. -CTRL - Enable HT80 support in South Africa. -CTRL - Fixed web ui closes with error when downloading support info from chrome browser. -CTRL - Enable connectivity monitoring also for Zero Handoff. -CTRL - Fixed calendar selection is off at insight/past guest authorization reported from forum. -CTRL - Fixed map scaling issue with Firefox/Ubuntu. -CTRL - Fixed "Events" time scope filter is off. -CTRL - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.9 AP code or higher. -CTRL - Fixed Invalid Operator Account creation error in hotspot manager. -CTRL - Removed embargoed countries from country selection as well as removed Japan. -CTRL - Added some enhancement messages on roaming in logs. -CTRL - Clean up some api error messages. -CTRL - Fixed insight calendar off by a day. -- UniFi 3.2.7 is released From 3.2.5->3.2.7 -UAPs - Fixed changing wireless uplink AP channel causes download VAP to be stuck. -UAPs - Fixed failed to remove links between Wireless Uplink APs. -UAPs - Fixed Guest Portal intermittent failures reported from forum. -UAPs - Fixed rogue APs with PSK reported as open. -UAP - Fixed the failed fix for "Fixed random crash when rate limiting is enabled." reported from forum. -UAP Pro - Fixed panics on re-provisioning with ZH enabled/disable. -UAP Pro - Fixed throughput degradation after AP re-provision with clients that are 2x2 when the interface for 2Ghz is 3x3. -UAP AC - Corrected display of TX power. No TX power changes, only display fixes reported from forum. -CTRL - Fixed Insights/Past Connections only displays MAC addresses reported from forum. -CTRL - Fixed advanced adoption not working with IE11. -CTRL - UAP AC v2 will be forced to upgrade if versioning is 3.1.12 or earlier. -CTRL - Fixed country code list contains multiple set of countries. -CTRL - Fixed Poodle/SSLv3 vulnerability. -CTRL - Add Java 8 support. -CTRL - Add new feature to allow device update before adoption. -CTRL - Fixed upgrade will stop mFi controller from operation reported from forum. -CTRL - Wireless uplink only supports 4 APs. -CTRL - Fixed long AP alias name for wireless uplink will cause selection box to be not seen, reported from forum. -- UniFi 3.2.5 is released From 3.2.1->3.2.5 -CTRL - MAC installer fails to upgrade from v2 or v3 properly. -CTRL - MAC installer missing css. -CTRL - Fixed Linux Installer fails to upgrade with previous database. -CTRL - Disable allowing Zero Handoff on DFS channels. -CTRL - Fixed Events time filtering not working until other selections are made. -CTRL - Fixed External portal code delays when there are many APs. This is a fix in the sample external portal code. Not inside the Controller. -CTRL - Fixed UI slows when lots of maps with lots of AP. -CTRL - Fix MAC installer wiping out old database if previous version's controller is not closed. -CTRL - Remove PC/MAC wording in Linux installation. -CTRL - Fixed showing correct channel set for UAP Outdoor5 for US. -CTRL - Fixed guest voucher decimal places for multi-use. -CTRL - Fixed Portal Customization with non-ASCII SSID. -CTRL - Fixed multi-use vouchers are incremented twice per use. -CTRL - Fixed adding new site always default to US eventhough a different country was selected in the wizard. -CTRL - Corrected some wording to plural/singular. -CTRL - Fixed detail tab missing an expansion arrow. -CTRL - Updated portal paypal sample code. -CTRL - Linux Installer. Gracefully shutdown mongo db when shutting down controller.. -UAP/LR - Added counterfeit check.. -UAPs - Fixed Rate limiting/unlimiting with usergroups not working. -UAPs - Fixed Upgrade failure due to uplink monitor still running. -UAP - Fixed crash on out of memory when rate limiting is enabled. -UAPs(not AC) - Fixed Zero Handoff causes client to roam to wrong AP. -UAPs(not AC) - Fixed Wireless Uplink APs are not disabled properly when back to regular AP mode. -UAPs(not AC) - Fixed crash when detecting an AP transitioning from AP to isolated mode. -U5O - Updated correct channel list for European Countries. -UAP/LR - Fixed ping drops in noisy environments. -UAP/LR - Fixed random crash when rate limiting is enabled. -UAP/LR - Fixed crash after stress reboot test. -UAP-AC - Fixed GTK Key is not reset/set when interface up/down or connecting new STA. -UAP-AC - Fixed keys might not get installed properly for associating/disassociating STAs in 802.1x modes. -UAP-AC - Fixed 2Ghz radio stop sending beacon during heavy multicast stresss test. -UAP-AC - Fixed power output level for Australia country code. -UAP-AC - Added basic SNMP support. -UAP-AC - Fixed long ping delay to ethernet. -UAP-AC - Fixed Guest Portal allow devices to pass data to others before accepting TOS. -UAP-AC - Fixed AMPDU RX packet loss caused by response timeout. -UAP AC - Clean up STA events when STA is not associated. -- UniFi 3.2.1 is released From 3.1.13->3.2.1 -Installer - Fixed upgrade failure for MAC OS installation. -CTRL - Fixed Insight, Past Guest Authorization selecting calendar day adds a day. -CTRL - Fixed Insight, Past Guest Authorization front arrow skips a day. -CTRL - Fixed Insight, Past Guest Authorization back arrow does not work on the calendar. -CTRL - Fixed Guest Portal can not use Cyrillic for simple password. -CTRL - Fixed UTF-8 coding for guest portal voucher. -CTRL - Fixed a typo in unifi_sh_api for unauthorize guest. -CTRL - Fixed Rogue AP reports encrypted when AP is open security. -UAP Outdoor+ - Improvement to AP stuck to low rates. -- UniFi - 3.1.13-RC is Released From 3.1.10->3.1.13 -CTRL - Fixed Term of Service can be bypassed in Hotspot. -CTRL - Fixed UI not showing 11ac for UAP-ACs. -CTRL - Fixed Event Tab does not show events unless another tab is launched first. -CTRL - Fixed vulnerability of VLAN Hopping Attack. -CTRL - Fixed incorrect EIRP values in AP Detail dialog box. -CTRL - Fixed custom TX power entry to prevent wrong values from entered. -CTRL - Removed "Are you sure you want to restart the access point?" popup. -CTRL - Removed Login Expired Alert popup. -CTRL - Fixed Forget AP does not always reset AP to default configuration. -CTRL - Add control for UAP-AC enable/disable TXBF in config properties. Default is now disabled as mentioned above for MacBook Client issues. -CTRL - Fixed Admin password hash transmitted in syslog. -CTRL - Fixed site admin list being empty. -CTRL - Fixed Alert not working sometimes, therefore no emails going out. -CTRL - Fixed Override button disappears if SSID is >29 characters. -CTRL - Default all 11ac Access Points to medium power for new adoption. -CTRL - Fixed language customization issues in guest portal. Add missing UTF-8 support. -CTRL - Fixed Hotspot redirect to error page 404. -CTRL - Fixed UAPs respond to hostnames with/without a dash between names. Conform to RFC 952. -CTRL - Fixed Insights: Known Wireless Clients might not get updated properly. -CTRL - Correct Unifi name to UniFi in Linux install. -UAP-ACv2 - Fixed Country Code change to any Europe Countries will brick the AP. This existed in all version 3 software. -UAP-AC - Fixed rate limiting for upstream not working when more than one VAP is enabled. -UAP-AC - Improved throughput when greater than five clients are connected in heavy throughtput test. -UAP-AC - Corrected some regulatory limit power levels. -UAP-AC - Improve 2Ghz adjacent channel interference at the edge of range throughput issues. -UAP-AC - Improve tcp ack response. -UAP-AC - Workaround MacBook 11ac issues related to high packet loss and RTT delays. This is a client issue when TXBF is enabled. -UAP-AC - Fixed AP resetting radio in a high interference environment. -UAP-AC - Fixed AP disconnecting clients in a high interference environment. -UAP-AC - Fixed kernel panic during heavy stress connect/disconnect testing. -UAP-AC - Fixed kernel panic during heavy multicast stress testing. -UAP-AC - Fixed some packet lost when STA is in Power Save. -UAP-AC - Fixed auto channel selection for 2Ghz. It was always defaulting to ch1 in a busy environment. -UAP-AC - Bandwidth limiting not working for UDP packets to multiple stations. -UAP-AC - Fixed sending wrong SSID-tag to external guest portal. -UAPs - Added enhancement to filter out UBNT discovery response frames to minimize unnecessary traffic in the air. -UAPs - Fixed AP does not restart properly after having a long uptime. -UAPs - Do not forward switch BPDU to Stations. -UAP(except UAP-AC) - Fixed Access Request missing some mandatory attributes with Radius Server. -UAP - Improve Wireless Uplink connection issues. -UAP - Improvements to ZH dropping packets when client is in the middle of two APs. -UAP - Improvements to ZH dropping packets in some specific cases due to ACK collisions from the other ZH APs. -UAP - Disable 802.11d country IE in beacon. -UAP - Fixed failed to establish wireless uplink due to too many APs around. -UAP - Fixed ZH ping ponging effect when in the middle of APs. -UAP - Fixed ZH to synchronize beacon sequence number. -UAP-PRO/Outdoor - Fixed secondary port when VLAN enabled limited to MTU=1468. -- UniFi - 3.1.12-RC is Released From 3.1.10->3.1.12 -Controller - Fixed UI not showing 11ac for UAP-ACs. -Controller - Fixed Event Tab does not show events unless another tab is launched first. -Controller - Fixed vulnerability of VLAN Hopping Attack. -Controller - Fixed incorrect EIRP values in AP Detail dialog box. -Controller - Fixed custom TX power entry to prevent wrong values from entered. -Controller - Removed "Are you sure you want to restart the access point?" popup. -Controller - Removed Login Expired Alert popup. -Controller - Fixed Forget AP does not always reset AP to default configuration. -Controller - Add control for UAP-AC enable/disable TXBF in config properties. Default is now disabled as mentioned above for MacBook Client issues. -Controller - Fixed Admin password hash transmitted in syslog. -Controller - Fixed site admin list being empty. -Controller - Fixed Alert not working sometimes, therefore no emails going out. -Controller - Fixed Override button disappears if SSID is >29 characters. -Controller - Default all 11ac Access Points to medium power for new adoption. -Controller - Fixed language customization issues in guest portal. Add missing UTF-8 support. -Controller - Fixed Hotspot redirect to error page 404. -Controller - Fixed UAPs respond to hostnames with/without a dash between names. Conform to RFC 952. -Controller - Fixed Insights: Known Wireless Clients might not get updated properly. -Controller - Correct Unifi name to UniFi in Linux install. -UAP-AC - Improve 2Ghz adjacent channel interference at the edge of range throughput issues. -UAP-AC - Improve tcp ack response. -UAP-AC - Workaround MacBook 11ac issues related to high packet loss and RTT delays. This is a client issue when TXBF is enabled. -UAP-AC - Fixed AP resetting radio in a high interference environment. -UAP-AC - Fixed AP disconnecting clients in a high interference environment. -UAP-AC - Fixed kernel panic during heavy stress connect/disconnect testing. -UAP-AC - Fixed kernel panic during heavy multicast stress testing. -UAP-AC - Fixed some packet lost when STA is in Power Save. -UAP-AC - Fixed auto channel selection for 2Ghz. It was always defaulting to ch1 in a busy environment. -UAP-AC - Bandwidth limiting not working for UDP packets to multiple stations. -UAP-AC - Fixed sending wrong SSID-tag to external guest portal. -UAPs - Added enhancement to filter out UBNT discovery response frames to minimize unnecessary traffic in the air. -UAPs - Fixed AP does not restart properly after having a long uptime. -UAPs - Do not forward switch BPDU to Stations. -UAP(except UAP-AC) - Fixed Access Request missing some mandatory attributes with Radius Server. -UAP - Improve Wireless Uplink connection issues. -UAP - Improvements to Zero Handoff(ZH) dropping packets when client is in the middle of two APs. -UAP - Improvements to Zero Handoff(ZH) dropping packets in some specific cases due to ACK collisions from the other ZH APs. -UAP - Disable 802.11d country IE in beacon. -UAP - Fixed failed to establish wireless uplink due to too many APs around. -UAP - Fixed Zero Handoff(ZH) ping ponging effect when in the middle of APs. -UAP - Fixed Zero Handoff(ZH) to synchronize beacon sequence number. -UAP-PRO/Outdoor - Fixed secondary port when VLAN enabled limited to MTU=1468. -- UniFi - 3.1.10-RC is Released From 3.1.9->3.1.10 -Controller - Fixed XSS Vulnerability. -Controller - Only request DHCP for guest VLAN when guest portal is enabled. -Controller - Fixed migration issue that causes controller not to see previously adopted APs from v2 to v3. -Controller - Updated copyright date to 2014. -Controller - Enhancement to detect network interface state change in 60 seconds. -UTIL - Fixed UniFi Discovery Tool failing to see any APs. -UAP-AC - Fixed 2Ghz radio intermittently getting into a stuck state in long/heavy stress. -UAP-AC - Fixed 5Ghz radio intermittently getting into a stuck state in long/heavy stress. -UAP-AC - Fixed some station information passed from driver to controller. -UAP-AC - Fixed clients randomly disconnecting from the 5Ghz radio. -UAP-AC - Fixed 5Ghz performances slows to a crawl. -UAP-AC - Fixed long ping times every 10 seconds from the 2Ghz radio. -UAP-AC - Fixed 2Ghz performances slows to a crawl. -UAP-AC - Fixed rate selection on subsequent AMPDU TX. -UAP-AC - Fixed a 2Ghz performance instability issue. -UAP-AC - Fixed EIRP reporting issue. -UAP-AC - Fixed 2Ghz RSSI reporting error. -UAP-AC - Fixed DHCP failure due to wrong default configuration. -UAP-PRO - Fixed 16 clients in power save/uAPSD will cause AP to start dropping Ethernet frames therefore disconnecting from controller. -UAP-PRO - If a total of 8 VAPs are created, QOS rule for the 8th one is not created. -UAP-PRO - Fixed system crash causing reboots when certain sysconfig is applied. -UAP-PRO/Outdoor - Fixed second Ethernet port not working. -UAP - Fixed client rate limiting function does not work when greater than 10 clients. -UAP - Fixed incorrect QoS ClassID. -UAP - Fixed default user group bandwidth limiting is not working when applying a rate limit then back to unlimited bandwidth. -UAP - Fixed vulnerability in BusyBox that may allow someone in control of a DHCP server to run arbitrary code. -UAP - Fixed reporting abgn modes properly to controller. -UAP(except UAP-AC) - Fixed Wireless Uplink stuck in isolation. -UAP(except UAP-AC) - Fixed Wireless Uplink randomly disconnects. -UAP(except UAP-AC) - Fixed Zero Handoff causes random disconnects due to multicast traffic. -UAP(except UAP-AC) - Fixed Zero Handoff causes lower than expected throughput. -UAP(except UAP-AC) - Fixed Zero Handoff causes huge amount of spectrum use. -UAP-LR - Fixed transmit power reading to be inconsistent between v2 and v3 controller. -- UniFi - 3.1.9-beta is Released From 3.1.8->3.1.9 -Installer - no longer install JRE for the user, redirect the user to Sun's website instead. -Controller - fix SMTP port showing 25/465 even if it's customized -AP - fix firmware upgrade issue where the Ethernet interface occasionally (1%) failed to start after rebooting. -AP - improve firmware upgrade reliability for UAP, UAP-LR and UAP-Outdoor -AP - upgrade dropbear from v0.51 to v2013.59 for improved security. -UAP - fix 802.1x roaming failure in Zero Handoff. -UAP-AC - SDK upgrade. -UAP-AC - fix rogue ap on CH 0 (ng). -UAP-AC - fix the issue of abnormal positive stations signal strength. -UAP-AC - fix the issue of failing to set 2.4G HT40 channel. -- UniFi - 3.1.8-beta is Released From 3.1.6->3.1.7 -Controller - fix favicon. -Controller - fix missing notes for hotspot operators. -Controller - fix Quickpay refund. -Controller - for Authorize, make sure refund is available within 120 days. -Controller - allow backup to specify days. -Controller - fix unicode SSID support. -Controller - remove 3000 stations limitation. -Controller - use 127.0.0.1 when click on Launch button. -Controller - allow promoting of super admin in system.properties. -UAP-AC - SDK upgrade. -UAP-AC - 2G performance improvement. -UAP-AC - fix performance impact due to antennas state. -UAP-AC - fix clients fail to roam back in enterprise security wlan. -UAP-AC - fix 11g client shown with 11b icon on Controller. -UAP-AC - avoid tinysnmpd respawn repeatedly. -UAP - fix kick a station in wireless uplink will cause downlink ap dropped. -UAP - fix WEP performance. -UAP - wireless uplink migration from V2->v3. -PICOM2 - fix picoM2 max power drop. From 3.1.7->3.1.8 -Controller - use Get for payment URL forwarding. -Controller - use UTF-8 for portal page. -UAP - fix Guest Portal redirector (borken in v3.1.7). -UAP-AC - add rogue AP scan. -- UniFi 3.1.6-beta is released From 3.1.5->3.1.6 -Controller - in Performance View, instead of showing "Num Clients" again, show 2G Clients and 5G clients. -Controller - fix the issue of Nokia Lumia 920 cannot connect to ZH wlan. -Controller - add the missing name/address fields for Stripe. -Controller - fix map upload problem. -Controller - fix the issue of deleting “” user from a user group. -AP - support non-ASCII SSID. -AP - disable randomize-case in DNS lookup for compatibility. -UAP-AC - add broadcast/multicast bypass filter for ARP and DHCP packets. -UAP-AC - AMPDU stability improvement. -- UniFi 3.1.5-beta is released From 3.1.4->3.1.5 -Controller - all columns are now left aligned. -Controller - fix false error message when lauching controller - "Start up Failed, port 8080 is used by another program". -Controller - fix the issue of unable to remove wireless uplink. -Controller - security enhancements (reported by Luca Carettoni). -Controller - avoid submitting 2+ times in default portal page where iOS devices will fail to be redirected. -Controller - add new configuration: whether to show up the pop-up dialog when an iOS device associating to a guest wlan. -Controller - fix the issue of controller shows wireless uplink in incorrect channel. -Controller - fix the wireless uplink issue where downlink ap stays in the disconnected state rather than isolated state. -Controller - fix AP dialog where Ethernet Activities is showing 0 B/sec. -Controller - add new coniguration: allow to disable broadcast filter. Disabling it will degrade wlan performance. -UAP-AC - fix auto channel selection - previously if set it to HT80/Auto, the AP will be set in HT20. -UAP-AC - fix WEP issue where hex key fails whenever letter a-f being used in the key. -UAP-AC - stability improvement. -UAP-AC - include SSID in RADIUS attribute 'Called Station Identifier.' -UAP-AC - auto channel selection chooses only channels 1, 6 and 11. -UAP - remove DAD (duplicated address detection) arp. -UAP - fix fd/socket leakage. -UAP - fix the issue of selfrun_guest_mode=off configuration that is not working previously. -UAP - v3 stability improvements. -UAP - fix Realtek RTL8188CE issue. -UAP - allow to disable pmksa caching through config. -UAP-PRO - fix the issue of wireless uplink cannot be established in DFS channels. -UAP-PRO - fix wireless uplink issue using DFS channels where downlink PRO stucks whenever uplink PRO restarts. Known Issues -seamless upgrade V2's wireless uplinks to V3 is not working yet -- UniFi 3.1.4-beta is released From 3.1.3->3.1.4 -improve UAP stability and reliability -fix UAP-AC's 5G connectivity issue for newer Macbook Air with 11ac chip -fix Windows service launching issue with Java 7 -improve Windows Installer upgrade -UI enhancements -- UniFi 3.1.3-beta is released From 3.1.2->3.1.3 -fix UAP-AC (US version) 5G radio issue introduced in 3.1.2 -fix 4th ssid with vlan not working issue -add MerchantWarrior (Australia, New Zealand) -- UniFi 3.1.2-beta is released From 3.1.1->3.1.2 -fix VLAN issue with wireless uplink -fix a few zero-handoff bugs -fix TX-Power calculation -fix RADIUS accounting byte/pkt count -rolling upgrading improvement -Add QuickPay and Authorized.Net support -- UniFi 3.1.1-beta is Released UniFi 3.1.1 is the first public beta release. Release Note -Starting from 3.1.1, UniFi controller will honor "Automatic Firmware Upgrade" settings. APs with incompatible versions will show up as "Connected (needs upgrade)" where no provision will be performed -A new wireless uplink is introduced, you would need to upgrade the isolated/downlink AP first. -The new wireless uplink has problem with VLANs if you have it configured with wireles networks. A fix is being worked on. -- UniFi - Beta Release 3.0.2 Release Note -starting from 3.0.2, UniFi controller will honor "Automatic Firmware Upgrade" settings -a new wireless uplink is introduced, you would need to upgrade the isolated AP first Changes from 3.0.1->3.0.2 -new/faster wireless uplink -UAP-Pro wireless uplink support (UAP-Pro can use its 5G as uplink or take 8 wireless downlinks) -add UAP-AC support -additional payment gateway support - Stripe -roaming support - PMK-Caching -add Access Points -> Performance view (see note 2 at bottom) -rolling upgrade support - which automatically upgrades APs one by one (and leave wireless uplinks peers alone by design) -UI related issues (broken css loading, etc) -- UniFi - Beta Release 3.0.1 Changes from 3.0.0->3.0.1 -SNMP now working -minimum RSSI now working (see note 1 at bottom) -allow moving AP from one site to another -fix wireless uplink issue -allow DNS suffix to be configured when Static IP is used -enhanced roaming experience for clients that don't properly de-associate -add Insights->Past Wireless Connections -add Insights->Past Guest Authorizations -add "Config" view in Access Point tab -fix other reported issues (UI, cert generation, hotspot manager) -- UniFi - Beta Release 3.0.0 New Features Multi-site management, read-only admin support -Instead of running multiple controllers, now you can use one controller to manage multiple sites. -Each site has its own configurations, maps, statistics, guest portals and is logically separated. -Moreover, you can delegate administrative rights (readonly/readwrite) to other people. Seamless Roaming - Zero-Handoff -Running radios on the same channel with the same BSSID. -No controller is required for its operation. WLAN Groups -Now you can create multiple WLAN groups and assign them to an AP's radio. -Minimum RSSI, Load Balancing becomes options per WLAN group. Other Features -Rogue AP detection -more descriptive email alerts -basic SNMP support -Minimum RSSI -enhanced load balanding per radio -voucher customization -ability to reset current statistic -allow the config to stay during uninstall for Windows -controller performance enhancement -- UniFi 2.4.6 is released UniFi 2.4.6 is a stable/maintenance release. We will keep maintaining V2 until V3 is stable. Release Note -Controller - relax email address checking. -Controller - fix double billing if clicked twice. -Controller - fix false error message when lauching controller - "Start up Failed, port 8080 is used by another program". -Controller - relax JRE requirement to 1.6. -Controller - fix navigation to payment.html page issue. -UAP-AC - backport v3 commits. -UAP-Outdoor+/UAP-AC Outdoor - add new AP model support. -UAP-PRO - stability improvements. From 2.3.9->2.4.5 -fix an issue (especially for UAP-Outdoor or Pico in high-interference environments) where AP stops accepting clients as their perceived signal drops -fix AP appears disconnected while still serving clients in certain environments -fix guests get redirected back to login page when controller's time differs from AP time -fix map uploading issue in some scenarios -fix 4th ssid with vlan not working issue -fix UAP-AC (US version) 5G radio issue introduced in 2.4.3 -fix UAP-AC's 5G connectivity issue for newer Macbook Air with 11ac chip -fix Windows service launching issue with Java 7 -- UniFi 2.4.5 is released Release Note -fix an issue (especially for UAP-Outdoor or Pico in high-interference environments) where AP stops accepting clients as their perceived signal drops -fix AP appears disconnected while still serving clients in certain environments -fix guests get redirected back to login page when controller's time differs from AP time -fix map uploading issue in some scenarios -fix 4th ssid with vlan not working issue -fix UAP-AC (US version) 5G radio issue introduced in 2.4.3 -fix UAP-AC's 5G connectivity issue for newer Macbook Air with 11ac chip -fix Windows service launching issue with Java 7 From 2.4.4->2.4.5 -fix UAP-AC's 5G connectivity issue for newer Macbook Air with 11ac chip -fix Windows service launching issue with Java 7 -- UniFi 2.4.4 is released Release Note -fix a issue (especially for UAP-Outdoor or Pico in high-interference environments) where AP stops accepting clients as their perceived signal drops -fix AP appers disconnected while still serving clients in certian environments -fix guests get redirected back to login page when controller's time differs from AP time -fix map uploading issue in some scenarios -fix UAP-AC (US version) 5G radio issue introduced in 2.4.3 -fix 4th ssid with vlan not working issue -- UniFi 2.4.3 is released Release Note -fix a issue (especially for UAP-Outdoor or Pico in high-interference environments) where AP stops accepting clients as their perceived signal drops -fix AP appers disconnected while still serving clients in certian environments -fix guests get redirected back to login page when controller's time differs from AP time -fix map uploading issue in some scenarios -- Release 2.3.9 2.3.9 is released as a hotfix to 2.3.8. Release Note -fix AP stopping accepting client issue in certain environments -AP reset-default improvement - holding reset button during booting up (until LED turns off) to reset the config -UAP-Pro performance and compability improvements -allow Guest wireless to be turned off when controller is not reachable (see FAQ) -allow more flexible capitive portal subnets to be added (see FAQ) -controller performance improvement UI enhancements NOTE: Starting from 2.3.9, auto-upgrade is turned off by default. A rolling-upgrade mechanism is in the work. -- Release 2.3.8 Release Note -bandwidth limiting enhancement (make it more in sync with results from speedtest or wget, etc) -portal redirect enhancements -enhanced adoption/handling when DNS is not reachable -enable UAP-Outdoor's secondary ethernet port -allow connectivity/uplink monitor to be disabled completely (for people who don't use wireless uplink and don't want wireless to be disabled when -gateway is not reachable) -fix controller stopping issue when installed as Windows service -Google Map fix - allows map type selection, saves as image (this is more of a workaround, before we get rid of Flash) -Paypal to allow other currency -add Ubuntu 12.04 (precise) support -add Java 7 support -fix for wireless uplink and PicoM2->UniFi conversion for newer units with DC:9FMan Very HappyB OUI -VoIP enhancement (mapping DSCP 46 to Voice, for getontoit) -UI enhancements detailed change logs since 2.2.5 From 2.2.5->2.3.2 -bandwidth limiting enhancement (make it more in sync with results from speedtest or wget, etc) -portal redirect enhancements -enhanced adoption/handling when DNS is not reachable -enable UAP-Outdoor's secondary ethernet port -Paypal to allow other currency -allow connectivity/uplink monitor to be disabled completely (for people who don't use wireless uplink and don't want wireless to be disabled when -gateway is not reachable) -fix controller stopping issue when installed as Windows service -UI enhancements From 2.3.2 -> 2.3.3 -fix guest bypassing guest portal -fix UniFi start-up problem with fresh installation using Java 7 -add Ubuntu 12.04 (precise) support -fix SSID validation -fix Paypal processing of Master Card -fix incorrect client count in the statistics -allow mail sender to be configurable for sending alerts From 2.3.3 -> 2.3.4 -fix DHCP option 43 broken in 2.3.x -Google Map fix - allows map type selection, saves as image (this is more of a workaround, before we get rid of Flash) From 2.3.4 -> 2.3.5 -SSID to allow all printable characters -fix last-seen in All Clients tab (add Disconnected/All filter as well) -minor UI fixes From 2.3.5 -> 2.3.6 -fix issues around wireless uplink and adoption for newer units with DC:9FMan Very HappyB OUI -use 64-bit JRE if installed -make Allowed Subnets more flexible (which in turn enables AirPrint in the guest network) -VoIP enhancement (mapping DSCP 46 to Voice, for getontoit) -portal redirect enhancements (thanks to jaffadog and coastcruiser) -security enhancements (credit to Moritz Frenzel) From 2.3.6 -> 2.3.8 -fix the PicoM2 -> UniFi conversion for newer units with DC:9F:DB OUI -- Release 2.2.5 2.2.5 addresses a few outstanding issues since 2.2.0. Release Note -fix AP reboots issue -fix guest redirect problem after authorized -fix iOS guest redirect -fix wireless uplink issue in L3 deployments -Controller performance improvement -fix SMTP send email problem -Use 64-bit mongod in Windows whenever possible -UI: fix UI issue on older browsers (Firefox 3.6, Safari 5.0.x) -more flexible subnet configuration -fix Map disappear after logout -add 2-hour trial into portal sample page -allow ASCII WEP key -- Release 2.2.1 Release 2.2.1 is deemed not reliable. See Release 2.2.3. Release Note -SMTP send email problem -Controller performance improvement -Use 64-bit mongod in Windows whenever possible -UI: fix UI issue on older browsers (Firefox 3.6, Safari 5.0.x) -more flexible subnet configuration -fix Map disappear after logout -allow ASCII WEP key -- Release 2.2.0 New Features Wireless Uplink -Supports wireless uplink, each wired AP can have up to 4 downlinks -Allows runtime change of network topology -Allows wireless adoption of 2.0.0 APs in default state L3 Manageability -Allows the controller to run in a different subnet -Allows no-touch AP provisioning by using DHCP Option 43 or DNS -Provides UniFi Discovery utility to make local AP to inform back to the controller in NOC or Cloud Hotspot with Billing and Customization -Built-in support for billing integration (Paypal) accepting major credit cards and paypal, teaser package -Built-in support for voucher-base authentication -Built-in hotspot manager for voucher creation, guest management, payment refund -Allows full customization of portal pages -API support for voucher generation, guest authorization, guest unauthorization, etc. Rate Limiting -You can limit the upload / download speed per WLAN. You can even override it per user. -Allow different rate-limiting and usage-limiting for each hotspot package Other Features -Better/finer TX Power control -Advanced WPA settings - WPA1-Only / WPA2-Only, TKIP / CCMP(AES). Allow all printable characters for Passphrase -WLAN Override: add enable/disable, PSK override -Google Map integration (you can use Google Map in the Map view) -Load balancing (specifying desired number of clients per AP) -Offline client management -Allowed/whitelisted subnets for guest access -Running UniFi as Windows service -Shows "Managed by Other" for APs that were managed by old controller. An "advanced adoption" option is added to allow take-over. -Email notification for alerts -SSL certificate import -More API support -- Release 1.3.2 Release Notes - fix static IP issue - fix WLAN override issue - allow guest expiration to be set for guest portal - UI enhancements - TX power respecting EIRP at all time (UniFi AP) -- Release 1.3.0 Release Notes - allow special characters for admin password / WLAN SSID and PSK - static IP per ap - WLAN override per AP (VLAN, SSID) - supports PicoM2 - allow LED to be disabled - fix the blackberry device connection problem -- Release 1.2.3 Release Notes 1. fix the latency issue with iPad, iPod4 and other mobile devices that are very aggressive with power-saving 2. Andriod phone connection problem 3. guest portal redirect crashing Andriod browser 4. fix the heartbeat interval 5. debian package (debian 5 - debian 6, ubuntu 9.04 - ubuntu 11.04) -- Release 1.2.2 Release Notes 1. VLAN issue fixed (returning vlan traffic should be forwarded correctly) 2. fixed AP stuck at adoption state and improved adoption speed (turn Auto Firmware Upgrade "on" for best result) 3. fixed manual AP's channel selection for certain country codes (e.g. Australia) 4. enhance wireless performance (especially for power-saving clients) 5. added UAP-LR support 6. accepts Database Backup from different versions (1.2.0 and 1.2.1) -- Release 1.2.1 Release 1.2.1 is the first mass production version of UniFi. Release Notes 1. fix the problem where in-bound VLAN traffic not being forwarded correctly 2. fix the qos setting not taking effect 3. enhance wireless performance and stability 4. handle mobile devices (especially in power-saving mode) better 5. general bug fixes, UI enhancements, etc. 6. bg / n device and their power-saving status at a glance